From patchwork Mon Nov 11 19:12:19 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wolfgang Denk X-Patchwork-Id: 290469 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id B13512C00B6 for ; Tue, 12 Nov 2013 06:12:54 +1100 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 7A19F4A5E4; Mon, 11 Nov 2013 20:12:53 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id qqEdNNgbcFrj; Mon, 11 Nov 2013 20:12:53 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id A63634A5D4; Mon, 11 Nov 2013 20:12:49 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 3B5004A5D2 for ; Mon, 11 Nov 2013 20:12:44 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id vdzqTfl9mObD for ; Mon, 11 Nov 2013 20:12:39 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9]) by theia.denx.de (Postfix) with ESMTPS id 5BA234A5CF for ; Mon, 11 Nov 2013 20:12:33 +0100 (CET) Received: from frontend1.mail.m-online.net (unknown [192.168.8.180]) by mail-out.m-online.net (Postfix) with ESMTP id 3dJMD10gVmz4KK5y; Mon, 11 Nov 2013 20:12:33 +0100 (CET) Received: from localhost (dynscan1.mnet-online.de [192.168.6.68]) by mail.m-online.net (Postfix) with ESMTP id 3dJMD10QrHzbbcS; Mon, 11 Nov 2013 20:12:33 +0100 (CET) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from smtp-auth.mnet-online.de ([192.168.8.180]) by localhost (dynscan1.mail.m-online.net [192.168.6.68]) (amavisd-new, port 10024) with ESMTP id mdwX2BZGKMpe; Mon, 11 Nov 2013 20:12:26 +0100 (CET) X-Auth-Info: nCxukgu8tgdNGZZRBqQUx1qSZsfHr+nLO7q1PJLMOzI= Received: from diddl.denx.de (host-80-81-18-216.customer.m-online.net [80.81.18.216]) by smtp-auth.mnet-online.de (Postfix) with ESMTPA; Mon, 11 Nov 2013 20:12:26 +0100 (CET) Received: from gemini.denx.de (gemini.denx.de [10.0.0.2]) by diddl.denx.de (Postfix) with ESMTP id B72FE1A63AA; Mon, 11 Nov 2013 20:12:26 +0100 (CET) Received: by gemini.denx.de (Postfix, from userid 500) id 82673380403; Mon, 11 Nov 2013 20:12:26 +0100 (MET) From: Wolfgang Denk To: u-boot@lists.denx.de Date: Mon, 11 Nov 2013 20:12:19 +0100 Message-Id: <1384197139-7991-1-git-send-email-wd@denx.de> X-Mailer: git-send-email 1.8.3.1 Cc: Tom Rini , Wolfgang Grandegger Subject: [U-Boot] [PATCH] MPC824x: remove obsolete "PN62" board X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de The MPC824x processors have long reached EOL, and the PN62 board has not seen any board-specific updates for more than a decade. It is now causing build issues. Instead of wasting time on things nobody is interested in any more, we rather drop this board. Signed-off-by: Wolfgang Denk Cc: Wolfgang Grandegger cc: Tom Rini --- Tom, as there is zero activity for the MPC82xx tree I don't invest the efforts in pushing this patch there and then sending a pull request. Can you please apply it directly? Thanks in advance -- wd CREDITS | 2 +- arch/powerpc/cpu/mpc824x/cpu_init.c | 6 +- board/pn62/Makefile | 8 - board/pn62/cmd_pn62.c | 146 ------------------ board/pn62/misc.c | 219 --------------------------- board/pn62/pn62.c | 171 ---------------------- board/pn62/pn62.h | 145 ------------------ boards.cfg | 1 - doc/README.scrapyard | 3 +- drivers/net/pcnet.c | 10 -- include/configs/PN62.h | 285 ------------------------------------ 11 files changed, 5 insertions(+), 991 deletions(-) delete mode 100644 board/pn62/Makefile delete mode 100644 board/pn62/cmd_pn62.c delete mode 100644 board/pn62/misc.c delete mode 100644 board/pn62/pn62.c delete mode 100644 board/pn62/pn62.h delete mode 100644 include/configs/PN62.h diff --git a/CREDITS b/CREDITS index 3b657e9..52f289e 100644 --- a/CREDITS +++ b/CREDITS @@ -143,7 +143,7 @@ W: www.freescale.com N: Dr. Wolfgang Grandegger E: wg@denx.de -D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards +D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards