From patchwork Tue Jun 19 07:30:30 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajeshwari Birje X-Patchwork-Id: 165684 X-Patchwork-Delegate: hs@denx.de Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 3FED2B7011 for ; Tue, 19 Jun 2012 17:27:09 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 8B2432811B; Tue, 19 Jun 2012 09:26:51 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id xd0ph9UoTv1r; Tue, 19 Jun 2012 09:26:50 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id BD802280F8; Tue, 19 Jun 2012 09:26:36 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 78A30280D1 for ; Tue, 19 Jun 2012 09:26:34 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id PGpNgODUNF-A for ; Tue, 19 Jun 2012 09:26:33 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mailout3.samsung.com (mailout3.samsung.com [203.254.224.33]) by theia.denx.de (Postfix) with ESMTP id B6C8F280DC for ; Tue, 19 Jun 2012 09:26:13 +0200 (CEST) Received: from epcpsbgm1.samsung.com (mailout3.samsung.com [203.254.224.33]) by mailout3.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0M5U00B2ZSMRA380@mailout3.samsung.com> for u-boot@lists.denx.de; Tue, 19 Jun 2012 16:26:11 +0900 (KST) X-AuditID: cbfee61a-b7f9f6d0000016a8-57-4fe0299374a8 Received: from epmmp1.local.host ( [203.254.227.16]) by epcpsbgm1.samsung.com (EPCPMTA) with SMTP id 3E.D2.05800.39920EF4; Tue, 19 Jun 2012 16:26:11 +0900 (KST) Received: from rajeshwari-linux.sisodomain.com ([107.108.215.115]) by mmp1.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0M5U00EHGSMYFC70@mmp1.samsung.com> for u-boot@lists.denx.de; Tue, 19 Jun 2012 16:26:11 +0900 (KST) From: Rajeshwari Shinde To: u-boot@lists.denx.de Date: Tue, 19 Jun 2012 13:00:30 +0530 Message-id: <1340091032-26560-7-git-send-email-rajeshwari.s@samsung.com> X-Mailer: git-send-email 1.7.4.4 In-reply-to: <1340091032-26560-1-git-send-email-rajeshwari.s@samsung.com> References: <1340091032-26560-1-git-send-email-rajeshwari.s@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrMJMWRmVeSWpSXmKPExsVy+t9jAd3Jmg/8DXo+8lm83dvJ7sDocfbO DsYAxigum5TUnMyy1CJ9uwSujJ6Zl5kK3uVV3Nhwm7mBsSm0i5GTQ0LAROL34YksELaYxIV7 69m6GLk4hAQWMUr0d71hhnBWMUl8/LaGGaSKTcBIYuvJaYwgtoiAhMSv/qtgNrPAFEaJXavB pgoL2El8+T+bDcRmEVCVmLmrCWwDr4CHxLc/t5khtilIHJv6lRXE5hTwlJi0fz4TiC0EVHP/ yzmmCYy8CxgZVjGKphYkFxQnpeca6hUn5haX5qXrJefnbmIEe/2Z1A7GlQ0WhxgFOBiVeHgP yj3wF2JNLCuuzD3EKMHBrCTCu+r/fX8h3pTEyqrUovz4otKc1OJDjNIcLErivE3WF/yFBNIT S1KzU1MLUotgskwcnFINjBUXyyek7vaREhS9u1U6OiuYy/rpxuJ8waqL2q6P/ndE9utnyCTt flchdMTtVlTAKl+zDIOOfcuU7j+aa+R1R3xq4tuIFTOEHW5fXi2Q+/bT5n/h2qc7vvFmyZ2a cj6nNv2CY9uZijou65yds9gkpfrZOdQ2vnzz4JPdu39RXQI7+4zEFqnyK7EUZyQaajEXFScC AHP0oPf2AQAA X-TM-AS-MML: No Cc: patches@linaro.org, alim.akhtar@samsung.com, hs@denx.de Subject: [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de This patch modifies the S3C I2C driver to suppport EXYNOS5. The cahnges made to driver are as follows: - I2C base address is passed as a parameter to many functions to avoid multiple #ifdef - I2C init for Exynos5 is made as different function. - Channel initialisation is moved to a commom funation as it is required by both the i2c_init. - Separate functions written to get I2C base address, peripheral id for pinmux support. - Hardcoding for I2CCON_ACKGEN removed. - Replaced printf with debug. - Checkpatch issues resolved. Signed-off-by: Alim Akhtar Signed-off-by: Doug Anderson Signed-off-by: Rajeshwari Shinde Acked-by: Simon Glass --- Changes in V2: - Removed #define for I2C cahnnels from hearder file except for I2C0. - Incorporated review comments from Simon Glass. Changes in V3: - Incorporated review