diff --git a/MAKEALL b/MAKEALL
index 8eaa0d5..ce987e8 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -326,7 +326,6 @@ LIST_ARM9="			\
 	magnesium		\
 	mv88f6281gtw_ge		\
 	mx1ads			\
-	netstar			\
 	nhk8815			\
 	nhk8815_onenand		\
 	omap1510inn		\
diff --git a/Makefile b/Makefile
index 6cafb99..699a752 100644
--- a/Makefile
+++ b/Makefile
@@ -932,7 +932,6 @@ clean:
 	       $(obj)tools/ncb		   $(obj)tools/ubsha1
 	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
-	       $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}	  \
 	       $(obj)board/voiceblue/eeprom 				  \
 	       $(obj)u-boot.lds						  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
deleted file mode 100644
index 7230a2f..0000000
--- a/board/netstar/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= netstar.o
-SOBJS	:= setup.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all:	$(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
-		$(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
-	echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom:		$(obj)eeprom_start.o $(obj)eeprom.o
-	$(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
-		-L$(obj)../../examples/standalone -lstubs \
-		$(PLATFORM_LIBS)
-
-$(obj)eeprom.srec:	$(obj)eeprom
-	$(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin:	$(obj)eeprom
-	$(OBJCOPY) -S -O binary $< $@
-
-$(obj)crcek.srec:	$(obj)crcek.o
-	$(LD) -g -Ttext 0x00000000 -e crcek -o $(<:.o=) $^
-	$(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)crcek.bin:	$(obj)crcek.srec
-	$(OBJCOPY) -I srec -O binary $< $@
-
-$(obj)crcit:		$(obj)crcit.o $(obj)crc32.o
-	$(HOSTCC) $(HOSTCFLAGS) -o $@ $^
-
-$(obj)crcit.o:		crcit.c
-	$(HOSTCC) $(HOSTCFLAGS) -o $@ -c $<
-
-$(obj)crc32.o:		$(SRCTREE)/lib/crc32.c
-	$(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -I$(TOPDIR)/include \
-		-o $@ -c $<
-
-clean:
-	rm -f $(SOBJS) $(OBJS) \
-		$(obj)eeprom_start.o $(obj)eeprom.o \
-		$(obj)eeprom $(obj)eeprom.srec 	$(obj)eeprom.bin \
-		$(obj)crcek.o $(obj)crcek $(obj)crcek.srec $(obj)crcek.bin
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/netstar/config.mk b/board/netstar/config.mk
deleted file mode 100644
index 9e1446e..0000000
--- a/board/netstar/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-# We load ourself to internal RAM at 2001'2000
-# Check map file when changing CONFIG_SYS_TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-#
-
-# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
-CONFIG_SYS_TEXT_BASE = 0x13FC0000
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
deleted file mode 100644
index af35662..0000000
--- a/board/netstar/crcek.S
+++ /dev/null
@@ -1,241 +0,0 @@
-/**
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2.
- *
- * Image layout looks like following:
- *	u32 - size
- *	u32 - version
- *	... - data
- *	u32 - crc32
- */
-
-#include <config.h>
-#include "crcek.h"
-
-/**
- * do_crc32 - calculate CRC32 of given buffer
- * r0 - crc
- * r1 - pointer to buffer
- * r2 - buffer len
