| [U-Boot,v8,1/4] usb: hub: make minimum power-on delay configurable |
2013-05-14 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,4/4] mpc8323erdb: Update crc32 check of MAC |
2013-05-13 |
Tom Rini |
wd |
Changes Requested |
| [U-Boot,3/4] ELPPC: Don't write magic numbers via short. |
2013-05-13 |
Tom Rini |
wd |
Superseded |
| [U-Boot,2/4] mpc8xx: Correct cast of im_cpm.cp_dparam |
2013-05-13 |
Tom Rini |
wd |
Changes Requested |
| [U-Boot,1/4] powerpc: Correct im_dprambase cast |
2013-05-13 |
Tom Rini |
wd |
Changes Requested |
| [U-Boot,PATCHv3,6/6] am335x: enable falcon boot mode for mmc (raw and fat) and nand |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,PATCHv3,5/6] spl_mmc: add Falcon mode support for raw variant |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,PATCHv3,4/6] spl_mmc: mmc_load_image_raw(): Add sector argument |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,PATCHv3,3/6] spl_mmc: add Falcon mode support for FAT variant |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,PATCHv3,2/6] spl_mmc: mmc_load_image_fat(): Add filename argument and move fat init out |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,PATCHv3,1/6] spl_mmc: return error from mmc_load_image_{raw, fat} rather than hanging |
2013-05-13 |
Peter Korsgaard |
trini |
Accepted |
| [U-Boot,v2,7/7] am335x_evm: Add support to boot from NOR. |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,6/7] am335x_evm: Add support for the NOR module on the memory cape |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,5/7] am335x_evm: Rework board_is_foo() checks |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,3/7] am335x_evm: Update SPI_BOOT support, add MTDPARTS info |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,2/7] am335x_evm: Drop useless CONFIG_ENV_IS_NOWHERE |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v2,1/7] am33xx/omap3: Clean up gpmc_init slightly |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v02,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-13 |
Andrii Tseglytskyi |
trini |
Changes Requested |
| [U-Boot,v02,1/2] OMAP3+: introduce generic ABB support |
2013-05-13 |
Andrii Tseglytskyi |
trini |
Changes Requested |
| [U-Boot,v1,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-13 |
Andrii Tseglytskyi |
trini |
Superseded |
| [U-Boot,v1,1/2] OMAP3+: introduce generic ABB support |
2013-05-13 |
Andrii Tseglytskyi |
trini |
Superseded |
| [U-Boot,2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. |
2013-05-13 |
SARTRE Leo |
sbabic |
Changes Requested |
| [U-Boot] Add minimal support for Congatec Conga-QEVAl Evaluation Carrier Board with a conga-Qmx6 module. |
2013-05-13 |
SARTRE Leo |
sbabic |
Changes Requested |
| [U-Boot,2/2] usb: gadget: Use unaligned access for wMaxPacketSize |
2013-05-13 |
Vivek Gautam |
marex |
Awaiting Upstream |
| [U-Boot,1/2] usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSize |
2013-05-13 |
Vivek Gautam |
marex |
Awaiting Upstream |
| [U-Boot,3/3] ARM: at91: add NAND partition table and index |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot,2/3] ARM: at91: add at91sam9x5 and sama5d3x information |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot,1/3] ARM: at91: fix and update README.at91 document |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot] Makefile: move the common makefile line out of the CONFIG_SPL_BUILD ifdef |
2013-05-13 |
ying.zhang@freescale.com |
trini |
Superseded |
| [U-Boot,3/3] ARM: atmel: add sama5d3xek support |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot,2/3] USB: ohci-at91: support sama5d3x devices |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot,1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register |
2013-05-13 |
Bo Shen |
abiessmann |
Awaiting Upstream |
| [U-Boot,PULL] please pull u-boot-avr32/master |
2013-05-13 |
Andreas Bießmann |
trini |
Accepted |
| [U-Boot,v7,4/4] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v7,3/4] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v7,2/4] usb: ehci: add weak-aliased function for PORTSC |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v7,1/4] usb: hub: make minimum power-on delay configurable |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,RFC] arm: lds: Remove libgcc eabi exception handling tables |
2013-05-13 |
Michal Simek |
aaribaud |
Not Applicable |
| [U-Boot,v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT |
2013-05-13 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot] mmc: fix env in mmc with redundant compile error |
2013-05-13 |
Bo Shen |
trini |
Superseded |
| [U-Boot,4/4,v2] Exynos5: config: enable cpu freq |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,3/4,v2] smdk5250: enable support for tmu throttling |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/4,v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,1/4,v2] PMIC: max77686: add pmic_set_voltage api for max77686 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,v1,3/3] blackfin: Uart divisor should be set after their values are generated. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v1,2/3] blackfin: Add memory virtual console to blackfin serial driver. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v1,1/3] blackfin: Enable early print via the generic serial API. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot] .gitignore: add GNU GLOBAL files |
2013-05-13 |
Masahiro Yamada |
trini |
Accepted |
| [U-Boot,RFC,7/7] Switch over to Kbuild |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,6/7] Enable Kconfig for U-Boot |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,5/7] Adjust Kconfig scripts for use by U-Boot |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,4/7] Add Kconfig scripts and related material |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,3/7] Tidy up Makefiles to use COBJS consistently |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,2/7] arm: Allow start.o to come from any directory |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,RFC,1/7] Add some required Kconfig files |
2013-05-13 |
Simon Glass |
trini |
RFC |
| [U-Boot,v6,4/4] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v6,3/4] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v6,2/4] usb: ehci: add weak-aliased functions to portsc & tdi |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot,v6,1/4] usb: hub: make minimum power-on delay configurable |
2013-05-13 |
Kuo-Jung Su |
marex |
Superseded |
| [U-Boot] wandboard: fix typo in README |
2013-05-13 |
Luka Perkov |
sbabic |
Awaiting Upstream |
| [U-Boot,PULL] please pull u-boot-atmel/master |
2013-05-12 |
Andreas Bießmann |
aaribaud |
Accepted |
| [U-Boot] usb: asix: Move software resets to basic_init |
2013-05-11 |
Simon Glass |
marex |
Awaiting Upstream |
| [U-Boot] Pull request: u-boot-blackfin |
2013-05-11 |
Sonic Zhang |
trini |
Changes Requested |
| [U-Boot,v2] EXYNOS: SPL: Add a custom spi copy function |
2013-05-11 |
Simon Glass |
prom |
New |
| [U-Boot,v2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-11 |
Simon Glass |
jagan |
Superseded |
| [U-Boot] Revert wrong removal of nand_init and nand_deselect |
2013-05-11 |
Albert ARIBAUD |
aaribaud |
Accepted |
| [U-Boot,2/2] Power: remove support for Freescale MPC8220 |
2013-05-11 |
Wolfgang Denk |
trini |
Accepted |
| [U-Boot,1/2] doc/README.scrapyard: add missing commit IDs |
2013-05-11 |
Wolfgang Denk |
trini |
Accepted |
| [U-Boot,v2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-11 |
Dirk Behme |
prom |
New |
| [U-Boot] exynos: Enable mmc for snow |
2013-05-11 |
Simon Glass |
prom |
New |
| [U-Boot] Tegra: clk: always use find_best_divider() for periph clocks |
2013-05-11 |
Allen Martin |
tomcwarren |
Accepted |
| [U-Boot,3/3] usb: Correct CLEAR_FEATURE code in ehci-hcd |
2013-05-11 |
Simon Glass |
marex |
Awaiting Upstream |
| [U-Boot,2/3] usb: workaround non-working keyboards. |
2013-05-11 |
Simon Glass |
marex |
Awaiting Upstream |
| [U-Boot,1/3] usb: properly re-initialize the USB keyboard. |
2013-05-11 |
Simon Glass |
marex |
Awaiting Upstream |
| [U-Boot] Pull request: u-boot-fdt |
2013-05-10 |
Jerry Van Baren |
trini |
Accepted |
| [U-Boot,4/4] arm: factorize relocate_code routine |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
Superseded |
| [U-Boot,3/4] arm: make relocation section symbols compiler-generated |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
Superseded |
| [U-Boot,2/4] arm: make __image_copy_{start, end} compiler-generated |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
Superseded |
| [U-Boot,1/4] Rename arch/arm/lib/bss.c to sections.c |
2013-05-10 |
Albert ARIBAUD |
aaribaud |
Superseded |
| [U-Boot,03/21] fsl_ifc: add support for different IFC bank count |
2013-05-10 |
Andy Fleming |
afleming |
Changes Requested |
| [U-Boot,v2] Please pull u-boot-mpc85xx.git |
2013-05-10 |
Andy Fleming |
trini |
Changes Requested |
| [U-Boot,3/3] video: mxsfb: Add an entry for mx23evk/mx28vk video modes |
2013-05-10 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/3] mx23evk: Add splash screen support |
2013-05-10 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,1/3] mx28evk: Add splash screen support |
2013-05-10 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,RFC] ARM: byteorder: add optimized swab16 and swab32 |
2013-05-10 |
Dirk Behme |
aaribaud |
Rejected |
| [U-Boot,v2] at91sam9260ek: move board id setup to config header |
2013-05-10 |
Andreas Bießmann |
abiessmann |
Accepted |
| [U-Boot] Please pull u-boot-ti/master |
2013-05-10 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT |
2013-05-10 |
ying.zhang@freescale.com |
wd |
Changes Requested |
| [U-Boot] powerpc/mpc85xx: support application without resetvec segment in the linker script |
2013-05-10 |
ying.zhang@freescale.com |
afleming |
Superseded |
| [U-Boot] drivers/mmc: move spl_mmc.c to common/spl |
2013-05-10 |
ying.zhang@freescale.com |
trini |
Accepted |
| [U-Boot,v2] arm: fix a comment |
2013-05-10 |
Masahiro Yamada |
aaribaud |
Superseded |
| [U-Boot] Please pull u-boot-mpc85xx.git |
2013-05-09 |
Andy Fleming |
trini |
Changes Requested |
| [U-Boot,v3] at91sam9x5ek: Pass serial and revision tags to Linux |
2013-05-09 |
Julius Hemanth P |
abiessmann |
Not Applicable |
| [U-Boot,v3] at91sam9x5ek:Pass serial and revision tags to Linux |
2013-05-09 |
Julius Hemanth P |
|
Deferred |
| [U-Boot,RFC] arm: lds: Remove libgcc eabi exception handling tables |
2013-05-09 |
Michal Simek |
aaribaud |
RFC |