comments from Joonyoung Shim. - Reduced the number of #ifdef by modifying get_i2c_base function. - Removed duplicate code. Changes in V4: - Resolved build error for s3c2410. drivers/i2c/s3c24x0_i2c.c | 239 +++++++++++++++++++++++++++++++-------------- drivers/i2c/s3c24x0_i2c.h | 3 + 2 files changed, 168 insertions(+), 74 deletions(-) diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index ba6f39b..0b31cd1 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,10 +27,17 @@ */ #include +#ifdef CONFIG_EXYNOS5 +#include +#include +#include +#include +#else #include - +#endif #include #include +#include "s3c24x0_i2c.h" #ifdef CONFIG_HARD_I2C @@ -45,6 +52,7 @@ #define I2CSTAT_BSY 0x20 /* Busy bit */ #define I2CSTAT_NACK 0x01 /* Nack bit */ +#define I2CCON_ACKGEN 0x80 /* Acknowledge generation */ #define I2CCON_IRPND 0x10 /* Interrupt pending bit */ #define I2C_MODE_MT 0xC0 /* Master Transmit Mode */ #define I2C_MODE_MR 0x80 /* Master Receive Mode */ @@ -53,6 +61,32 @@ #define I2C_TIMEOUT 1 /* 1 second */ +static unsigned int g_current_bus; /* Stores Current I2C Bus */ + +#ifdef CONFIG_EXYNOS5 +/* We should not rely on any particular ordering of these IDs */ +static enum periph_id periph_for_dev[] = { + PERIPH_ID_I2C0, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, +}; + +static enum periph_id i2c_get_periph_id(unsigned dev_index) +{ + if (dev_index < ARRAY_SIZE(periph_for_dev)) + return periph_for_dev[dev_index]; + + debug("%s: invalid bus %d", __func__, dev_index); + + return PERIPH_ID_NONE; +} + +#else static int GetI2CSDA(void) { struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); @@ -77,16 +111,17 @@ static void SetI2CSCL(int x) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - writel((readl(&gpio->gpedat) & ~0x4000) | (x & 1) << 14, &gpio->gpedat); + writel((readl(&gpio->gpedat) & ~0x4000) | + (x & 1) << 14, &gpio->gpedat); #endif #ifdef CONFIG_S3C2400 writel((readl(&gpio->pgdat) & ~0x0040) | (x & 1) << 6, &gpio->pgdat); #endif } +#endif -static int WaitForXfer(void) +static int WaitForXfer(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); int i; i = I2C_TIMEOUT * 10000; @@ -98,27 +133,93 @@ static int WaitForXfer(void) return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } -static int IsACK(void) +static int IsACK(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - return !(readl(&i2c->iicstat) & I2CSTAT_NACK); } -static void ReadWriteByte(void) +static void ReadWriteByte(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } +static struct s3c24x0_i2c *get_base_i2c(int bus_idx) +{ +#ifdef CONFIG_EXYNOS5 + struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)samsung_get_base_i2c(); + return &i2c[bus_idx]; +#else + return s3c24x0_get_base_i2c(); +#endif +} + +static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) +{ + ulong freq, pres = 16, div; +#ifdef CONFIG_EXYNOS5 + freq = get_i2c_clk(); +#else + freq = get_PCLK(); +#endif + /* calculate prescaler and divisor values */ + if ((freq / pres / (16 + 1)) > speed) + /* set prescaler to 512 */ + pres = 512; + + div = 0; + while ((freq / pres / (div + 1)) > speed) + div++; + + /* set prescaler, divisor according to freq, also set ACKGEN, IRQ */ + writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); + + /* init to SLAVE REVEIVE and set slaveaddr */ + writel(0, &i2c->iicstat); + writel(slaveadd, &i2c->iicadd); + /* program Master Transmit (and implicit STOP) */ + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); +} + +static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus) +{ + int periph_id = i2c_get_periph_id(bus); + + exynos_pinmux_config(periph_id, 