W: www.denx.de N: Peter Figuli diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c index 37d796e..47ac18e 100644 --- a/arch/powerpc/cpu/mpc824x/cpu_init.c +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -52,7 +52,7 @@ cpu_init_f (void) CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ -#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62) +#if defined(CONFIG_MUSENKI) /* Why is this here, you ask? Try, just try setting 0x8000 * in PCIACR with CONFIG_WRITE_HALFWORD() * this one was a stumper, and we are annoyed @@ -142,9 +142,7 @@ cpu_init_f (void) CONFIG_READ_WORD(PICR2, val); val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ -#ifndef CONFIG_PN62 val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ -#endif CONFIG_WRITE_WORD(PICR2, val); CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR); @@ -186,7 +184,7 @@ cpu_init_f (void) * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if * its not set, we define it to zero in this file */ -#if defined(CONFIG_CU824) || defined(CONFIG_PN62) +#if defined(CONFIG_CU824) CONFIG_WRITE_WORD(MCCR4, (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | diff --git a/board/pn62/Makefile b/board/pn62/Makefile deleted file mode 100644 index 7572ed8..0000000 --- a/board/pn62/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = pn62.o cmd_pn62.o misc.o diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c deleted file mode 100644 index a0326b4..0000000 --- a/board/pn62/cmd_pn62.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include "pn62.h" - -#if defined(CONFIG_CMD_BSP) - -/* - * Command led: controls the various LEDs 0..11 on the PN62 card. - */ -int do_led(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[]) -{ - unsigned int number, function; - - if (argc != 3) - return cmd_usage(cmdtp); - - number = simple_strtoul(argv[1], NULL, 10); - if (number > PN62_LED_MAX) - return 1; - - function = simple_strtoul(argv[2], NULL, 16); - set_led(number, function); - return 0; -} -U_BOOT_CMD( - led , 3, 1, do_led, - "set LED 0..11 on the PN62 board", - "i fun" - " - set 'i'th LED to function 'fun'" -); - -/* - * Command loadpci: loads a image over PCI. - */ -#define CMD_MOVE_WINDOW 0x1 -#define CMD_BOOT_IMAGE 0x2 - -int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *s; - ulong addr = 0, count = 0; - u32 off; - int cmd, rcode = 0; - - /* pre-set load_addr */ - if ((s = getenv("loadaddr")) != NULL) { - addr = simple_strtoul(s, NULL, 16); - } - - switch (argc) { - case 1: - break; - case 2: - addr = simple_strtoul(argv[1], NULL, 16); - break; - default: - return cmd_usage(cmdtp); - } - - printf ("## Ready for image download ...\n"); - - show_startup_phase(12); - - while (1) { - /* Alive indicator */ - i2155x_write_scrapad(BOOT_PROTO, BOOT_PROTO_READY); - - /* Toggle status LEDs */ - cmd = (count / 200) % 4; /* downscale */ - set_led(4, cmd == 0 ? LED_1 : LED_0); - set_led(5, cmd == 1 ? LED_1 : LED_0); - set_led(6, cmd == 2 ? LED_1 : LED_0); - set_led(7, cmd == 3 ? LED_1 : LED_0); - udelay(1000); - count++; - - cmd = i2155x_read_scrapad(BOOT_CMD); - - if (cmd == BOOT_CMD_MOVE) { - off = i2155x_read_scrapad(BOOT_DATA); - off += addr; - i2155x_set_bar_base(3, off); - printf ("## BAR3 Addr moved = 0x%08x\n", off); - i2155x_write_scrapad(BOOT_CMD, ~cmd); - show_startup_phase(13); - } - else if (cmd == BOOT_CMD_BOOT) { - set_led(4, LED_1); - set_led(5, LED_1); - set_led(6, LED_1); - set_led(7, LED_1); - - i2155x_write_scrapad(BOOT_CMD, ~cmd); - show_startup_phase(14); - break; - } - - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - printf("\nAbort\n"); - return 0; - } - - } - - /* Repoint to the default shared memory */ - i2155x_set_bar_base(3, PN62_SMEM_DEFAULT); - - load_addr = addr; - printf ("## Start Addr = 0x%08lx\n", addr); - - show_startup_phase(15); - - /* Loading ok, check if we should attempt an auto-start */ - if (((s = getenv("autostart")) != NULL) && (strcmp(s,"yes") == 0)) { - char *local_args[2]; - local_args[0] = argv[0]; - local_args[1] = NULL; - - printf ("Automatic boot of image at addr 0x%08lX ...\n", - load_addr); - rcode = do_bootm (cmdtp, 0, 1, local_args); - } - - return rcode; -} - -U_BOOT_CMD( - loadpci, 2, 1, do_loadpci, - "load binary file over PCI", - "[addr]\n" - " - load binary file over PCI to address 'addr'" -); - -#endif diff --git a/board/pn62/misc.c b/board/pn62/misc.c deleted file mode 100644 index 98e0dfa..0000000 --- a/board/pn62/misc.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#include "pn62.h" - -typedef struct { - pci_dev_t devno; - volatile u32 *csr; - -} i2155x_t; - -static i2155x_t i2155x = { 0, NULL }; - -static struct pci_device_id i2155x_ids[] = { - { 0x1011, 0x0046 }, /* i21554 */ - { 0x8086, 0xb555 } /* i21555 */ -}; - -int i2155x_init(void) -{ - pci_dev_t devno; - u32 val; - int i; - - /* - * Find the Intel bridge. - */ - if ((devno = pci_find_devices(i2155x_ids, 0)) < 0) { - printf("Error: Intel bridge 2155x not found!\n"); - return -1; - } - i2155x.devno = devno; - - /* - * Get auto-configured base address for CSR access. - */ - pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &val); - if (val & PCI_BASE_ADDRESS_SPACE_IO) { - val &= PCI_BASE_ADDRESS_IO_MASK; - i2155x.csr = (volatile u32 *)(_IO_BASE + val); - } else { - val &= PCI_BASE_ADDRESS_MEM_MASK; - i2155x.csr = (volatile u32 *)val; - } - - /* - * Translate downstream memory 2 (bar3) to base of shared memory. - */ - i2155x_set_bar_base(3, PN62_SMEM_DEFAULT); - - /* - * Enable memory space, I/O space and bus master bits - * in both Primary and Secondary command registers. - */ - val = PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_IO; - pci_write_config_word(devno, 0x44, val); - pci_write_config_word(devno, 0x04, val); - - /* - * Clear scratchpad registers. - */ - for (i = 0; i < (I2155X_SCRAPAD_MAX - 1); i++) { - i2155x_write_scrapad(i, 0x0); - } - - /* - * Set interrupt line for Linux. - */ - pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 3); - - return 0; -} - -/* - * Access the Scratchpad registers 0..7 of the Intel bridge. - */ -void i2155x_write_scrapad(int idx, u32 val) -{ - if (idx >= 0 && idx < I2155X_SCRAPAD_MAX) - out_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx, val); - else - printf("i2155x_write_scrapad: invalid index\n"); -} - -u32 i2155x_read_scrapad(int idx) -{ - if (idx >= 0 && idx < I2155X_SCRAPAD_MAX) - return in_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx); - else - printf("i2155x_read_scrapad: invalid index\n"); - return -1; -} - -void i2155x_set_bar_base(int bar, u32 base) -{ - if (bar >= 2 && bar <= 4) { - pci_write_config_dword(i2155x.devno, - I2155X_BAR2_BASE + (bar - 2) * 4, - base); - } -} - -/* - * Read Vital Product Data (VPD) from the Serial EPROM attached - * to the Intel bridge. - */ -int i2155x_read_vpd(int offset, int size, unsigned char *data) -{ - int i, n; - u16 val16; - - for (i = 0; i < size; i++) { - pci_write_config_word(i2155x.devno, I2155X_VPD_ADDR, - offset + i - I2155X_VPD_START); - for (n = 10000; n > 0; n--) { - pci_read_config_word(i2155x.devno, I2155X_VPD_ADDR, &val16); - if ((val16 & 0x8000) != 0) /* wait for completion */ - break; - udelay(100); - } - if (n == 0) { - printf("i2155x_read_vpd: TIMEOUT\n"); - return -1; - } - - pci_read_config_byte(i2155x.devno, I2155X_VPD_DATA, &data[i]); - } - - return i; -} - -static struct pci_device_id am79c95x_ids [] = { - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE }, - { } -}; - - -/* - * Initialize the AMD ethernet controllers. - */ -int am79c95x_init(void) -{ - pci_dev_t devno; - int i; - - /* - * Set interrupt line for Linux. - */ - for (i = 0; i < 2; i++) { - if ((devno = pci_find_devices(am79c95x_ids, i)) < 0) - break; - pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 2+i); - } - if (i < 2) - printf("Error: Only %d AMD Ethernet Controller found!