| [U-Boot,06/10,V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 |
2012-07-02 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,06/10,V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 |
2012-07-04 |
Rajeshwari Shinde |
prom |
Accepted |
| [U-Boot,06/10,v2] net: natsemi: Add initialized eth_device structure |
2010-10-19 |
Nobuhiro Iwamatsu |
|
Accepted |
| [U-Boot,06/10] ARM: highbank: avoid bss write in timer_init |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,06/10] ARM: remove broken "impa7" board. |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,06/10] Enable unique mode registers and dynamic ODT for DDR3 |
2010-12-09 |
York Sun |
galak |
Changes Requested |
| [U-Boot,06/10] GCC4.6: Squash warnings in pmc405de.c |
2011-10-25 |
Marek Vasut |
|
Accepted |
| [U-Boot,06/10] MIPS: qemu-malta: add PCI support |
2013-01-23 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,06/10] NET: phy: add 88E1310 PHY initialization |
2012-12-02 |
Sebastian Hesselbarth |
prafulla@marvell.com |
Superseded |
| [U-Boot,06/10] am33xx: add dmm support to emif4 library |
2013-02-13 |
Matt Porter |
trini |
Deferred |
| [U-Boot,06/10] common/lcd.c: remove global lcd_base |
2013-01-12 |
Jeroen Hofstee |
ag |
Superseded |
| [U-Boot,06/10] dfu: Fix crash when wrong number of arguments given |
2012-11-29 |
Pantelis Antoniou |
marex |
Superseded |
| [U-Boot,06/10] dm: Move OMAP GPIO driver to drivers/gpio/ |
2012-07-21 |
Marek Vasut |
trini |
Accepted |
| [U-Boot,06/10] drivers/net/cs8900.c: Fix GCC 4.6 warning |
2011-11-19 |
Anatolij Gustschin |
|
Accepted |
| [U-Boot,06/10] efikamx: Remove unused SOBJS |
2012-05-29 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,06/10] km/common: remove saveenv from do_checkboardidhwkey |
2011-06-06 |
Holger Brunck |
|
Accepted |
| [U-Boot,06/10] make ide_led() a weak alias |
2012-10-07 |
Pavel Herrmann |
trini |
Accepted |
| [U-Boot,06/10] microblaze: Copy bootfile from variables |
2011-08-31 |
Michal Simek |
|
Changes Requested |
| [U-Boot,06/10] mx23_olinuxino: Add support for status LED |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,06/10] mx5 clocks: Fix get_ipg_per_clk() |
2012-08-14 |
Benoît Thébaudeau |
sbabic |
Superseded |
| [U-Boot,06/10] powerpc/mpc85xx: Extend workaround for erratum DDR_A003 to other SoCs |
2013-03-22 |
York Sun |
|
Superseded |
| [U-Boot,06/10] pxe: always display a menu when present |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,06/11,v2] snowball: applying power to LAN and GBF controllers |
2012-06-19 |
mathieu.poirier@linaro.org |
trini |
Accepted |
| [U-Boot,06/11,v3] Exynos: Tidy up the pwm_config function in the exynos pwm driver |
2013-03-28 |
Akshay Saraswat |
prom |
Accepted |
| [U-Boot,06/11] Blackfin: bf60x: add gpio support |
2013-02-07 |
Sonic Zhang |
trini |
Superseded |
| [U-Boot,06/11] DM: add cmd_block command |
2012-09-20 |
Pavel Herrmann |
marex |
Superseded |
| [U-Boot,06/11] FEC: Abstract access to fec->eth in MII operations |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,06/11] FEC: Abstract access to fec->eth in MII operations |
2011-09-08 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,06/11] MIPS: make cache operation mode configurable in dcache_enable() |
2011-11-24 |
Daniel Schwierzeck |
marex |
Accepted |
| [U-Boot,06/11] MX5: mx51evk: use new pmic driver |
2011-10-08 |
Stefano Babic |
|
Changes Requested |
| [U-Boot,06/11] arm: cm4008, cm41xx: Fix ROM relocation |
2012-08-09 |
Yann Vernier |
aaribaud |
Not Applicable |
| [U-Boot,06/11] arm: cm4008, cm41xx: Fix ROM relocation |
2012-10-05 |
Yann Vernier |
aaribaud |
Changes Requested |
| [U-Boot,06/11] edminiv2: add I2C support using mvtwsi driver |
2011-03-18 |
