new file mode 100644
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __I2C_GPIO_H_
+#define __I2C_GPIO_H_
+
+#ifndef __ASSEMBLY__
+struct i2c_gpio_bus_data {
+ unsigned int gpio_base;
+ unsigned int sda_pin;
+ unsigned int scl_pin;
+};
+
+struct i2c_gpio_bus {
+ struct i2c_gpio_bus_data *bus;
+};
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index);
+void i2c_gpio_dir(int dir);
+void i2c_gpio_set(int line, int value);
+int i2c_gpio_get(void);
+void i2c_gpio_set_bus(int index);
+
+#define I2C_SDA(x) i2c_gpio_set(1, x)
+#define I2C_SCL(x) i2c_gpio_set(0, x)
+#define I2C_READ (!!i2c_gpio_get())
+#define I2C_ACTIVE i2c_gpio_dir(1)
+#define I2C_TRISTATE i2c_gpio_dir(0)
+#define I2C_DELAY udelay(5)
+
+#endif
+#endif
@@ -1,7 +1,8 @@
/*
- * Copyright (C) 2008-2009 Samsung Electronics
+ * Copyright (C) 2008-2011 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
+ * Lukasz Majewski <l.majewski@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,6 +24,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
@@ -96,3 +98,32 @@ int board_mmc_init(bd_t *bis)
return s5p_mmc_init(0, 4);
}
#endif
+
+/* Define I2C parameters to handle usb transmission */
+enum { I2C_PMIC, I2C_NUM, };
+
+/*
+ * i2c pmic
+ * SDA: GPJ4[0]
+ * SCL: GPJ4[3]
+ */
+static struct i2c_gpio_bus_data i2c_pmic = {
+ .sda_pin = 0,
+ .scl_pin = 3,
+};
+
+static struct i2c_gpio_bus i2c_gpio[] = {
+ {
+ .bus = &i2c_pmic,
+ },
+};
+
+#define S5PC110_GPIO_J3 0XE02002C0
+
+void i2c_init_board(void)
+{
+ i2c_gpio[I2C_PMIC].bus = &i2c_pmic;
+ i2c_gpio[I2C_PMIC].bus->gpio_base = S5PC110_GPIO_J3;
+
+ i2c_gpio_init(i2c_gpio, I2C_NUM, I2C_PMIC);
+}
@@ -42,6 +42,7 @@ COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
+COBJS-$(CONFIG_S5P_GPIO_I2C) += s5p_gpio_i2c.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
new file mode 100644
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/i2c-gpio.h>
+#include <i2c.h>
+
+#ifdef CONFIG_SOFT_I2C
+
+static struct i2c_gpio_bus *i2c_gpio;
+
+void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index)
+{
+ int i;
+ struct s5p_gpio_bank *bank;
+
+ i2c_gpio = bus;
+
+ /* init all i2c gpio buses */
+ for (i = 0; i < len; i++) {
+ if (!i2c_gpio[i].bus)
+ continue;
+
+ bank = (struct s5p_gpio_bank *)i2c_gpio[i].bus->gpio_base;
+ if (!bank)
+ continue;
+
+ /* SDA */
+ gpio_direction_output(bank,
+ i2c_gpio[i].bus->sda_pin, 1);
+
+ /* SCL */
+ gpio_direction_output(bank,
+ i2c_gpio[i].bus->scl_pin, 1);
+ }
+
+ /* set default bus */
+ i2c_set_bus_num(index);
+}
+
+void i2c_gpio_set(int line, int value)
+{
+ struct s5p_gpio_bank *bank;
+ unsigned int bus_index;
+
+ bus_index = i2c_get_bus_num();
+
+ if (!i2c_gpio[bus_index].bus)
+ return;
+
+ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+ if (!bank)
+ return;
+
+ if (line)
+ line = i2c_gpio[bus_index].bus->sda_pin;
+ else
+ line = i2c_gpio[bus_index].bus->scl_pin;
+
+ gpio_set_value(bank, line, value);
+}
+
+int i2c_gpio_get(void)
+{
+ struct s5p_gpio_bank *bank;
+ unsigned int bus_index;
+
+ bus_index = i2c_get_bus_num();
+ if (!i2c_gpio[bus_index].bus)
+ return 0;
+
+ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+ if (!bank)
+ return 0;
+
+ return gpio_get_value(bank, i2c_gpio[bus_index].bus->sda_pin);
+}
+
+void i2c_gpio_dir(int dir)
+{
+ struct s5p_gpio_bank *bank;
+ unsigned int bus_index;
+
+ bus_index = i2c_get_bus_num();
+ if (!i2c_gpio[bus_index].bus)
+ return;
+
+ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
+ if (!bank)
+ return;
+
+ if (dir) {
+ gpio_direction_output(bank,
+ i2c_gpio[bus_index].bus->sda_pin, 0);
+ } else {
+ gpio_direction_input(bank,
+ i2c_gpio[bus_index].bus->sda_pin);
+ }
+}
+
+#endif /* CONFIG_SOFT_I2C */
@@ -221,4 +221,12 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+/* I2C Soft */
+#include <asm/arch/i2c-gpio.h>
+#define CONFIG_S5P_GPIO_I2C 1
+#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
#endif /* __CONFIG_H */
This commit adds I2C software support for Samsung's S5PC110 family of processors. The generic drivers/i2c/soft_i2c framework is used, with routines provided by this commit. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> --- arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h | 52 +++++++++++ board/samsung/goni/goni.c | 33 +++++++- drivers/i2c/Makefile | 1 + drivers/i2c/s5p_gpio_i2c.c | 123 ++++++++++++++++++++++++++ include/configs/s5p_goni.h | 8 ++ 5 files changed, 216 insertions(+), 1 deletions(-) create mode 100644 arch/arm/include/asm/arch-s5pc1xx/i2c-gpio.h create mode 100644 drivers/i2c/s5p_gpio_i2c.c