diff mbox

[U-Boot,7/7] Tegra2: config: enable network booting

Message ID 1304038371-22931-8-git-send-email-sjg@chromium.org
State Superseded, archived
Headers show

Commit Message

Simon Glass April 29, 2011, 12:52 a.m. UTC
This enables networking booting using a USB dongle plugged into the side
seaboard port.

Signed-off-by: Simon Glass <sjg@chromium.org>
---
 include/configs/seaboard.h      |    5 +++
 include/configs/tegra2-common.h |   66 +++++++++++++++++++++++++++++++++++++--
 2 files changed, 68 insertions(+), 3 deletions(-)

--
1.7.3.1
diff mbox

Patch

diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 76ffd95..696fbff 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -53,4 +53,9 @@ 
 /* Put USB1 in host mode */
 #define CONFIG_TEGRA2_USB1_HOST

+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+	"board=seaboard\0" \
+
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h
index ae417ea..0b6c928 100644
--- a/include/configs/tegra2-common.h
+++ b/include/configs/tegra2-common.h
@@ -113,6 +113,9 @@ 
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2

+/* support USB ethernet adapters */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX

 /* include default commands */
 #include <config_cmd_default.h>
@@ -123,7 +126,37 @@ 
 #undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_NFS		/* NFS support */
-#undef CONFIG_CMD_NET		/* network support */
+
+/*
+ * Ethernet support
+ */
+#define CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/*
+ * BOOTP / TFTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_TFTP_TSIZE
+
+#define CONFIG_IPADDR		10.0.0.2
+#define CONFIG_SERVERIP		10.0.0.1
+#define CONFIG_BOOTFILE		uImage
+
+/*
+ * We decorate the nfsroot name so that multiple users / boards can easily
+ * share an NFS server:
+ *   user - username, e.g. 'frank'
+ *   board - board, e.g. 'seaboard'
+ *   serial - serial number, e.g. '1234'
+ */
+#define CONFIG_ROOTPATH		"/export/nfsroot-${user}-${board}-${serial#}"
+#define CONFIG_TFTPPATH		"/tftpboot/uImage-${user}-${board}-${serial#}"

 /* turn on command-line edit/hist/auto */
 #define CONFIG_CMDLINE_EDITING
@@ -133,10 +166,37 @@ 
 #define CONFIG_SYS_NO_FLASH

 /* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 	"console=ttyS0,115200n8\0" \
-	"mem=" TEGRA2_SYSMEM "\0" \
 	"smpflag=smp\0" \
+	"user=user\0" \
+	"serial#=1\0" \
+	"tftpserverip=172.22.72.144\0" \
+	"nfsserverip=172.22.72.144\0" \
+	"extra_bootargs=\0" \
+	"platform_extras=mem= " TEGRA2_SYSMEM"\0" \
+	"regen_all="\
+		"setenv common_bootargs console=${console} " \
+		"${platform_extras} noinitrd; " \
+		"setenv bootargs ${common_bootargs} ${extra_bootargs} " \
+		"${bootdev_bootargs}\0" \
+	"regen_net_bootargs=setenv bootdev_bootargs " \
+		"dev=/dev/nfs4 rw nfsroot=${nfsserverip}:${rootpath} " \
+		"ip=dhcp; " \
+		"run regen_all\0" \
+	"dhcp_setup=setenv tftppath " CONFIG_TFTPPATH "; " \
+		"setenv rootpath " CONFIG_ROOTPATH "; " \
+		"setenv autoload n; " \
+		"run regen_net_bootargs\0" \
+	"dhcp_boot=run dhcp_setup; " \
+		"bootp; tftpboot ${loadaddr} ${tftpserverip}:${tftppath}; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"usb start; "\
+	"if test ${ethact} != \"\"; then "\
+	"run dhcp_boot ; " \
+	"fi ; " \

 #define CONFIG_LOADADDR		0x408000	/* def. location for kernel */
 #define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */