@@ -36,6 +36,7 @@
#include <common.h>
#include <command.h>
#include <asm/processor.h>
+#include <asm/processor-flags.h>
#include <asm/interrupt.h>
/* Constructor for a conventional segment GDT (or LDT) entry */
@@ -88,12 +89,16 @@ static void reload_gdt(void)
int cpu_init_f(void)
{
+ const u32 em_rst = ~X86_CR0_EM;
+ const u32 mp_ne_set = X86_CR0_MP | X86_CR0_NE;
+
/* initialize FPU, reset EM, set MP and NE */
asm ("fninit\n" \
- "movl %cr0, %eax\n" \
- "andl $~0x4, %eax\n" \
- "orl $0x22, %eax\n" \
- "movl %eax, %cr0\n" );
+ "movl %%cr0, %%eax\n" \
+ "andl %0, %%eax\n" \
+ "orl %1, %%eax\n" \
+ "movl %%eax, %%cr0\n" \
+ : : "i" (em_rst), "i" (mp_ne_set) : "eax");
return 0;
}
@@ -30,6 +30,7 @@
#include <common.h>
#include <asm/interrupt.h>
#include <asm/io.h>
+#include <asm/processor-flags.h>
#define DECLARE_INTERRUPT(x) \
".globl irq_"#x"\n" \
@@ -237,7 +238,7 @@ int disable_interrupts(void)
asm volatile ("pushfl ; popl %0 ; cli\n" : "=g" (flags) : );
- return (flags&0x200); /* IE flags is bit 9 */
+ return (flags & X86_EFLAGS_IF); /* IE flags is bit 9 */
}
/* IRQ Low-Level Service Routine */
@@ -26,6 +26,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/processor-flags.h>
#include <asm/ic/sc520.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -41,6 +42,8 @@ volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000;
void init_sc520(void)
{
+ const u32 nw_cd_rst = ~(X86_CR0_NW | X86_CR0_CD);
+
/*
* Set the UARTxCTL register at it's slower,
* baud clock giving us a 1.8432 MHz reference
@@ -84,8 +87,8 @@ void init_sc520(void)
/* turn on the cache and disable write through */
asm("movl %%cr0, %%eax\n"
- "andl $0x9fffffff, %%eax\n"
- "movl %%eax, %%cr0\n" : : : "eax");
+ "andl %0, %%eax\n"
+ "movl %%eax, %%cr0\n" : : "i" (nw_cd_rst): "eax");
}
unsigned long init_sc520_dram(void)
@@ -26,6 +26,7 @@
#include <config.h>
#include <version.h>
#include <asm/global_data.h>
+#include <asm/processor-flags.h>
.section .text
@@ -46,7 +47,7 @@ _i386boot_start:
/* Turn of cache (this might require a 486-class CPU) */
movl %cr0, %eax
- orl $0x60000000, %eax
+ orl $(X86_CR0_NW | X86_CR0_CD), %eax
movl %eax, %cr0
wbinvd
@@ -23,6 +23,7 @@
*/
#include <asm/global_data.h>
+#include <asm/processor-flags.h>
#define BOOT_SEG 0xffff0000 /* linear segment of boot code */
#define a32 .byte 0x67;
@@ -45,7 +46,7 @@ board_init16_ret:
/* Turn of cache (this might require a 486-class CPU) */
movl %cr0, %eax
- orl $0x60000000, %eax
+ orl $(X86_CR0_NW & X86_CR0_CD), %eax
movl %eax, %cr0
wbinvd
@@ -55,7 +56,7 @@ o32 cs lgdt gdt_ptr
/* Now, we enter protected mode */
movl %cr0, %eax
- orl $1, %eax
+ orl $X86_CR0_PE, %eax
movl %eax, %cr0
/* Flush the prefetch queue */
new file mode 100644
@@ -0,0 +1,100 @@
+#ifndef _ASM_X86_PROCESSOR_FLAGS_H
+#define _ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF 0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT 0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE 0x00000001 /* Protection Enable */
+#define X86_CR0_MP 0x00000002 /* Monitor Coprocessor */
+#define X86_CR0_EM 0x00000004 /* Emulation */
+#define X86_CR0_TS 0x00000008 /* Task Switched */
+#define X86_CR0_ET 0x00000010 /* Extension Type */
+#define X86_CR0_NE 0x00000020 /* Numeric Error */
+#define X86_CR0_WP 0x00010000 /* Write Protect */
+#define X86_CR0_AM 0x00040000 /* Alignment Mask */
+#define X86_CR0_NW 0x20000000 /* Not Write-through */
+#define X86_CR0_CD 0x40000000 /* Cache Disable */
+#define X86_CR0_PG 0x80000000 /* Paging */
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT 0x00000008 /* Page Write Through */
+#define X86_CR3_PCD 0x00000010 /* Page Cache Disable */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME 0x00000001 /* enable vm86 extensions */
+#define X86_CR4_PVI 0x00000002 /* virtual interrupts flag enable */
+#define X86_CR4_TSD 0x00000004 /* disable time stamp at ipl 3 */
+#define X86_CR4_DE 0x00000008 /* enable debugging extensions */
+#define X86_CR4_PSE 0x00000010 /* enable page size extensions */
+#define X86_CR4_PAE 0x00000020 /* enable physical address extensions */
+#define X86_CR4_MCE 0x00000040 /* Machine check enable */
+#define X86_CR4_PGE 0x00000080 /* enable global pages */
+#define X86_CR4_PCE 0x00000100 /* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
+#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR 0x0000000F /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ * NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0 0x20
+#define CX86_GCR 0xb8
+#define CX86_CCR0 0xc0
+#define CX86_CCR1 0xc1
+#define CX86_CCR2 0xc2
+#define CX86_CCR3 0xc3
+#define CX86_CCR4 0xe8
+#define CX86_CCR5 0xe9
+#define CX86_CCR6 0xea
+#define CX86_CCR7 0xeb
+#define CX86_PCR1 0xf0
+#define CX86_DIR0 0xfe
+#define CX86_DIR1 0xff
+#define CX86_ARR_BASE 0xc4
+#define CX86_RCR_BASE 0xdc
+
+#ifdef __KERNEL__
+#ifdef CONFIG_VM86
+#define X86_VM_MASK X86_EFLAGS_VM
+#else
+#define X86_VM_MASK 0 /* No VM86 support */
+#endif
+#endif
+
+#endif /* _ASM_X86_PROCESSOR_FLAGS_H */