\n", i); - - return 0; -} - - -void set_led(unsigned int number, unsigned int function) -{ - volatile u8 *addr; - - if ((number >= 0) && (number < PN62_LED_MAX) && - (function >= 0) && (function <= LED_LAST_FUNCTION)) { - addr = (volatile u8 *)(PN62_LED_BASE + number * 8); - out_8(addr, function&0xff); - } -} - -/* - * Show fatal error indicated by Kinght Rider(tm) effect - * in LEDS 0-7. LEDS 8-11 contain 4 bit error code. - * Note: this function will not terminate. - */ -void fatal_error(unsigned int error_code) -{ - int i, d; - - for (i = 0; i < 12; i++) { - set_led(i, LED_0); - } - - /* - * Write error code. - */ - set_led(8, (error_code & 0x01) ? LED_1 : LED_0); - set_led(9, (error_code & 0x02) ? LED_1 : LED_0); - set_led(10, (error_code & 0x04) ? LED_1 : LED_0); - set_led(11, (error_code & 0x08) ? LED_1 : LED_0); - - /* - * Yay - Knight Rider effect! - */ - while(1) { - unsigned int delay = 2000; - - for (i = 0; i < 8; i++) { - set_led(i, LED_1); - for (d = 0; d < delay; d++); - set_led(i, LED_0); - } - - for (i = 7; i > 0; i--) { - set_led(i, LED_1); - for (d = 0; d < delay; d++); - set_led(i, LED_0); - } - } -} diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c deleted file mode 100644 index 81829dd..0000000 --- a/board/pn62/pn62.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#include "pn62.h" - -DECLARE_GLOBAL_DATA_PTR; - -static int get_serial_number (char *string, int size); -static void get_mac_address(int id, u8 *mac); - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -void show_boot_progress (int phase) -{ - /* - * Show phases of the bootm command on the front panel - * LEDs and the scratchpad register #3 as well. We use - * blinking LEDs for logical "1". - */ - if (phase > 0) { - set_led (8, (phase & 0x1) ? LED_SLOW_CLOCK : LED_0); - set_led (9, (phase & 0x2) ? LED_SLOW_CLOCK : LED_0); - set_led (10, (phase & 0x4) ? LED_SLOW_CLOCK : LED_0); - set_led (11, (phase & 0x8) ? LED_SLOW_CLOCK : LED_0); - } - i2155x_write_scrapad (BOOT_STATUS, phase); - if (phase < 0) - i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR); -} -#endif - -void show_startup_phase (int phase) -{ - /* - * Show the phase of U-Boot startup on the front panel - * LEDs and the scratchpad register #3 as well. - */ - if (phase > 0) { - set_led (8, (phase & 0x1) ? LED_1 : LED_0); - set_led (9, (phase & 0x2) ? LED_1 : LED_0); - set_led (10, (phase & 0x4) ? LED_1 : LED_0); - set_led (11, (phase & 0x8) ? LED_1 : LED_0); - } - i2155x_write_scrapad (BOOT_STATUS, phase); - if (phase < 0) - i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR); -} - -int checkboard (void) -{ - show_startup_phase (1); - puts ("Board: PN62\n"); - return 0; -} - -phys_size_t initdram (int board_type) -{ - long size; - long new_bank0_end; - long mear1; - long emear1; - - show_startup_phase (2); - - size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - new_bank0_end = size - 1; - mear1 = mpc824x_mpc107_getreg (MEAR1); - emear1 = mpc824x_mpc107_getreg (EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg (MEAR1, mear1); - mpc824x_mpc107_setreg (EMEAR1, emear1); - - return (size); -} - -/* - * Initialize PCI Devices. We rely on auto-configuration. - */ -#ifndef CONFIG_PCI_PNP -#error "CONFIG_PCI_PNP is not defined, please correct!" -#endif - -struct pci_controller hose = { -}; - -void pci_init_board (void) -{ - show_startup_phase (4); - pci_mpc824x_init (&hose); - - show_startup_phase (5); - i2155x_init (); - show_startup_phase (6); - am79c95x_init (); - show_startup_phase (7); -} - -int misc_init_r (void) -{ - char str[20]; - u8 mac[6]; - - show_startup_phase (8); - /* - * Get serial number and ethernet addresses if not already defined - * and update the board info structure and the environment. - */ - if (getenv ("serial#") == NULL && - get_serial_number (str, strlen (str)) > 0) { - setenv ("serial#", str); - } - show_startup_phase (9); - - if (!eth_getenv_enetaddr("ethaddr", mac)) { - get_mac_address(0, mac); - eth_setenv_enetaddr("ethaddr", mac); - } - show_startup_phase (10); - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", mac)) { - get_mac_address(1, mac); - eth_setenv_enetaddr("eth1addr", mac); - } -#endif /* CONFIG_HAS_ETH1 */ - show_startup_phase (11); - - /* Tell everybody that U-Boot is up and runnig */ - i2155x_write_scrapad (0, 0x12345678); - return (0); -} - -static int get_serial_number (char *string, int size) -{ - int i; - char c; - - if (size < I2155X_VPD_SN_SIZE) - size = I2155X_VPD_SN_SIZE; - for (i = 0; i < (size - 1); i++) { - i2155x_read_vpd (I2155X_VPD_SN_START + i, 1, (uchar *)&c); - if (c == '\0') - break; - string[i] = c; - } - string[i] = '\0'; /* make sure it's terminated */ - - return i; -} - -static void get_mac_address(int id, u8 *mac) -{ - i2155x_read_vpd (I2155X_VPD_MAC0_START + 6 * id, 6, mac); -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/pn62/pn62.h b/board/pn62/pn62.h deleted file mode 100644 index 10290c3..0000000 --- a/board/pn62/pn62.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PN62_H_ -#define _PN62_H_ - -/* - * Definitions for the Intel Bridge 21554 or 21555. - */ -#define I2155X_VPD_ADDR 0xe6 -#define I2155X_VPD_DATA 0xe8 - -#define I2155X_VPD_START 0x80 -#define I2155X_VPD_SN_START 0x80 -#define I2155X_VPD_SN_SIZE 0x10 -#define I2155X_VPD_MAC0_START 0x90 -#define I2155X_VPD_MAC1_START 0x96 - -#define I2155X_SCRAPAD_ADDR 0xa8 -#define I2155X_SCRAPAD_MAX 8 - -#define I2155X_BAR2_BASE 0x98 -#define I2155X_BAR3_BASE 0x9c -#define I2155X_BAR4_BASE 0xa0 - -#define I2155X_BAR2_SETUP 0xb0 -#define I2155X_BAR3_SETUP 0xb4 -#define I2155X_BAR4_SETUP 0xb8 - -/* - * Interrupt request numbers - */ -#define PN62_IRQ_HOST 0x0 -#define PN62_IRQ_PLX9054 0x1 -#define PN62_IRQ_ETH0 0x2 -#define PN62_IRQ_ETH1 0x3 -#define PN62_IRQ_COM1 0x4 -#define PN62_IRQ_COM2 0x4 - -/* - * Miscellaneous definitons. - */ -#define PN62_SMEM_DEFAULT 0x1f00000 - -/* - * Definitions for boot protocol using Scratchpad registers. - */ -#define BOOT_DONE 0 -#define BOOT_DONE_CLEAR 0x00dead00 -#define BOOT_DONE_ERROR 0xbad0dead -#define BOOT_DONE_U_BOOT 0x12345678 -#define BOOT_DONE_LINUX 0x87654321 -#define BOOT_CMD 1 -#define BOOT_CMD_MOVE 0x1 -#define BOOT_CMD_BOOT 0x2 -#define BOOT_DATA 2 -#define BOOT_PROTO 3 -#define BOOT_PROTO_READY 0x23456789 -#define BOOT_PROTO_CLEAR 0x00000000 -#define BOOT_STATUS 4 - -/* - * LED Definitions: - */ -#define PN62_LED_BASE 0xff800300 -#define PN62_LED_MAX 12 - -/* - * LED0 - 7 mounted on top of board, D1 - D8 - * LED8 - 11 upper four LEDs on the front panel of the board. - */ -#define LED_0 0x00 /* OFF */ -#define LED_1 0x01 /* ON */ -#define LED_SLOW_CLOCK 0x02 /* SLOW 1Hz ish */ -#define LED_nSLOW_CLOCK 0x03 /* inverse of above */ -#define LED_WATCHDOG_OUT 0x06 /* Reset Watchdog level */ -#define LED_WATCHDOG_CLOCK 0x07 /* clock to watchdog */ - -/* - * LED's currently setup in AMD79C973 device as the following: - * LED0 100Mbit - * LED1 LNKSE - * LED2 TX Activity - * LED3 RX Activity - */ -#define LED_E0_LED0 0x08 /* Ethernet Port 0 LED 0 */ -#define LED_E0_LED1 0x09 /* Ethernet Port 0 LED 1 */ -#define LED_E0_LED2 0x0A /* Ethernet Port 0 LED 2 */ -#define LED_E0_LED3 0x0B /* Ethernet Port 0 LED 3 */ -#define LED_E1_LED0 0x0C /* Ethernet Port 1 LED 0 */ -#define LED_E1_LED1 