| Message ID | 1316714842-18271-4-git-send-email-fabio.estevam@freescale.com |
|---|---|
| State | Accepted |
| Commit | 7a5faf089b455a99f9dd79f734d21d02a1b159a4 |
| Delegated to: | Stefano Babic |
| Headers | show |
On 09/22/2011 08:07 PM, Fabio Estevam wrote: > As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > board/logicpd/imx31_litekit/imx31_litekit.c | 6 ------ > include/configs/imx31_litekit.h | 2 +- > 2 files changed, 1 insertions(+), 7 deletions(-) > > diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c > index 09cc9c5..0402a0b 100644 > --- a/board/logicpd/imx31_litekit/imx31_litekit.c > +++ b/board/logicpd/imx31_litekit/imx31_litekit.c > @@ -37,12 +37,6 @@ int dram_init(void) > return 0; > } > > -void dram_init_banksize(void) > -{ > - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > -} > - > int board_early_init_f(void) > { > __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ > diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h > index b7f1cb3..2a02b3d 100644 > --- a/include/configs/imx31_litekit.h > +++ b/include/configs/imx31_litekit.h > @@ -150,7 +150,7 @@ > #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) > #define CONFIG_BOARD_EARLY_INIT_F > > -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR > #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE > #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) Applied to u-boot-imx, next branch, thanks. Best regards, Stefano Babic
diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index 09cc9c5..0402a0b 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -37,12 +37,6 @@ int dram_init(void) return 0; } -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - int board_early_init_f(void) { __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index b7f1cb3..2a02b3d 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -150,7 +150,7 @@ #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- board/logicpd/imx31_litekit/imx31_litekit.c | 6 ------ include/configs/imx31_litekit.h | 2 +- 2 files changed, 1 insertions(+), 7 deletions(-)