0); + + i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +} + +#ifdef CONFIG_EXYNOS5 void i2c_init(int speed, int slaveadd) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); + struct s3c24x0_i2c *i2c; + int i; + + /* By default i2c channel 0 is the current bus */ + g_current_bus = I2C0; + + i2c = get_base_i2c(g_current_bus); + + i2c_bus_init(i2c, g_current_bus); + + /* wait for some time to give previous transfer a chance to finish */ + i = I2C_TIMEOUT * 1000; + while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) { + udelay(1000); + i--; + } +} + +#else +void i2c_init(int speed, int slaveadd) +{ + struct s3c24x0_i2c *i2c = get_base_i2c(); struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); - ulong freq, pres = 16, div; int i; + /* By default i2c channel 0 is the current bus */ + g_current_bus = I2C0; + /* wait for some time to give previous transfer a chance to finish */ i = I2C_TIMEOUT * 1000; @@ -171,27 +272,9 @@ void i2c_init(int speed, int slaveadd) #endif } - /* calculate prescaler and divisor values */ - freq = get_PCLK(); - if ((freq / pres / (16 + 1)) > speed) - /* set prescaler to 512 */ - pres = 512; - - div = 0; - while ((freq / pres / (div + 1)) > speed) - div++; - - /* set prescaler, divisor according to freq, also set - * ACKGEN, IRQ */ - writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); - - /* init to SLAVE REVEIVE and set slaveaddr */ - writel(0, &i2c->iicstat); - writel(slaveadd, &i2c->iicadd); - /* program Master Transmit (and implicit STOP) */ - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); - + i2c_ch_init(i2c, speed, slaveadd); } +#endif /* * cmd_type is 0 for write, 1 for read. @@ -200,19 +283,19 @@ void i2c_init(int speed, int slaveadd) * by the char, we could make it larger if needed. If it is * 0 we skip the address write cycle. */ -static -int i2c_transfer(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], unsigned short data_len) +static int i2c_transfer(struct s3c24x0_i2c *i2c, + unsigned char cmd_type, + unsigned char chip, + unsigned char addr[], + unsigned char addr_len, + unsigned char data[], + unsigned short data_len) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); int i, result; if (data == 0 || data_len == 0) { /*Don't support data transfer of no length or to address 0 */ - printf("i2c_transfer: bad call\n"); + debug("i2c_transfer: bad call\n"); return I2C_NOK; } @@ -226,7 +309,7 @@ int i2c_transfer(unsigned char cmd_type, if (readl(&i2c->iicstat) & I2CSTAT_BSY) return I2C_NOK_TOUT; - writel(readl(&i2c->iiccon) | 0x80, &i2c->iiccon); + writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon); result = I2C_OK; switch (cmd_type) { @@ -238,16 +321,16 @@ int i2c_transfer(unsigned char cmd_type, &i2c->iicstat); i = 0; while ((i < addr_len) && (result == I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(addr[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } i = 0; while ((i < data_len) && (result == I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(data[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } } else { @@ -257,19 +340,19 @@ int i2c_transfer(unsigned char cmd_type, &i2c->iicstat); i = 0; while ((i < data_len) && (result = I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(data[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } } if (result == I2C_OK) - result = WaitForXfer(); + result = WaitForXfer(i2c); /* send STOP */ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); - ReadWriteByte(); + ReadWriteByte(i2c); break; case I2C_READ: @@ -279,13 +362,13 @@ int i2c_transfer(unsigned char cmd_type, /* send START */ writel(readl(&i2c->iicstat) | I2C_START_STOP, &i2c->iicstat); - result = WaitForXfer(); - if (IsACK()) { + result = WaitForXfer(i2c); + if (IsACK(i2c)) { i = 0; while ((i < addr_len) && (result == I2C_OK)) { writel(addr[i], &i2c->iicds); - ReadWriteByte(); - result = WaitForXfer(); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); i++; } @@ -293,16 +376,17 @@ int i2c_transfer(unsigned char cmd_type, /* resend START */ writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP, &i2c->iicstat); - ReadWriteByte(); - result = WaitForXfer(); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) writel(readl(&i2c->iiccon) - & ~0x80, &i2c->iiccon); - ReadWriteByte(); - result = WaitForXfer(); + & ~I2CCON_ACKGEN, + &i2c->iiccon); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); data[i] = readl(&i2c->iicds); i++; } @@ -316,17 +400,18 @@ int i2c_transfer(unsigned char cmd_type, /* send START */ writel(readl(&i2c->iicstat) | I2C_START_STOP, &i2c->iicstat); - result = WaitForXfer(); + result = WaitForXfer(i2c); - if (IsACK()) { + if (IsACK(i2c)) { i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) writel(readl(&i2c->iiccon) & - ~0x80, &i2c->iiccon); - ReadWriteByte(); - result = WaitForXfer(); + ~I2CCON_ACKGEN, + &i2c->iiccon); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); data[i] = readl(&i2c->iicds); i++; } @@ -337,22 +422,24 @@ int i2c_transfer(unsigned char cmd_type, /* send STOP */ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); - ReadWriteByte(); + ReadWriteByte(i2c); break; default: - printf("i2c_transfer: bad call\n"); + debug("i2c_transfer: bad call\n"); result = I2C_NOK; break; } - return (result); + return result; } int i2c_probe(uchar chip) { + struct s3c24x0_i2c *i2c; uchar buf[1]; + i2c = get_base_i2c(g_current_bus); buf[0] = 0; /* @@ -360,16 +447,17 @@ int i2c_probe(uchar chip) * address was ed (i.e. there was a chip at that address which * drove the data line low). */ - return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK; + return i2c_transfer(i2c, I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK; } int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { + struct s3c24x0_i2c *i2c; uchar xaddr[4]; int ret; if (alen > 4) { - printf("I2C read: addr len %d not supported\n", alen); + debug("I2C read: addr len %d not supported\n", alen); return 1; } @@ -396,10 +484,11 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - if ((ret = - i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen, - buffer, len)) != 0) { - printf("I2c read: failed %d\n", ret); + i2c = get_base_i2c(g_current_bus); + ret = i2c_transfer(i2c, I2C_READ, chip << 1, &xaddr[4 - alen], alen, + buffer, len); + if (ret != 0) { + debug("I2c read: failed %d\n", ret); return 1; } return 0; @@ -407,10 +496,11 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { + struct s3c24x0_i2c *i2c; uchar xaddr[4]; if (alen > 4) { - printf("I2C write: addr len %d not supported\n", alen); + debug("I2C write: addr len %d not supported\n", alen); return 1; } @@ -436,8 +526,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif + i2c = get_base_i2c(g_current_bus); return (i2c_transfer - (I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, + (i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, len) != 0); } #endif /* CONFIG_HARD_I2C */ diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h index d357a0a..57aafb1 100644 --- a/drivers/i2c/s3c24x0_i2c.h +++ b/drivers/i2c/s3c24x0_i2c.h @@ -23,6 +23,9 @@ #ifndef _S3C24X0_I2C_H #define _S3C24X0_I2C_H +/* I2C channels exynos5 has 8 i2c channel */ +#define I2C0 0 + struct s3c24x0_i2c { u32 iiccon; u32 iicstat;