diff mbox

[U-Boot,V3,3/5] I2C: add i2c support for Pantheon platform

Message ID 1300344306-26608-4-git-send-email-leiwen@marvell.com
State Superseded
Headers show

Commit Message

Lei Wen March 17, 2011, 6:45 a.m. UTC
Add i2c support to dkb board with pantheon soc.

Signed-off-by: Lei Wen <leiwen@marvell.com>
---
Changelog:
V3:
clean code sytle issue
Add i2c clock enable code include in I2C configure define block

 arch/arm/cpu/arm926ejs/pantheon/cpu.c    |   12 ++++++++++++
 arch/arm/include/asm/arch-pantheon/cpu.h |    4 +++-
 arch/arm/include/asm/arch-pantheon/mfp.h |    6 ++++--
 board/Marvell/dkb/dkb.c                  |    4 ++++
 include/configs/dkb.h                    |   11 +++++++++++
 5 files changed, 34 insertions(+), 3 deletions(-)

Comments

Prafulla Wadaskar March 22, 2011, 11:22 a.m. UTC | #1
> -----Original Message-----
> From: Lei Wen [mailto:leiwen@marvell.com]
> Sent: Thursday, March 17, 2011 12:15 PM
> To: Heiko Schocher; Wolfgang Denk; Prafulla Wadaskar; u-
> boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik;
> adrian.wenl@gmail.com
> Subject: [PATCH V3 3/5] I2C: add i2c support for Pantheon platform
> 
> Add i2c support to dkb board with pantheon soc.
> 
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> ---
> Changelog:
> V3:
> clean code sytle issue
> Add i2c clock enable code include in I2C configure define block
> 
>  arch/arm/cpu/arm926ejs/pantheon/cpu.c    |   12 ++++++++++++
>  arch/arm/include/asm/arch-pantheon/cpu.h |    4 +++-
>  arch/arm/include/asm/arch-pantheon/mfp.h |    6 ++++--
>  board/Marvell/dkb/dkb.c                  |    4 ++++
>  include/configs/dkb.h                    |   11 +++++++++++
>  5 files changed, 34 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> index 9ddc77c..8b2eafa 100644
> --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
> @@ -59,6 +59,12 @@ int arch_cpu_init(void)
>  	/* Enable GPIO clock */
>  	writel(APBC_APBCLK, &apbclkres->gpio);
> 
> +#ifdef CONFIG_I2C_MV
> +	/* Enable I2C clock */
> +	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
> +	writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
> +#endif
> +
>  	icache_enable();
> 
>  	return 0;
> @@ -76,3 +82,9 @@ int print_cpuinfo(void)
>  	return 0;
>  }
>  #endif
> +
> +#ifdef CONFIG_I2C_MV
> +void i2c_clk_enable(void)
> +{
> +}

Empty function !!

