@@ -1,6 +1,9 @@
/dts-v1/;
/ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
chosen {
stdout-path = "/serial";
};
@@ -131,4 +134,27 @@
num-gpios = <20>;
};
+ spi@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,spi";
+ cs-gpios = <0>, <&gpio_a 0>;
+ flash@0 {
+ reg = <0>;
+ compatible = "spansion,m25p16", "sandbox,spi-flash";
+ spi-max-frequency = <40000000>;
+ sandbox,filename = "spi.bin";
+ };
+ };
+
+ cros-ec@0 {
+ compatible = "google,cros-ec";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ firmware_storage_spi: flash@0 {
+ reg = <0 0x400000>;
+ };
+ };
+
};
new file mode 100644
@@ -0,0 +1,25 @@
+* MTD SPI driver for serial flash chips
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- compatible : Should be the manufacturer and the name of the chip. Bear in
+ mind that the DT binding is not U-Boot-only, but in case of
+ U-Boot, see spi_flash_params_table table in
+ drivers/mtd/spi/sf_params.c for the list of supported chips.
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Optional properties:
+ - memory-map : Address and size of the flash, if memory mapped. This may
+ apply to Intel chipsets, which tend to memory-map flash.
+
+Example:
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
Add a SPI device which can be used for testing SPI flash features in sandbox. Also add a cros_ec device since with driver model the Chrome OS EC emulation will not otherwise be available. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v3: None Changes in v2: - Adjust binding to avoid Linux-specific mentions arch/sandbox/dts/sandbox.dts | 26 ++++++++++++++++++++++++++ doc/device-tree-bindings/mtd/spi/spi-flash.txt | 25 +++++++++++++++++++++++++ 2 files changed, 51 insertions(+) create mode 100644 doc/device-tree-bindings/mtd/spi/spi-flash.txt