0x0D /* Ethernet Port 1 LED 1 */ -#define LED_E1_LED2 0x0E /* Ethernet Port 1 LED 2 */ -#define LED_E1_LED3 0x0F /* Ethernet Port 1 LED 3 */ -#define LED_STROBE0 0x10 /* Processor Strobe 0 */ -#define LED_STROBE1 0x11 /* Processor Strobe 1 */ -#define LED_STROBE2 0x12 /* Processor Strobe 2 */ -#define LED_STROBE3 0x13 /* Processor Strobe 3 */ -#define LED_STROBE4 0x14 /* Processor Strobe 4 */ -#define LED_STROBE5 0x15 /* Processor Strobe 5 */ -#define LED_STROBE6 0x16 /* Processor Strobe 6 */ -#define LED_STROBE7 0x17 /* Processor Strobe 7 */ -#define LED_HOST_STROBE0 0x18 /* Host strobe 0 */ -#define LED_HOST_STROBE1 0x19 /* Host strobe 1 */ -#define LED_HOST_STROBE2 0x1A /* Host strobe 2 */ -#define LED_HOST_STROBE3 0x1B /* Host strobe 3 */ -#define LED_HOST_STROBE4 0x1C /* Host strobe 4 */ -#define LED_HOST_STROBE5 0x1D /* Host strobe 5 */ -#define LED_HOST_STROBE6 0x1E /* Host strobe 6 */ -#define LED_HOST_STROBE7 0x1F /* Host strobe 7 */ -#define LED_MPC_INT0 0x20 /* MPC8240 INT 0 */ -#define LED_MPC_INT1 0x21 /* MPC8240 INT 1 */ -#define LED_MPC_INT2 0x22 /* MPC8240 INT 2 */ -#define LED_MPC_INT3 0x23 /* MPC8240 INT 3 */ -#define LED_MPC_INT4 0x24 /* MPC8240 INT 4 */ -#define LED_UART0_CS 0x25 /* UART 0 Chip Select */ -#define LED_UART1_CS 0x26 /* UART 1 Chip Select */ -#define LED_SRAM_CS 0x27 /* SRAM Chip Select */ -#define LED_SRAM_WR 0x28 /* SRAM WR Signal */ -#define LED_SRAM_RD 0x29 /* SRAM RD Signal */ -#define LED_MPC_RCS0 0x2A /* MPC8240 RCS0 Signal */ -#define LED_S_PCI_FRAME 0x2B /* Secondary PCI Frame Signal */ -#define LED_MPC_CS0 0x2C /* MPC8240 CS0 Signal */ -#define LED_HOST_INT 0x2D /* MPC8240 to Host Interrupt signal */ -#define LED_LAST_FUNCTION LED_HOST_INT /* last function */ - -/* - * Forward declarations - */ -int i2155x_init (void); -void i2155x_write_scrapad(int idx, u32 val); -u32 i2155x_read_scrapad (int idx); -void i2155x_set_bar_base (int bar, u32 addr); -int i2155x_read_vpd (int offset, int size, unsigned char *data); - -int am79c95x_init (void); - -void set_led (unsigned int number, unsigned int function); -void fatal_error (unsigned int error_code); -void show_startup_phase (int phase); - - -#endif /* _PN62_H_ */ diff --git a/boards.cfg b/boards.cfg index 375f2d4..1a48ff0 100644 --- a/boards.cfg +++ b/boards.cfg @@ -630,7 +630,6 @@ Active powerpc mpc824x - - hidden_dragon Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson Active powerpc mpc824x - - mvblue MVBLUE - - -Active powerpc mpc824x - - pn62 PN62 - Wolfgang Grandegger Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk Active powerpc mpc824x - - sandpoint Sandpoint8245 - Jim Thompson Active powerpc mpc824x - etin - debris - Sangmoon Kim diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 7cfb3a3..e1d5f62 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,7 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -omap1510inn arm arm925t - - Kshitij Gupta +pn62 powerpc mpc824x - - Wolfgang Grandegger +omap1510inn arm arm925t 0610a16 2013-10-07 Kshitij Gupta CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 Yukon8220 powerpc mpc8220 d6ed322 2013-05-11 diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c index 283cb48..46cef5f 100644 --- a/drivers/net/pcnet.c +++ b/drivers/net/pcnet.c @@ -290,16 +290,6 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis) /* Switch pcnet to 32bit mode */ pcnet_write_bcr (dev, 20, 2); -#ifdef CONFIG_PN62 - /* Setup LED registers */ - val = pcnet_read_bcr (dev, 2) | 0x1000; - pcnet_write_bcr (dev, 2, val); /* enable LEDPE */ - pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */ - pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */ - pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */ - pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */ -#endif - /* Set/reset autoselect bit */ val = pcnet_read_bcr (dev, 2) & ~2; val |= 2; diff --git a/include/configs/PN62.h b/include/configs/PN62.h deleted file mode 100644 index 2a82f94..0000000 --- a/include/configs/PN62.h +++ /dev/null @@ -1,285 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC824X 1 -#define CONFIG_MPC8240 1 -#define CONFIG_PN62 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_BSP - -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_SOURCE - - -#define CONFIG_BAUDRATE 19200 /* console baudrate */ - -#define CONFIG_BOOTDELAY 1 /* autoboot after n seconds */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_SERVERIP 10.0.0.201 -#define CONFIG_IPADDR 10.0.0.200 -#define CONFIG_ROOTPATH "/opt/eldk/ppc_82xx" -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_BOOTARGS -#if 0 -/* Boot Linux with NFS root filesystem */ -#define CONFIG_BOOTCOMMAND \ - "setenv verify y;" \ - "setenv bootargs console=ttyS0,19200 mem=31M quiet " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \ - "loadp 100000; bootm" - /* "tftpboot 100000 uImage; bootm" */ -#else -/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */ -#define CONFIG_BOOTCOMMAND \ - "setenv verify n;" \ - "setenv bootargs console=ttyS0,19200 mem=31M quiet " \ - "root=/dev/ram rw " \ - "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \ - "loadp 200000; bootm" -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */ - -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */ - -#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -/* - * PCI stuff - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* we need Plug 'n Play */ -#if 0 -#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */ -#endif - -/* - * Networking stuff - */ - -#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */ -#define CONFIG_PCNET_79C973 - -#define _IO_BASE 0xfe000000 /* points to PCI I/O space */ - - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - - -#define CONFIG_SYS_NO_FLASH 1 /* There is no FLASH memory */ - -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 0 ... 32 MB in DRAM */ - -/* - * Serial port configuration - */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 1843200 - -#define CONFIG_SYS_NS16550_COM1 0xff800008 -#define CONFIG_SYS_NS16550_COM2 0xff800000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3 - -#define CONFIG_SYS_EUMB_ADDR 0xFCE00000 - -/* MCCR1 */ -#define CONFIG_SYS_ROMNAL 3 /* rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 7 /* rom/flash access time */ - -/* MCCR2 */ -#define CONFIG_SYS_ASRISE 6 /* ASRISE in clocks */ -#define CONFIG_SYS_ASFALL 12 /* ASFALL in clocks */ -#define CONFIG_SYS_REFINT 5600 /* REFINT in clocks */ - -/* MCCR3 */ -#define CONFIG_SYS_BSTOPRE 0x3cf /* Burst To Precharge */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 3 /* data latency from read command */ - -/* MCCR4 */ -#define CONFIG_SYS_PRETOACT 1 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 2 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE Wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -/* Memory bank settings: - * - * only bits 20-29 are actually used from these vales to set the - * start/qend address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x00000000 -#define CONFIG_SYS_BANK1_END 0x00000000 -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x00000000 -#define CONFIG_SYS_BANK2_END 0x00000000 -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x00000000 -#define CONFIG_SYS_BANK3_END 0x00000000 -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -/* - * Memory bank enable bitmask, specifying which of the banks defined above - * are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -/* PCI memory space */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */