Show patches with: Archived = No       |   167417 patches
« 1 2 ... 237 238 239 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,1/2] sunxi: Request card detect gpio 1 - - - --- 2014-10-31 Hans de Goede ijc Accepted
[U-Boot] sunxi: Ippo_q8h_v5: fix config name typo - - - - --- 2014-10-30 Albert ARIBAUD ijc Not Applicable
[U-Boot,v2] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set - - - - --- 2014-10-24 Hans de Goede ijc Accepted
[U-Boot,2/2] ARM: bootm: Allow booting in secure mode on hyp capable systems 2 - - - --- 2014-10-24 Hans de Goede ijc Superseded
[U-Boot,1/2] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options - - - - --- 2014-10-24 Hans de Goede ijc Superseded
[U-Boot] sun7i: Drop CONFIG_ARMV7_PSCI_NR_CPUS 1 - - - --- 2014-10-24 Hans de Goede ijc Accepted
[U-Boot,v3] ARM: bootm: Allow booting in secure mode on hyp capable systems 2 - - - --- 2014-10-23 Hans de Goede ijc Superseded
[U-Boot] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set - - - - --- 2014-10-22 Hans de Goede ijc Superseded
[U-Boot,3/3] sunxi: Add CONFIG_OLD_KERNEL_COMPAT Kconfig option - - - - --- 2014-10-22 Hans de Goede ijc Accepted
[U-Boot,2/3] sunxi: dram: Use clock_get_pll5p to calculate mbus, rather then hardcoding 1 - - - --- 2014-10-22 Hans de Goede ijc Accepted
[U-Boot,1/3] sunxi: Add clock_get_pll5p() function 1 - - - --- 2014-10-22 Hans de Goede ijc Accepted
[U-Boot,v2,8/8] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,7/8] ARM: sunxi: Add support for using R_UART as console 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,6/8] ARM: sunxi: Allow specifying module in prcm apb0 init function 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,5/8] ARM: sunxi: Add support for R_PIO gpio banks 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,4/8] ARM: sunxi: Add basic A23 support 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,3/8] mmc: sunxi: Add support for sun8i (A23) 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,2/8] ARM: sunxi: Add support for uart0 on port F (mmc0) 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v2,1/8] ARM: sunxi: Add sun8i (A23) UART0 pin mux support 1 - - - --- 2014-10-22 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,6/6] sunxi: Kconfig: Unify sunxi Kconfig code - - - - --- 2014-10-21 Ian Campbell ijc Accepted
[U-Boot] ARM: bootm: Allow booting in secure mode on hyp capable systems 2 - - - --- 2014-10-15 Hans de Goede ijc Superseded
[U-Boot] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - - --- 2014-10-07 Ian Campbell ijc Superseded
[U-Boot] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - - --- 2014-10-07 Ian Campbell ijc Accepted
[U-Boot,3/3] ARM: sunxi: Fix reset command on sun6i/sun8i - - - - --- 2014-10-04 Chen-Yu Tsai ijc Accepted
[U-Boot,2/3] ARM: sunxi: Add sun6i/sun8i timer block register definition 1 - - - --- 2014-10-04 Chen-Yu Tsai ijc Accepted
[U-Boot,1/3] ARM: sunxi: Move watchdog register definitions to separate file 1 - - - --- 2014-10-04 Chen-Yu Tsai ijc Accepted
[U-Boot,for-next,3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option 1 - - - --- 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,for-next,2/3] sunxi: kconfig: Add top-level TARGET_SUNXI 1 - - - --- 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,for-next,1/3] sunxi: Kconfig: Consolidate SYS_CONFIG_NAME settings 1 - - - --- 2014-10-04 Ian Campbell ijc Superseded
[U-Boot,for-next,0/3] sunxi: Kconfig consolidation and cleanup - - - - --- 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,6/6] sunxi: Enable second sdcard slot found on some boards - - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1 2 - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting - - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,3/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option - - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,2/6] sunxi: Add mmc card-detect functionality - - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,1/6] sunxi: Add sunxi_gpio_get_val function - - - - --- 2014-10-03 Hans de Goede ijc Superseded
[U-Boot,v3,10/10] ARM: sun6i: Add Colombus board defconfig 2 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,09/10] ARM: sunxi: Add basic A31 support 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,08/10] ARM: sun6i: Setup the A31 UART0 muxing 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,07/10] ARM: sun6i: Define UART0 pins for A31 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,05/10] ARM: sun6i: Add clock support 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,04/10] ARM: sun6i: Add support for the power reset control module found on the A31 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,03/10] ARM: sun6i: Add base address for the new controllers in A31 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,02/10] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot,v3,01/10] ARM: sunxi: Use macro values for setting UART GPIO pull-ups 1 - - - --- 2014-10-03 Chen-Yu Tsai ijc Accepted
[U-Boot] sunxi: Fix gmac not working reliable on the Bananapi 1 - - 2 --- 2014-09-28 Hans de Goede ijc Superseded
[U-Boot] Generic bootcmd handling: Missing 'scsi scan' - - - - --- 2014-09-16 Hans de Goede ijc Not Applicable
[U-Boot] Generic bootcmd handling: Missing 'scsi scan' - - - - --- 2014-09-15 Hans de Goede ijc Not Applicable