- */
-	.macro	do_crc32
-	ldr	r5, FFFFFFFF
-	eor	r0, r0, r5
-	adr	r3, CRC32_TABLE
-1:
-	ldrb    r4, [r1], #1
-	eor	r4, r4, r0
-	and	r4, r4, #0xff
-	ldr	r4, [r3, r4, lsl#2]
-	eor	r0, r4, r0, lsr#8
-	subs	r2, r2, #0x1
-	bne	1b
-	eor	r0, r0, r5
-	.endm
-
-	.macro crcuj, offset, size
-	mov	r0, #0
-	ldr	r1, \offset
-	ldr	r2, [r1], #4
-	cmp	r2, r0		@ no data, no problem
-	beq	2f
-	tst	r2, #3		@ unaligned size
-	bne	2f
-	ldr	r3, \size
-	cmp	r2, r3		@ bogus size
-	bhi	2f
-	do_crc32
-	ldr	r1, [r1]
-2:
-	cmp	r0, r1
-	.endm
-
-	.macro wait, reg
-	mov	\reg, #0x100000
-3:
-	subs	\reg, \reg, #0x1
-	bne	3b
-	.endm
-
-.text
-.globl crcek
-crcek:
-	/* Enable I-cache */
-	mrc	p15, 0, r1, c0, c0, 0		@ read C15 ID register
-	mrc	p15, 0, r1, c0, c0, 1		@ read C15 Cache information register
-	mrc	p15, 0, r1, c1, c0, 0		@ read C15 Control register
-	orr	r1, r1, #0x1000			@ enable I-cache, map interrupt vector 0xffff0000
-	mcr	p15, 0, r1, c1, c0, 0		@ write C15 Control register
-	mov	r1, #0x00
-	mcr	p15, 0, r1, c7, c5, 0		@ Flush I-cache
-	nop
-	nop
-	nop
-	nop
-
-	/* Setup clocking mode */
-	ldr	r0, MPU_CLKM_BASE		@ base of CLOCK unit
-	ldrh	r1, [r0, #0x18]			@ ARM_SYST - get reset status
-	bic	r1, r1, #(7 << 11)		@ clear clock select
-	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
-	mov	r2, #0
-loop:
-	cmp	r2, #1				@ this loop will wait for at least 100 cycles
-	streqh	r1, [r0, #0x18]			@ before issuing next request from MPU
-	add	r2, r2, #1			@ on the 1st run code is loaded into I-cache
-	cmp	r2, #16				@ and second run will set clocking mode
-	bne	loop
-	nop
-
-	/* Setup clock dividers */
-	ldr	r1, CKCTL_VAL
-	orr	r1, r1, #0x2000			@ enable DSP clock
-	strh	r1, [r0]			@ setup clock divisors
-
-	/* Setup DPLL to generate requested freq */
-	ldr	r0, DPLL1_BASE			@ base of DPLL1 register
-	mov	r1, #0x0010			@ set PLL_ENABLE
-	orr	r1, r1, #0x2000			@ set IOB to new locking
-	orr	r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
-	orr	r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
-	strh	r1, [r0]			@ write
-
-locking:
-	ldrh	r1, [r0]			@ get DPLL value
-	tst	r1, #0x01
-	beq	locking				@ while LOCK not set
-
-	/* Enable clock */
-	ldr	r0, MPU_CLKM_BASE		@ base of CLOCK unit
-	mov	r1, #(1 << 10)			@ disable idle mode do not check
-						@ nWAKEUP pin, other remain active
-	strh	r1, [r0, #0x04]
-	ldr	r1, EN_CLK_VAL
-	strh	r1, [r0, #0x08]
-	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
-	strh	r1, [r0, #0x0c]			@ max delayed ( 32 x CLKIN )
-
-
-	mov	r6, #0
-	crcuj	_LOADER1_OFFSET, _LOADER_SIZE
-	bne	crc1_bad
-	orr	r6, r6, #1
-crc1_bad:
-	crcuj	_LOADER2_OFFSET, _LOADER_SIZE
-	bne	crc2_bad
-	orr	r6, r6, #2
-crc2_bad:
-	ldr	r3, _LOADER1_OFFSET
-	ldr	r4, _LOADER2_OFFSET
-	teq	r6, #3
-	bne	one_is_bad	@ one of them (or both) has bad crc
-	ldr	r1, [r3, #4]
-	ldr	r2, [r4, #4]
-	cmp	r1, r2		@ boot 2nd loader if versions differ
-	beq	boot_1st
-	b	boot_2nd
-one_is_bad:
-	tst	r6, #1
-	bne	boot_1st
-	tst	r6, #2
-	bne	boot_2nd
-@ We are doomed, so let user know.