> +#endif
> diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h
> b/arch/arm/include/asm/arch-pantheon/cpu.h
> index 30f4393..60955c5 100644
> --- a/arch/arm/include/asm/arch-pantheon/cpu.h
> +++ b/arch/arm/include/asm/arch-pantheon/cpu.h
> @@ -50,7 +50,9 @@ struct panthapb_registers {
>  	u32 uart0;	/*0x000*/
>  	u32 uart1;	/*0x004*/
>  	u32 gpio;	/*0x008*/
> -	u8 pad0[0x034 - 0x08 - 4];
> +	u8 pad0[0x02c - 0x08 - 4];
> +	u32 twsi;	/*0x02c*/
> +	u8 pad1[0x034 - 0x2c - 4];
>  	u32 timers;	/*0x034*/
>  };
> 
> diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h
> b/arch/arm/include/asm/arch-pantheon/mfp.h
> index fb291cf..e939196 100644
> --- a/arch/arm/include/asm/arch-pantheon/mfp.h
> +++ b/arch/arm/include/asm/arch-pantheon/mfp.h
> @@ -32,8 +32,10 @@
>   * offset, pull,pF, drv,dF, edge,eF ,afn,aF
>   */
>  /* UART2 */
> -#define MFP47_UART2_RXD		MFP_REG(0x198) | MFP_AF6 |
> MFP_DRIVE_MEDIUM
> -#define MFP48_UART2_TXD		MFP_REG(0x19c) | MFP_AF6 |
> MFP_DRIVE_MEDIUM
> +#define MFP47_UART2_RXD		(MFP_REG(0x198) | MFP_AF6 |
> MFP_DRIVE_MEDIUM)
> +#define MFP48_UART2_TXD		(MFP_REG(0x19c) | MFP_AF6 |
> MFP_DRIVE_MEDIUM)
> +#define MFP53_CI2C_SCL		(MFP_REG(0x1b0) | MFP_AF2 |
> MFP_DRIVE_MEDIUM)
> +#define MFP54_CI2C_SDA		(MFP_REG(0x1b4) | MFP_AF2 |
> MFP_DRIVE_MEDIUM)
> 
>  /* More macros can be defined here... */
> 
> diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
> index 72a2d2a..00f73e7 100644
> --- a/board/Marvell/dkb/dkb.c
> +++ b/board/Marvell/dkb/dkb.c
> @@ -36,6 +36,10 @@ int board_early_init_f(void)
>  		MFP47_UART2_RXD,
>  		MFP48_UART2_TXD,
> 
> +		/* I2C */
> +		MFP53_CI2C_SCL,
> +		MFP54_CI2C_SDA,
> +
>  		MFP_EOC		/*End of configureation*/
>  	};
>  	/* configure MFP's */
> diff --git a/include/configs/dkb.h b/include/configs/dkb.h
> index 638af5e..1b18c44 100644
> --- a/include/configs/dkb.h
> +++ b/include/configs/dkb.h
> @@ -56,6 +56,17 @@
>  #include "mv-common.h"
> 
>  #undef CONFIG_ARCH_MISC_INIT
> +
> +/*
> + * I2C definition
> + */
> +#define CONFIG_CMD_I2C
> +#define CONFIG_I2C_MV			1
> +#define CONFIG_PXA_I2C_REG		0xd4011000
> +#define CONFIG_HARD_I2C			1
> +#define CONFIG_SYS_I2C_SPEED		0
> +#define CONFIG_SYS_I2C_SLAVE		0xfe
> +
What about if I don't want to include this support
These configuration must if ifdefed with CONFIG_CMD_I2C which will be defined in board config file.

Regards..
Prafulla . .
Lei Wen March 22, 2011, 12:38 p.m. UTC | #2
Hi Prafulla,

On Tue, Mar 22, 2011 at 7:22 PM, Prafulla Wadaskar <prafulla@marvell.com> wrote:
>
>
>> -----Original Message-----
>> From: Lei Wen [mailto:leiwen@marvell.com]
>> Sent: Thursday, March 17, 2011 12:15 PM
>> To: Heiko Schocher; Wolfgang Denk; Prafulla Wadaskar; u-
>> boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik;
>> adrian.wenl@gmail.com
>> Subject: [PATCH V3 3/5] I2C: add i2c support for Pantheon platform
>>
>> Add i2c support to dkb board with pantheon soc.
>>
>> Signed-off-by: Lei Wen <leiwen@marvell.com>
>> ---
>> Changelog:
>> V3:
>> clean code sytle issue
>> Add i2c clock enable code include in I2C configure define block
>>
>>  arch/arm/cpu/arm926ejs/pantheon/cpu.c    |   12 ++++++++++++
>>  arch/arm/include/asm/arch-pantheon/cpu.h |    4 +++-
>>  arch/arm/include/asm/arch-pantheon/mfp.h |    6 ++++--
>>  board/Marvell/dkb/dkb.c                  |    4 ++++
>>  include/configs/dkb.h                    |   11 +++++++++++
>>  5 files changed, 34 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
>> b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
>> index 9ddc77c..8b2eafa 100644
>> --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
>> +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
>> @@ -59,6 +59,12 @@ int arch_cpu_init(void)
>>       /* Enable GPIO clock */
>>       writel(APBC_APBCLK, &apbclkres->gpio);
>>
>> +#ifdef CONFIG_I2C_MV
>> +     /* Enable I2C clock */
>> +     writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
>> +     writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
>> +#endif
>> +
>>       icache_enable();
>>
>>       return 0;
>> @@ -76,3 +82,9 @@ int print_cpuinfo(void)
>>       return 0;
>>  }
>>  #endif
>> +
>> +#ifdef CONFIG_I2C_MV
>> +void i2c_clk_enable(void)
>> +{
>> +}
>
> Empty function !!

As you might notice, this driver is directly taken from original cpu/pxa/i2c.c.
Original driver implent a global i2c clock enable in the reset
function call, which
is not needed by other platform, like the armada100 and pantheon.

But certainly I couldn't just rudely remove that code. So this is the reason
why I crreate the i2c_clk_enable function call and define it as void
one for the armada100
and pantheon.

>
>> +#endif
>> diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h
>> b/arch/arm/include/asm/arch-pantheon/cpu.h
>> index 30f4393..60955c5 100644
>> --- a/arch/arm/include/asm/arch-pantheon/cpu.h
>> +++ b/arch/arm/include/asm/arch-pantheon/cpu.h
>> @@ -50,7 +50,9 @@ struct panthapb_registers {
>>       u32 uart0;      /*0x000*/
>>       u32 uart1;      /*0x004*/
>>       u32 gpio;       /*0x008*/
>> -     u8 pad0[0x034 - 0x08 - 4];
>> +     u8 pad0[0x02c - 0x08 - 4];
>> +     u32 twsi;       /*0x02c*/
>> +     u8 pad1[0x034 - 0x2c - 4];
>>       u32 timers;     /*0x034*/
>>  };
>>
>> diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h
>> b/arch/arm/include/asm/arch-pantheon/mfp.h
>> index fb291cf..e939196 100644
>> --- a/arch/arm/include/asm/arch-pantheon/mfp.h
>> +++ b/arch/arm/include/asm/arch-pantheon/mfp.h
>> @@ -32,8 +32,10 @@
>>   * offset, pull,pF, drv,dF, edge,eF ,afn,aF
>>   */
>>  /* UART2 */
>> -#define MFP47_UART2_RXD              MFP_REG(0x198) | MFP_AF6 |
>> MFP_DRIVE_MEDIUM
>> -#define MFP48_UART2_TXD              MFP_REG(0x19c) | MFP_AF6 |
>> MFP_DRIVE_MEDIUM
>> +#define MFP47_UART2_RXD              (MFP_REG(0x198) | MFP_AF6 |
>> MFP_DRIVE_MEDIUM)
>> +#define MFP48_UART2_TXD              (MFP_REG(0x19c) | MFP_AF6 |
>> MFP_DRIVE_MEDIUM)
>> +#define MFP53_CI2C_SCL               (MFP_REG(0x1b0) | MFP_AF2 |
>> MFP_DRIVE_MEDIUM)
>> +#define MFP54_CI2C_SDA               (MFP_REG(0x1b4) | MFP_AF2 |
>> MFP_DRIVE_MEDIUM)
>>
>>  /* More macros can be defined here... */
>>
>> diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
>> index 72a2d2a..00f73e7 100644
>> --- a/board/Marvell/dkb/dkb.c
>> +++ b/board/Marvell/dkb/dkb.c
>> @@ -36,6 +36,10 @@ int board_early_init_f(void)
>>               MFP47_UART2_RXD,
>>               MFP48_UART2_TXD,
>>
>> +             /* I2C */
>> +             MFP53_CI2C_SCL,
>> +             MFP54_CI2C_SDA,
>> +
>>               MFP_EOC         /*End of configureation*/
>>       };
>>       /* configure MFP's */
>> diff --git a/include/configs/dkb.h b/include/configs/dkb.h
>> index 638af5e..1b18c44 100644
>> --- a/include/configs/dkb.h
>> +++ b/include/configs/dkb.h
>> @@ -56,6 +56,17 @@
>>  #include "mv-common.h"
>>
>>  #undef CONFIG_ARCH_MISC_INIT
>> +
>> +/*
>> + * I2C definition
>> + */
>> +#define CONFIG_CMD_I2C
>> +#define CONFIG_I2C_MV                        1
>> +#define CONFIG_PXA_I2C_REG           0xd4011000
>> +#define CONFIG_HARD_I2C                      1
>> +#define CONFIG_SYS_I2C_SPEED         0
>> +#define CONFIG_SYS_I2C_SLAVE         0xfe
>> +
> What about if I don't want to include this support
> These configuration must if ifdefed with CONFIG_CMD_I2C which will be defined in board config file.

