[U-Boot,1/1] net: phy/vitesse: Add support for VSC8514 phy module

From: Arpit Goel <B44344@freescale.com>

This patch adds support for VSC8514 PHY module which can be
found on Freescale's T1040RDB boards.

Signed-off-by: Arpit Goel <B44344@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
---
 drivers/net/phy/vitesse.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

Hi Joe, List

> -----Original Message-----
> From: Sharma Bhupesh-B45370
> Sent: Friday, August 23, 2013 8:18 PM
> To: u-boot@lists.denx.de; joe.hershberger@gmail.com
> Cc: Goel Arpit-B44344; Sharma Bhupesh-B45370
> Subject: [PATCH 1/1] net: phy/vitesse: Add support for VSC8514 phy module
> 
> From: Arpit Goel <B44344@freescale.com>
> 
> This patch adds support for VSC8514 PHY module which can be found on
> Freescale's T1040RDB boards.
> 
> Signed-off-by: Arpit Goel <B44344@freescale.com>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
> ---
>  drivers/net/phy/vitesse.c | 69
> ++++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 68 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index
> 5cf103e..c555979 100644
> --- a/drivers/net/phy/vitesse.c
> +++ b/drivers/net/phy/vitesse.c
> @@ -49,6 +49,15 @@
>  #define MIIM_VSC8574_18G_QSGMII		0x80e0
>  #define MIIM_VSC8574_18G_CMDSTAT	0x8000
> 
> +/* Vitesse VSC8514 control register */
> +#define MIIM_VSC8514_GENERAL18		0x12
> +#define MIIM_VSC8514_GENERAL19		0x13
> +#define MIIM_VSC8514_GENERAL23		0x17
> +
> +/* Vitesse VSC8514 gerenal purpose register 18 */
> +#define MIIM_VSC8514_18G_QSGMII		0x80e0
> +#define MIIM_VSC8514_18G_CMDSTAT	0x8000
> +
>  /* CIS8201 */
>  static int vitesse_config(struct phy_device *phydev)  { @@ -148,7 +157,7
> @@ static int vsc8601_config(struct phy_device *phydev)  static int
> vsc8574_config(struct phy_device *phydev)  {
>  	u32 val;
> -	/* configure regiser 19G for MAC */
> +	/* configure register 19G for MAC */
>  	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
>  		  PHY_EXT_PAGE_ACCESS_GENERAL);
> 
> @@ -188,6 +197,53 @@ static int vsc8574_config(struct phy_device *phydev)
>  	return 0;
>  }
> 
> +static int vsc8514_config(struct phy_device *phydev) {
> +	u32 val;
> +	int timeout = 1000000;
> +
> +	/* configure register to access 19G */
> +	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
> +		  PHY_EXT_PAGE_ACCESS_GENERAL);
> +
> +	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
> +	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
> +		/* set bit 15:14 to '01' for QSGMII mode */
> +		val = (val & 0x3fff) | (1 << 14);
> +		phy_write(phydev, MDIO_DEVAD_NONE,
> +			  MIIM_VSC8514_GENERAL19, val);
> +		/* Enable 4 ports MAC QSGMII */
> +		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
> +			  MIIM_VSC8514_18G_QSGMII);
> +	} else {
> +		/*TODO Add SGMII functionality once spec sheet
> +		 * for VSC8514 defines complete functionality
> +		 */
> +	}
> +
> +	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
> +	/* When bit 15 is cleared the command has completed */
> +	while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
> +		val = phy_read(phydev, MDIO_DEVAD_NONE,
> MIIM_VSC8514_GENERAL18);
> +
> +	if (0 == timeout) {
> +		printf("PHY 8514 config failed\n");
> +		return -1;
> +	}
> +
> +	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
> +
> +	/* configure register to access 23 */
> +	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
> +	/* set bits 10:8 to '000' */
> +	val = (val & 0xf8ff);
> +	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
> +
> +	genphy_config_aneg(phydev);
> +
> +	return 0;
> +}
> +
>  static struct phy_driver VSC8211_driver = {
>  	.name	= "Vitesse VSC8211",
>  	.uid	= 0xfc4b0,
> @@ -238,6 +294,16 @@ static struct phy_driver VSC8574_driver = {
>  	.shutdown = &genphy_shutdown,
>  };
> 
> +static struct phy_driver VSC8514_driver = {
> +	.name = "Vitesse VSC8514",
> +	.uid = 0x70570,
> +	.mask = 0xffff0,
> +	.features = PHY_GBIT_FEATURES,
> +	.config = &vsc8514_config,
> +	.startup = &vitesse_startup,
> +	.shutdown = &genphy_shutdown,
> +};
> +
>  static struct phy_driver VSC8601_driver = {
>  	.name = "Vitesse VSC8601",
>  	.uid = 0x70420,
> @@ -298,6 +364,7 @@ int phy_vitesse_init(void)
>  	phy_register(&VSC8211_driver);
>  	phy_register(&VSC8221_driver);
>  	phy_register(&VSC8574_driver);
> +	phy_register(&VSC8514_driver);
>  	phy_register(&VSC8662_driver);
>  	phy_register(&cis8201_driver);
>  	phy_register(&cis8204_driver);
> --
> 1.7.11.7
> 

Any comments on this patch?
Does it seem fine and can be taken up in Joe's 'net' repo?

Thanks,
Bhupesh