-hell:
-	ldr	r0, GPIO_BASE	@ configure GPIO pins
-	ldr	r1, GPIO_DIRECTION
-	strh	r1, [r0, #0x08]
-blink_loop:
-	mov	r1, #0x08
-	strh    r1, [r0, #0x04]
-	wait	r3
-	mov	r1, #0x10
-	strh    r1, [r0, #0x04]
-	wait	r3
-	b blink_loop
-boot_1st:
-	add	pc, r3, #8
-boot_2nd:
-	add	pc, r4, #8
-
-_LOADER_SIZE:
-	.word LOADER_SIZE - 8	@ minus size and crc32
-_LOADER1_OFFSET:
-	.word LOADER1_OFFSET
-_LOADER2_OFFSET:
-	.word LOADER2_OFFSET
-
-FFFFFFFF:
-	.word 0xffffffff
-CRC32_TABLE:
-	.word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
-	.word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
-	.word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
-	.word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
-	.word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
-	.word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
-	.word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
-	.word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
-	.word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
-	.word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
-	.word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
-	.word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
-	.word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
-	.word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
-	.word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
-	.word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
-	.word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
-	.word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
-	.word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
-	.word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
-	.word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
-	.word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
-	.word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
-	.word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
-	.word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
-	.word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
-	.word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
-	.word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
-	.word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
-	.word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
-	.word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
-	.word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
-	.word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
-	.word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
-	.word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
-	.word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
-	.word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
-	.word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
-	.word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
-	.word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
-	.word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
-	.word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
-	.word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
-	.word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
-	.word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
-	.word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
-	.word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
-	.word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
-	.word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
-	.word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
-	.word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
-	.word 0x2d02ef8d
-
-GPIO_BASE:
-	.word 0xfffce000
-MPU_CLKM_BASE:
-	.word 0xfffece00
-DPLL1_BASE:
-	.word 0xfffecf00
-
-CKCTL_VAL:
-	.word OMAP5910_ARM_CKCTL
-EN_CLK_VAL:
-	.word OMAP5910_ARM_EN_CLK
-GPIO_DIRECTION:
-	.word 0x0000ffe7
-
-.end
diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h
deleted file mode 100644
index 30c0860..0000000
--- a/board/netstar/crcek.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#define LOADER_SIZE	(448 * 1024)
-#define LOADER1_OFFSET	(128 * 1024)
-#define LOADER2_OFFSET	(LOADER1_OFFSET + LOADER_SIZE)
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
deleted file mode 100644
index a162649..0000000
--- a/board/netstar/crcit.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "crcek.h"
-
-extern uint32_t crc32(uint32_t, const unsigned char *, uint);
-
-static uint32_t data[LOADER_SIZE/4 + 3];
-
-static int do_crc(char *path, unsigned version)
-{
-	uint32_t *p;
-	ssize_t size;
-	int fd;
-
-	fd = open(path, O_RDONLY);
-	if (fd == -1) {
-		perror("Error opening file");
-		return EXIT_FAILURE;
-	}
-	p = data + 2;
-	size = read(fd, p, LOADER_SIZE + 4);
-	if (size == -1) {
-		perror("Error reading file");
-		return EXIT_FAILURE;
-	}
-	if (size > LOADER_SIZE) {
-		fprintf(stderr, "File too large\n");
-		return EXIT_FAILURE;
-	}
-	size  = (size + 3) & ~3;	/* round up to 4 bytes */
-	size += 4;			/* add size of version field */
-	data[0] = size;
-	data[1] = version;
-	data[size/4 + 1] = crc32(0, (unsigned char *)(data + 1), size);
-	close(fd);
-
-	if (write(STDOUT_FILENO, data, size + 4 /*size*/ + 4 /*crc*/) == -1) {
-		perror("Error writing file");
-		return EXIT_FAILURE;
-	}
-
-	return EXIT_SUCCESS;
-}
-
-int main(int argc, char * const *argv)
-{
-	if (argc == 2) {
-		return do_crc(argv[1], 0);
-	} else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
-		char *endptr, *nptr = argv[2];
-		unsigned ver = strtoul(nptr, &endptr, 0);
-		if (*nptr != '\0' && *endptr == '\0')
-			return do_crc(argv[3], ver);
-	}
-	fprintf(stderr, "Usage: crcit [-v version] <image>\n");
-
-	return EXIT_FAILURE;
-}
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
deleted file mode 100644
index aa375a4..0000000
--- a/board/netstar/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
-	.iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK(&dev, 2);
-	SMC_outw(&dev, reg, PTR_REG);
-
-	SMC_SELECT_BANK(&dev, 1);
-	SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
-		CTL_RELOAD, CTL_REG);
-
-	timeout = 100;
-
-	while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
-		udelay(100);
-	if (timeout == 0) {
-		printf("Timeout reading register %02x\n", reg);
-		return 0;
-	}
-
-	return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK(&dev, 2);
-	SMC_outw(&dev, reg, PTR_REG);
-
-	SMC_SELECT_BANK(&dev, 1);
-
-	SMC_outw(&dev, value, GP_REG);
-	SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
-		CTL_STORE, CTL_REG);
-
-	timeout = 100;
-
-	while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
-		udelay(100);
-	if (timeout == 0) {
-		printf("Timeout writing register %02x\n", reg);
-		return 0;
-	}
-
-	return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
-	u16 reg = 0x23;
-
-	while (len--)
-		write_eeprom_reg(*buf++, reg++);
-
-	return 0;
-}
-
-static int verify_macaddr(char *s)
-{
-	u16 reg;
-	int i, err = 0;
-
-	puts("HWaddr: ");
-	for (i = 0; i < 3; i++) {
-		reg = read_eeprom_reg(0x20 + i);
-		printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
-		if (s)
-			err |= reg != ((u16 *)s)[i];
-	}
-
-	return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
-	int i;
-	char *e, eaddr[6];
-
-	/* turn string into mac value */
-	for (i = 0; i < 6; i++) {
-		eaddr[i] = simple_strtoul(s, &e, 16);
-		s = (*e) ? e+1 : e;
-	}
-
-	for (i = 0; i < 3; i++)
-		write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
-	return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
-	int cnt;
-	char *p, num[3];
-	unsigned char id;
-
-	id = simple_strtoul(s, &p, 16);
-	if (*p++ != ':')
-		return -1;
-	cnt = 2;
-	num[2] = 0;
-	for (; *p; p += 2) {
-		if (p[1] == 0)
-			return -2;
-		if (cnt + 3 > len)
-			return -3;
-		num[0] = p[0];
-		num[1] = p[1];
-		buf[cnt++] = simple_strtoul(num, NULL, 16);