Rogan Dawes |
|
Changes Requested |
| [U-Boot,06/11] i2c: add FTI2C010 I2C controller support |
2013-03-29 |
Kuo-Jung Su |
aaribaud |
Superseded |
| [U-Boot,06/11] imximage: add plugin commands |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,06/11] powerpc/85xx: Add is_serdes_configured() support for MPC8548 SERDES |
2010-12-17 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,06/11] snowball: applying power to LAN and GBF controllers |
2012-06-18 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,06/11] snowball: applying power to LAN and GBF controllers |
2012-07-31 |
mathieu.poirier@linaro.org |
trini |
Accepted |
| [U-Boot,06/11] snowball: applying power to LAN and GBF controllers |
2012-06-18 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,06/11] st_smi: Read status until timeout happens |
2012-02-24 |
Amit Virdi |
stroese |
Accepted |
| [U-Boot,06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux |
2013-01-24 |
Lucas Stach |
tomcwarren |
Deferred |
| [U-Boot,06/12] ARM: rpi_b: set bi_boot_params |
2012-07-04 |
Stephen Warren |
trini |
Changes Requested |
| [U-Boot,06/12] Davinci: ea20: add gpio for keeping power on in board_late_init |
2011-10-05 |
Stefano Babic |
spaulraj |
Accepted |
| [U-Boot,06/12] OMAP3: Suffix all Micron memory timing parts with their speed |
2011-11-07 |
Tom Rini |
|
Superseded |
| [U-Boot,06/12] board/cm4008/flash.c: Fix GCC 4.6 warnings |
2011-11-15 |
Anatolij Gustschin |
|
Accepted |
| [U-Boot,06/12] cmd_sf: Add QPP(Quad-input Page Program) write instruction support |
2012-12-31 |
Jagannadha Sutradharudu Teki |
vapier |
New |
| [U-Boot,06/12] da850: add support to wake up DSP during board init |
2011-08-02 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,06/12] env: Make the "silent" env var take effect immediately |
2012-08-17 |
Joe Hershberger |
trini |
Changes Requested |
| [U-Boot,06/12] imx: iomux-v3: Add iomux-mx53.h |
2013-05-02 |
Benoît Thébaudeau |
sbabic |
Superseded |
| [U-Boot,06/12] microblaze: intc: Add device-tree driver configuration |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,06/12] sparc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,06/13] BeagleBoard: config: enable networking |
2011-08-16 |
Joel Fernandes |
spaulraj |
Accepted |
| [U-Boot,06/13] Blackfin: Bf609-ezkit: implement soft switch |
2012-08-21 |
Bob Liu |
vapier |
Superseded |
| [U-Boot,06/13] EXYNOS5: Add device node for FIMD |
2013-02-22 |
Ajay Kumar |
prom |
Accepted |
| [U-Boot,06/13] PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE |
2010-12-02 |
Becky Bruce |
galak |
Superseded |
| [U-Boot,06/13] S3C64xx: mov cpu_init.S to the board directory |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings. |
2011-12-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,06/13] board/evb64260/sdram_init.c: Fix GCC 4.6 build warnings |
2011-11-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,06/13] davinci_emac: hardcode 100Mbps for AM35xx and RMII |
2011-11-11 |
Ilya Yanok |
|
Superseded |
| [U-Boot,06/13] ehci-mx5: Fix *PM usage for i.MX53 |
2012-11-05 |
Benoît Thébaudeau |
sbabic |
Changes Requested |
| [U-Boot,06/13] i.MX28: Add LCDIF register definitions |
2012-05-01 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,06/13] i.MX28: Add LCDIF register definitions |
2012-05-01 |
Marek Vasut |
marex |
Accepted |
| [U-Boot,06/13] mxc nand: Access all ecc_status_result fields |
2012-08-13 |
Benoît Thébaudeau |
scottwood |
Accepted |
| [U-Boot,06/13] mxs: Make ehci-mxs multiport capable |
2013-02-23 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,06/13] sh: Remove config.mk for sh7763rdp board |
2011-01-17 |
Nobuhiro Iwamatsu |
|
Accepted |
| [U-Boot,06/13] update/fix AcTux1 board |