Yep, that make sense. I would include this change for next post.

Thanks,
Lei
diff mbox

Patch

diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
index 9ddc77c..8b2eafa 100644
--- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
+++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
@@ -59,6 +59,12 @@  int arch_cpu_init(void)
 	/* Enable GPIO clock */
 	writel(APBC_APBCLK, &apbclkres->gpio);
 
+#ifdef CONFIG_I2C_MV
+	/* Enable I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
+	writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
+#endif
+
 	icache_enable();
 
 	return 0;
@@ -76,3 +82,9 @@  int print_cpuinfo(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_I2C_MV
+void i2c_clk_enable(void)
+{
+}
+#endif
diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h
index 30f4393..60955c5 100644
--- a/arch/arm/include/asm/arch-pantheon/cpu.h
+++ b/arch/arm/include/asm/arch-pantheon/cpu.h
@@ -50,7 +50,9 @@  struct panthapb_registers {
 	u32 uart0;	/*0x000*/
 	u32 uart1;	/*0x004*/
 	u32 gpio;	/*0x008*/
-	u8 pad0[0x034 - 0x08 - 4];
+	u8 pad0[0x02c - 0x08 - 4];
+	u32 twsi;	/*0x02c*/
+	u8 pad1[0x034 - 0x2c - 4];
 	u32 timers;	/*0x034*/
 };
 
diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h
index fb291cf..e939196 100644
--- a/arch/arm/include/asm/arch-pantheon/mfp.h
+++ b/arch/arm/include/asm/arch-pantheon/mfp.h
@@ -32,8 +32,10 @@ 
  * offset, pull,pF, drv,dF, edge,eF ,afn,aF
  */
 /* UART2 */
-#define MFP47_UART2_RXD		MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM
-#define MFP48_UART2_TXD		MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM
+#define MFP47_UART2_RXD		(MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM)
+#define MFP48_UART2_TXD		(MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
+#define MFP53_CI2C_SCL		(MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFP54_CI2C_SDA		(MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
 
 /* More macros can be defined here... */
 
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
index 72a2d2a..00f73e7 100644
--- a/board/Marvell/dkb/dkb.c
+++ b/board/Marvell/dkb/dkb.c
@@ -36,6 +36,10 @@  int board_early_init_f(void)
 		MFP47_UART2_RXD,
 		MFP48_UART2_TXD,
 
+		/* I2C */
+		MFP53_CI2C_SCL,
+		MFP54_CI2C_SDA,
+
 		MFP_EOC		/*End of configureation*/
 	};
 	/* configure MFP's */
diff --git a/include/configs/dkb.h b/include/configs/dkb.h
index 638af5e..1b18c44 100644
--- a/include/configs/dkb.h
+++ b/include/configs/dkb.h
@@ -56,6 +56,17 @@ 
 #include "mv-common.h"
 
 #undef CONFIG_ARCH_MISC_INIT
+
+/*
+ * I2C definition
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_MV			1
+#define CONFIG_PXA_I2C_REG		0xd4011000
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		0
+#define CONFIG_SYS_I2C_SLAVE		0xfe
+
 /*
  * Environment variables configurations
  */