-	}
-	buf[0] = id;
-	buf[1] = cnt - 2;
-
-	return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
-	int i, len, ret;
-	unsigned char buf[58], *p;
-
-	app_startup(argv);
-	i = get_version();
-	if (i != XF_VERSION) {
-		printf("Using ABI version %d, but U-Boot provides %d\n",
-			XF_VERSION, i);
-		return 1;
-	}
-
-	if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
-		puts("SMSC91111 not found\n");
-		return 2;
-	}
-
-	/* Called without parameters - print MAC address */
-	if (argc < 2) {
-		verify_macaddr(NULL);
-		return 0;
-	}
-
-	/* Print help message */
-	if (argv[1][1] == 'h') {
-		puts("NetStar EEPROM writer\n"
-			"Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n"
-			"Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
-		return 0;
-	}
-
-	/* Try to parse information elements */
-	len = sizeof(buf);
-	p = buf;
-	for (i = 2; i < argc; i++) {
-		ret = parse_element(argv[i], p, len);
-		switch (ret) {
-		case -1:
-			printf("Element %d: malformed\n", i - 1);
-			return 3;
-		case -2:
-			printf("Element %d: odd character count\n", i - 1);
-			return 3;
-		case -3:
-			puts("Out of EEPROM memory\n");
-			return 3;
-		default:
-			p += ret;
-			len -= ret;
-		}
-	}
-
-	/* First argument (MAC) is mandatory */
-	set_mac(argv[1]);
-	if (verify_macaddr(argv[1])) {
-		puts("*** HWaddr does not match! ***\n");
-		return 4;
-	}
-
-	while (len--)
-		*p++ = 0;
-
-	write_data((u16 *)buf, sizeof(buf) >> 1);
-
-	return 0;
-}
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
deleted file mode 100644
index df1704b..0000000
--- a/board/netstar/netstar.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <flash.h>
-#include <nand.h>
-
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* arch number of NetStar board */
-	gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	/* Take the Ethernet controller out of reset and wait
-	 * for the EEPROM load to complete. */
-	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
-	udelay(10);	/* doesn't work before timer_init call */
-	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
-	udelay(500);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_RTC_DS1307)
-	/* enable trickle charge */
-	i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
-#endif
-	return 0;
-}
-
-int board_late_init(void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_CMD_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
-{
-	if (banknum == 0) {	/* AM29LV800 boot flash */
-		info->portwidth = FLASH_CFI_16BIT;
-		info->chipwidth = FLASH_CFI_BY16;
-		info->interface = FLASH_CFI_X16;
-		return 1;
-	}
-
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_NAND)
-/*
- *	hardware specific access to control-lines
- *
- *	NAND_NCE: bit 0 - don't care
- *	NAND_CLE: bit 1 -> bit 1  (0x0002)
- *	NAND_ALE: bit 2 -> bit 2  (0x0004)
- */
-static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
-	unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	nand->options = NAND_SAMSUNG_LP_OPTIONS;
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->cmd_ctrl = netstar_nand_hwcontrol;
-	nand->chip_delay = 400;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
deleted file mode 100644
index 72e1811..0000000
--- a/board/netstar/setup.S
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE:		.word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE:	.word 0xfffbc800
-OMAP5910_MPU_TC_BASE:		.word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE:		.word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE:	.word 0xfffe0800
-OMAP5910_DPLL1_BASE:		.word 0xfffecf00
-OMAP5910_GPIO_BASE:		.word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE:	.word 0xfffec800
-OMAP5910_MPUI_BASE:		.word 0xfffec900
-
-_OMAP5910_ARM_CKCTL:		.word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK:		.word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL:		.word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG:		.word 0x00009090