2010-12-28 |
Michael Schwingen |
|
Superseded |
| [U-Boot,06/14] CMD: Drop CONFIG_CMD_EMMC, it's not used |
2012-03-31 |
Marek Vasut |
|
Accepted |
| [U-Boot,06/14] DB64460: Fix GCC 4.6 build warnings |
2011-11-30 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,06/14] MX31: QONG: make use of GPIO framework |
2011-08-21 |
Stefano Babic |
|
Accepted |
| [U-Boot,06/14] S3C64xx: mov cpu_init.S to the board directory |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,06/14] cfb_console: Add function console_clear and console_clear_line |
2012-01-24 |
Pali Rohár |
ag |
Superseded |
| [U-Boot,06/14] davinci_emac: hardcode 100Mbps for AM35xx and RMII |
2011-11-01 |
Ilya Yanok |
spaulraj |
Superseded |
| [U-Boot,06/14] dm: Add SPI API transition document |
2012-08-08 |
Marek Vasut |
|
Accepted |
| [U-Boot,06/14] net: gem: Do not initialize BDs again |
2013-04-22 |
Michal Simek |
trini |
Changes Requested |
| [U-Boot,06/14] sf: winbond: add W25Q32DW |
2013-02-13 |
Allen Martin |
tomcwarren |
Superseded |
| [U-Boot,06/15] AT91: fix related arch-at91 header files |
2011-02-18 |
Reinhard Meyer |
reinhardm |
Accepted |
| [U-Boot,06/15] atstk1004: fix "#define XXXX 1" |
2011-02-09 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,06/15] iMX28: Add GPIO control |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,06/15] powerpc/83xx: use ppc_6xx as arch variable for kmvect1 |
2013-01-17 |
Holger Brunck |
kimphill |
Superseded |
| [U-Boot,06/15] powerpc/86xx: Rework MPC8641HPCN pci_init_board to use common FSL PCIe code |
2010-12-17 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,06/16,V2] SMDK5250: Initialise I2C using FDT |
2012-12-27 |
Rajeshwari Shinde |
prom |
Accepted |
| [U-Boot,06/16] Blackfin: Bf609-ezkit: implement soft switch |
2012-08-07 |
Bob Liu |
vapier |
Superseded |
| [U-Boot,06/16] SMDK5250: Initialise I2C using FDT |
2012-12-14 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,06/16] board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning |
2011-11-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,06/16] drivers/video/cfb_console.c: Fix function console_scrollup |
2011-12-17 |
Pali Rohár |
|
Changes Requested |
| [U-Boot,06/16] pmic: Enable power_board_init() support at TRATS |
2012-09-14 |
Łukasz Majewski |
prom |
Superseded |
| [U-Boot,06/17,RESEND] iMX28: Add GPIO control |
2011-10-21 |
Marek Vasut |
|
Superseded |
| [U-Boot,06/17] ARM: SPL: Rename omap_boot_mode to spl_boot_mode() |
2012-08-15 |
Tom Rini |
trini |
Superseded |
| [U-Boot,06/17] OMAP5: hwinit: Add the missing break statement |
2012-02-17 |
SRICHARAN R |
trini |
Accepted |
| [U-Boot,06/17] am33xx: Bugfix to config_sdram() |
2012-07-30 |
Tom Rini |
trini |
Accepted |
| [U-Boot,06/17] env: clean env_nowhere.c checkpatch and code style |
2011-11-07 |
Igor Grinberg |
sbabic |
Accepted |
| [U-Boot,06/17] support CONFIG_SYS_LDSCRIPT on ARM |
2011-02-04 |
Michael Schwingen |
|
Superseded |
| [U-Boot,06/17] x86: Rework relocation calcuations |
2012-01-02 |
Graeme Russ |
|
Accepted |
| [U-Boot,06/18,V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c |
2011-12-15 |
Marek Vasut |
stroese |
Accepted |
| [U-Boot,06/18] Blackfin: uart: fix printf warning |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,06/18] CHECKPATCH: ./board/esd/ash405/fpgadata.c |
2011-12-13 |
Marek Vasut |
|
Superseded |
| [U-Boot,06/18] GCC4.6: Squash warnings in fsl_espi.c |
2011-10-25 |
Marek Vasut |
|
Accepted |
| [U-Boot,06/18] mx23: Add POWER and CLKCTRL register definitions |
2013-01-11 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,06/19] PXA: Enable command line editing for vpac270 |
2011-11-26 |
Marek Vasut |
marex |
Accepted |