[U-Boot,7/7] ARM: sunxi: Add basic A31 support - - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,6/7] ARM: sun6i: Setup the A31 UART0 muxing 1 - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31 - - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,4/7] ARM: sun6i: Add clock support - - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,3/7] ARM: sun6i: Add support for the new power control module found on the A31 - - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,2/7] ARM: sun6i: Add base address for the new controllers in A31 1 - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined 1 - - - --- 2014-09-08 Chen-Yu Tsai ijc Superseded
[U-Boot,v2] sun7i: Add support for Olimex A20-OLinuXino-LIME - - - - --- 2014-09-02 FUKAUMI Naoki ijc Accepted
[U-Boot] kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS 1 - - - --- 2014-08-31 Masahiro Yamada ijc Accepted
[U-Boot,v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE 1 - - - --- 2014-08-31 Ian Campbell ijc Accepted
[U-Boot] Please pull u-boot-sunxi.git/master - - - - --- 2014-08-28 Hans de Goede ijc Deferred
[U-Boot] sun7i: Add support for Olimex A20-OLinuXino-LIME - - - - --- 2014-08-20 FUKAUMI Naoki ijc Changes Requested
[U-Boot,RFC/PATCH,1/1] sunxi: Populate the default environment for sunxi-based systems - - - - --- 2014-08-10 Karsten Merker ijc Superseded
[U-Boot] sunxi: make mksunxiboot available to tools-only builds 1 - - - --- 2014-07-28 Ian Campbell ijc Rejected
[U-Boot,v3,2/5] sunxi: add USB EHCI driver - - - - --- 2014-07-24 Roman Byshko ijc Superseded
[U-Boot] board_r: Add missing return to initr_doc 1 - - - --- 2014-07-21 Ian Campbell ijc Changes Requested
[U-Boot,3/3] ahci: provide sunxi SATA driver using AHCI platform framework 1 - - - --- 2014-07-18 Ian Campbell ijc Accepted
[U-Boot,2/2] sunxi: Set the AUXCR L2EN bit for sun4i/sun5i in FEL boot mode 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,1/2] sunxi: Use Thumb2 and move stack to gain more SRAM space in FEL mode 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,14/14] sunxi: dram: Autodetect DDR3 bus width and density 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,13/14] sunxi: dram: Derive write recovery delay from DRAM clock speed 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,12/14] sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,11/14] sunxi: dram: Support sun4i (Allwinner A10) and sun5i (Allwinner A13) - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,10/14] sunxi: dram: Configurable DQS gating window mode and delay - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,09/14] sunxi: dram: Add a helper function 'mctl_get_number_of_lanes' - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,08/14] sunxi: dram: Improve DQS gate data training error handling 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,07/14] sunxi: dram: Use divisor P=1 for PLL5 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,06/14] sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6) - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,05/14] sunxi: dram: Code cleanup for the impedance calibration - - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,04/14] sunxi: dram: Code cleanup and comments for the CKE delay handling 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,03/14] sunxi: dram: Respect the DDR3 reset timing requirements 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,02/14] sunxi: dram: Remove broken super-standby remnants 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,01/14] sunxi: dram: Remove useless 'dramc_scan_dll_para()' function 1 - - - --- 2014-07-18 Siarhei Siamashka ijc Changes Requested
[U-Boot,v2,5/5] sun7i: cubietruck: enable USB EHCI 1 - - - --- 2014-07-15 Roman Byshko ijc Changes Requested
[U-Boot,v2,4/5] sun7i: add USB EHCI configuration 1 - - - --- 2014-07-15 Roman Byshko ijc Changes Requested
[U-Boot,v2,3/5] sunxi: add USB options to configs 1 - - - --- 2014-07-15 Roman Byshko ijc Changes Requested
[U-Boot,v2,2/5] sunxi: add USB EHCI driver - - - - --- 2014-07-15 Roman Byshko ijc Changes Requested
[U-Boot,v2,1/5] sunxi: add defines to control USB Host clocks/resets 1 - - - --- 2014-07-15 Roman Byshko ijc Changes Requested
[U-Boot,5/5] sun7i: cubietruck: enable USB EHCI - - - - --- 2014-07-08 Roman Byshko ijc Superseded
[U-Boot,4/5] sun7i: add USB EHCI configuration - - - - --- 2014-07-08 Roman Byshko ijc Superseded
[U-Boot,3/5] sunxi: add USB options to configs - - - - --- 2014-07-08 Roman Byshko ijc Superseded
[U-Boot,2/5] sunxi: add USB EHCI driver - - - - --- 2014-07-08 Roman Byshko ijc Superseded
[U-Boot,1/5] sunxi: add defines to control USB Host clocks/resets - - - - --- 2014-07-08 Roman Byshko ijc Superseded
[U-Boot,v3,00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements 1 - - - --- 2014-07-07 Ian Campbell ijc Accepted
[U-Boot] sunxi: use random parts of SID to set ethaddr 2 - - - --- 2014-06-14 Hans de Goede ijc Accepted
[U-Boot,v2,5/5] sunxi: Fix reset hang on sun5i 1 - - - --- 2014-06-13 Hans de Goede ijc Accepted
[U-Boot,v2,4/5] sunxi: Add axp152 pmic support 1 - - - --- 2014-06-13 Hans de Goede ijc Accepted
[U-Boot,v2,3/5] sunxi: Add axp209 pmic support 1 - - - --- 2014-06-13 Hans de Goede ijc Accepted
[U-Boot,v2,2/5] sunxi: Add i2c support 3 - - - --- 2014-06-13 Hans de Goede ijc Accepted
[U-Boot,v2,1/5] mvtwsi: convert to CONFIG_SYS_I2C framework 1 - - - --- 2014-06-13 Hans de Goede ijc Accepted
[U-Boot,5/5] sunxi: Fix reset hang on sun5i 1 - - - --- 2014-06-09 Hans de Goede ijc Superseded
« 1 2 ... 237 238 239 … 1674 1675 »