-VAL_EMIFS_CS1_CONFIG:		.word 0x00003031
-VAL_EMIFS_CS2_CONFIG:		.word 0x0000a0a1
-VAL_EMIFS_CS3_CONFIG:		.word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT:		.word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
-				/*     SLRF       SD_RET     ARE        SDRAM_TYPE   ARCV           SDRAM_FREQUENCY PWD     CLK */
-
-#if (PHYS_SDRAM_1_SIZE == SZ_32M)
-VAL_EMIFF_SDRAM_CONFIG:		.word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#else
-VAL_EMIFF_SDRAM_CONFIG:		.word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#endif
-
-VAL_EMIFF_SDRAM_CONFIG2:	.word 0x00000003
-VAL_EMIFF_MRS:			.word 0x00000037
-
-/*
- * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
-	.word 0x0000ff6f
-/*
- * Disable everything (green LED is connected via invertor)
- */
-GPIO_OUTPUT:
-	.word 0x00000010
-
-MUX_CONFIG_BASE:
-	.word 0xfffe1000
-
-MUX_CONFIG_VALUES:
-	.align 4
-	.word 0x00000000	@ FUNC_MUX_CTRL_0
-	.word 0x00000000	@ FUNC_MUX_CTRL_1
-	.word 0x00000000	@ FUNC_MUX_CTRL_2
-	.word 0x00000000	@ FUNC_MUX_CTRL_3
-	.word 0x00000000	@ FUNC_MUX_CTRL_4
-	.word 0x02080480	@ FUNC_MUX_CTRL_5
-	.word 0x0100001c	@ FUNC_MUX_CTRL_6
-	.word 0x0004800b	@ FUNC_MUX_CTRL_7
-	.word 0x10001200	@ FUNC_MUX_CTRL_8
-	.word 0x01201012	@ FUNC_MUX_CTRL_9
-	.word 0x02082248	@ FUNC_MUX_CTRL_A
-	.word 0x00000248	@ FUNC_MUX_CTRL_B
-	.word 0x12240000	@ FUNC_MUX_CTRL_C
-	.word 0x00002000	@ FUNC_MUX_CTRL_D
-	.word 0x00000000	@ PULL_DWN_CTRL_0
-	.word 0x00000800	@ PULL_DWN_CTRL_1
-	.word 0x01801000	@ PULL_DWN_CTRL_2
-	.word 0x00000000	@ PULL_DWN_CTRL_3
-	.word 0x00000000	@ GATE_INH_CTRL_0
-	.word 0x00000000	@ VOLTAGE_CTRL_0
-	.word 0x00000000	@ TEST_DBG_CTRL_0
-	.word 0x00000006	@ MOD_CONF_CTRL_0
-	.word 0x0000eaef	@ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
-	.align 1
-	.byte 0x00		@ FUNC_MUX_CTRL_0
-	.byte 0x04		@ FUNC_MUX_CTRL_1
-	.byte 0x08		@ FUNC_MUX_CTRL_2
-	.byte 0x10		@ FUNC_MUX_CTRL_3
-	.byte 0x14		@ FUNC_MUX_CTRL_4
-	.byte 0x18		@ FUNC_MUX_CTRL_5
-	.byte 0x1c		@ FUNC_MUX_CTRL_6
-	.byte 0x20		@ FUNC_MUX_CTRL_7
-	.byte 0x24		@ FUNC_MUX_CTRL_8
-	.byte 0x28		@ FUNC_MUX_CTRL_9
-	.byte 0x2c		@ FUNC_MUX_CTRL_A
-	.byte 0x30		@ FUNC_MUX_CTRL_B
-	.byte 0x34		@ FUNC_MUX_CTRL_C
-	.byte 0x38		@ FUNC_MUX_CTRL_D
-	.byte 0x40		@ PULL_DWN_CTRL_0
-	.byte 0x44		@ PULL_DWN_CTRL_1
-	.byte 0x48		@ PULL_DWN_CTRL_2
-	.byte 0x4c		@ PULL_DWN_CTRL_3
-	.byte 0x50		@ GATE_INH_CTRL_0
-	.byte 0x60		@ VOLTAGE_CTRL_0
-	.byte 0x70		@ TEST_DBG_CTRL_0
-	.byte 0x80		@ MOD_CONF_CTRL_0
-	.byte 0x0c		@ COMP_MODE_CTRL_0
-	.byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Improve performance a bit... */
-	mrc	p15, 0, r1, c0, c0, 0		@ read C15 ID register
-	mrc	p15, 0, r1, c0, c0, 1		@ read C15 Cache information register
-	mrc	p15, 0, r1, c1, c0, 0		@ read C15 Control register
-	orr	r1, r1, #0x1000			@ enable I-cache, map interrupt vector 0xffff0000
-	mcr	p15, 0, r1, c1, c0, 0		@ write C15 Control register
-	mov	r1, #0x00
-	mcr	p15, 0, r1, c7, c5, 0		@ Flush I-cache
-	nop
-	nop
-	nop
-	nop
-
-	/* Setup clocking mode */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
-	ldrh	r1, [r0, #0x18]			@ ARM_SYST - get reset status
-	bic	r1, r1, #(7 << 11)		@ clear clock select
-	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
-	mov	r2, #0
-loop:
-	cmp	r2, #1				@ this loop will wait for at least 100 cycles
-	streqh	r1, [r0, #0x18]			@ before issuing next request from MPU
-	add	r2, r2, #1			@ on the 1st run code is loaded into I-cache
-	cmp	r2, #16				@ and second run will set clocking mode
-	bne	loop
-	nop
-
-	/* Setup clock dividers */
-	ldr	r1, _OMAP5910_ARM_CKCTL
-	orr	r1, r1, #0x2000			@ enable DSP clock
-	strh	r1, [r0]			@ setup clock divisors
-
-	/* Setup DPLL to generate requested freq */
-	ldr	r0, OMAP5910_DPLL1_BASE		@ base of DPLL1 register
-	mov	r1, #0x0010			@ set PLL_ENABLE
-	orr	r1, r1, #0x2000			@ set IOB to new locking
-	orr	r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
-	orr	r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
-	strh	r1, [r0]			@ write
-
-locking:
-	ldrh	r1, [r0]			@ get DPLL value
-	tst	r1, #0x01
-	beq	locking				@ while LOCK not set
-
-	/* Enable clock */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
-	mov	r1, #(1 << 10)			@ disable idle mode do not check
-						@ nWAKEUP pin, other remain active
-	strh	r1, [r0, #0x04]
-	ldr	r1, _OMAP5910_ARM_EN_CLK
-	strh	r1, [r0, #0x08]
-	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
-	strh	r1, [r0, #0x0c]			@ max delayed ( 32 x CLKIN )
-
-	/* Configure 5910 pins functions to match our board. */
-	ldr     r0, MUX_CONFIG_BASE
-	adr	r1, MUX_CONFIG_VALUES
-	adr	r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
-	ldrb	r3, [r2], #1
-	ldr	r4, [r1], #4
-	cmp	r3, #0xff
-	strne	r4, [r0, r3]
-	bne	next_mux_cfg
-
-	/* Configure GPIO pins (also disables Green LED) */
-	ldr	r0, OMAP5910_GPIO_BASE
-	ldr	r1, GPIO_OUTPUT
-	strh    r1, [r0, #0x04]
-	ldr	r1, GPIO_DIRECTION
-	strh	r1, [r0, #0x08]
-
-	/* EnablePeripherals */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ CLOCK unit
-	mov	r1, #0x0001			@ Peripheral enable
-	strh	r1, [r0, #0x14]
-
-	/* Program LED Pulse Generator */
-	ldr	r0, OMAP5910_LPG1_BASE		@ 1st LED Pulse Generator
-	mov	r1, #0x7F			@ Set obscure frequency in
-	strb	r1, [r0, #0x00]			@ LCR
-	mov	r1, #0x01			@ Enable clock (CLK_EN) in
-	strb    r1, [r0, #0x04]			@ PMR
-
-	/* TIPB Lock UART1 */
-	ldr	r0, OMAP5910_TIPB_SWITCHES_BASE	@ prepare base of TIPB switches
-	mov	r1, #1				@ ARM allocated
-	strh	r1, [r0,#0x04]			@ clear IRQ line and status bits
-	strh	r1, [r0,#0x00]
-	ldrh	r1, [r0,#0x04]
-
-	/* Disable watchdog */
-	ldr	r0, OMAP5910_MPU_WD_TIMER_BASE
-	mov	r1, #0xf5
-	strh	r1, [r0, #0x8]
-	mov	r1, #0xa0
-	strh	r1, [r0, #0x8]
-
-	/* Enable MCLK */
-	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE
-	mov	r1, #0x6
-	strh	r1, [r0, #0x34]
-	strh	r1, [r0, #0x34]
-
-	/* Setup clock divisors */
-	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE	@ base of ULDPL DPLL1 register
-
-	mov	r1, #0x0010			@ set PLL_ENABLE
-	orr	r1, r1, #0x2000			@ set IOB to new locking
-	strh	r1, [r0]			@ write
-
-ulocking:
-	ldrh	r1, [r0]			@ get DPLL value
-	tst	r1, #1
-	beq	ulocking			@ while LOCK not set
-
-	/* EMIF init */
-	ldr	r0, OMAP5910_MPU_TC_BASE
-	ldrh	r1, [r0, #0x0c]			@ EMIFS_CONFIG_REG
-	bic	r1, r1, #0x0c			@ pwr down disabled, flash WP
-	orr	r1, r1, #0x01
-	str	r1, [r0, #0x0c]
-
-	ldr	r1, VAL_EMIFS_CS0_CONFIG
-	str	r1, [r0, #0x10]			@ EMIFS_CS0_CONFIG
-	ldr	r1, VAL_EMIFS_CS1_CONFIG
-	str	r1, [r0, #0x14]			@ EMIFS_CS1_CONFIG
-	ldr	r1, VAL_EMIFS_CS2_CONFIG
-	str	r1, [r0, #0x18]			@ EMIFS_CS2_CONFIG
-	ldr	r1, VAL_EMIFS_CS3_CONFIG
-	str	r1, [r0, #0x1c]			@ EMIFS_CS3_CONFIG
-	ldr	r1, VAL_EMIFS_DYN_WAIT
-	str	r1, [r0, #0x40]			@ EMIFS_CFG_DYN_WAIT
-
-	/* Setup SDRAM */
-	ldr	r1, VAL_EMIFF_SDRAM_CONFIG
-	str	r1, [r0, #0x20]			@ EMIFF_SDRAM_CONFIG
-	ldr	r1, VAL_EMIFF_SDRAM_CONFIG2
-	str	r1, [r0, #0x3c]			@ EMIFF_SDRAM_CONFIG2
-	ldr	r1, VAL_EMIFF_MRS
-	str	r1, [r0, #0x24]			@ EMIFF_MRS
-	/* SDRAM needs 100us to stabilize */
-	mov	r0, #0x4000
-sdelay:
-	subs	r0, r0, #0x1
-	bne	sdelay
-
-	/* back to arch calling code */
-	mov	pc, lr
-.end
diff --git a/boards.cfg b/boards.cfg
index 39b9199..52d3dd9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -70,7 +70,6 @@ sbc2410x                     arm         arm920t     -                   -
 VCMA9                        arm         arm920t     vcma9               mpl            s3c24x0
 smdk2400                     arm         arm920t     -                   samsung        s3c24x0
 smdk2410                     arm         arm920t     -                   samsung        s3c24x0
-netstar                      arm         arm925t
 voiceblue                    arm         arm925t
