@@ -11,6 +11,7 @@
#include <env.h>
#include <common.h>
#include <mpc8xx.h>
+#include <asm/cpm_8xx.h>
#include <asm/io.h>
#include <dm.h>
#include <stdio.h>
@@ -451,6 +452,9 @@ void iop_setup_miae(void)
/* Wait reset on FPGA_F */
udelay(100);
+ /* Load CPM relocation code */
+ cpm_load_patch(cp);
+
/* Set the front panel LED color to red */
clrbits_8((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x44, 0x02);
@@ -10,6 +10,8 @@ CONFIG_MPC8xx=y
# CONFIG_PCI is not set
CONFIG_TARGET_CMPC885=y
CONFIG_MPC885=y
+CONFIG_SMC_UCODE_PATCH=y
+CONFIG_SMC2_RPBASE=0x1fc0
CONFIG_CMD_IMMAP=y
CONFIG_SYS_SIUMCR=0x00620000
CONFIG_SYS_TBSCR=0x00C3
When CMPC885 board is used for MIAE device, SCC2 SCC3 and SMC2 are used for serial lines. Therefore only SCC4 is available for handling the TDM line. In order to use SCC4 in QMC mode without loosing SMC2, SMC2 must be relocated. Activate SMC relocation and relocate SMC2 at offset 0x1fc0 which is unused. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- board/cssi/cmpc885/cmpc885.c | 4 ++++ configs/CMPC885_defconfig | 2 ++ 2 files changed, 6 insertions(+)