 omap1510inn                  arm         arm925t     -                   ti
 integratorap_cm926ejs        arm         arm926ejs   integrator          armltd         -           integratorap
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 85d84d7..b169dbe 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+netstar	arm	arm925t	-	  2011-07-17
 mx1fs2	arm	arm920t	-	  2011-07-17
 lpd7a404 arm	lh7a40x	-	  2011-07-17
 edb9301	arm	arm920t	-	  2011-07-17
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
deleted file mode 100644
index f159013..0000000
--- a/include/configs/netstar.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP NetStar board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T	1		/* This is an arm925t CPU */
-#define CONFIG_OMAP	1		/* in a TI OMAP core */
-#define CONFIG_OMAP1510 1		/* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ		150000000	/* 150MHz */
-#define CONFIG_XTAL_FREQ		12000000	/*  12MHz */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R		/* There is nothing to really init */
-#define BOARD_LATE_INIT			/* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x10000000
-#define PHYS_SDRAM_1_SIZE		(64 * 1024 * 1024)
-#define PHYS_FLASH_1			0x00000000
-
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			0x4000
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND		0x6000
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-/*
- * The stack size is set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE		0x04000300
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	19
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL		1
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=gen_nand.0"
-#define MTDPARTS_DEFAULT	"mtdparts=" \
-	"physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
-	"gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
-#define CONFIG_BOOTCOMMAND	"run fboot"
-#define CONFIG_PREBOOT		"run setup"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"autostart=yes\0"						\
-	"ospart=0\0"							\
-	"setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0"	\
-	"setpart="							\
-	"if test -n $swapos; then "					\
-		"setenv swapos; saveenv; "				\
-		"if test $ospart -eq 0; then "				\
-			"setenv ospart 1; "				\
-		"else "							\
-			"setenv ospart 0; "				\
-		"fi; "							\
-	"fi\0"								\
-	"nfsargs=setenv bootargs $bootargs "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
-		"nfsroot=$rootpath root=/dev/nfs\0"			\
-	"flashargs=run setpart;setenv bootargs $bootargs "		\
-		"root=mtd:rootfs$ospart ro "				\
-		"rootfstype=jffs2\0"					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0"	\
-	"fboot=run flashargs;nboot kernel$ospart\0"			\
-	"nboot=bootp;run nfsargs;tftp\0"
-
-#if 0	/* feel free to disable for development */
-#define	CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"\nNetStar PBX - boot in %d secs...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"."	/* 1st "password"	*/
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"# "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-	 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-
-#define CONFIG_SYS_LOAD_ADDR		(PHYS_SDRAM_1 + 0x400000)
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV			7
-#define CONFIG_SYS_HZ			1000
-
-#define OMAP5910_DPLL_DIV		1
-#define OMAP5910_DPLL_MUL		\
-	((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
-#define OMAP5910_LCD_DIV	2	/* CKL/4 */
-#define OMAP5910_ARM_DIV	0	/* CKL/1 */
-#define OMAP5910_DSP_DIV	0	/* CKL/1 */
-#define OMAP5910_TC_DIV		1	/* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b */
-#define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
-				 (OMAP5910_LCD_DIV << 2) |	\
-				 (OMAP5910_ARM_DIV << 4) |	\
-				 (OMAP5910_DSP_DIV << 6) |	\
-				 (OMAP5910_TC_DIV << 8) |	\
-				 (OMAP5910_DSP_MMU_DIV << 10) |	\
-				 (OMAP5910_ARM_TIM_SEL << 12))
-
-#endif	/* __CONFIG_H */
