Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 ... 211 212 213 214 215 216 217 218 219 ... 324 325 Next »
Filters: Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,01/24] mxc_i2c: fix i2c_imx_stop 2 0 0 2012-06-22 Troy Kisky hs Accepted
[U-Boot,v4,13/13] tegra20: Remove armv4t build flags 1 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,12/13] tegra20: enable SPL for tegra20 boards 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,11/13] tegra20: move SDRAM param save to later in boot 0 0 0 2012-06-22 Allen Martin Accepted
[U-Boot,v4,10/13] tegra20: add u-boot-t2.bin target 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,09/13] ARM: add tegra20 support to arm720t 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,08/13] tegra20: remove timer_init from SPL build 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,07/13] ARM: Fix arm720t SPL build 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,06/13] mkconfig: add support for SPL CPU 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,05/13] tegra20: plutux: change obj directory mkdir commands 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,04/13] tegra20: tec: add tegra20-common-post.h 1 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,03/13] tegra20: rename CONFIG_MACH_TEGRA_GENERIC 0 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,02/13] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common 1 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,v4,01/13] tegra20: rename tegra2 -> tegra20 1 0 0 2012-06-22 Allen Martin Superseded
[U-Boot,1/1] net: phy: micrel: make ksz9021 phy accessible 1 0 0 2012-06-21 Troy Kisky Accepted
[U-Boot,2/2] microblaze: Enable ubi support 0 0 0 2012-06-21 Stephan Linz monstr Changes Requested
[U-Boot,1/2] microblaze: avoid compile error on systems without cfi flash 0 0 0 2012-06-21 Stephan Linz monstr Changes Requested
[U-Boot,1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state 0 0 0 2012-06-21 Tero Kristo trini Not Applicable
[U-Boot,1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state 1 0 0 2012-06-21 Roger Quadros trini Rejected
[U-Boot,v3,9/9] da850/omap-l138: add support for direct NOR boot mode 0 0 0 2012-06-21 Prabhakar Lad trini Accepted
[U-Boot,v3,8/9] da850/omap-l138: Add support for NAND SPL 0 0 0 2012-06-21 Prabhakar Lad trini Accepted
[U-Boot,v3,7/9] da850/omap-l138: Fix NAND flash timings 0 0 0 2012-06-21 Prabhakar Lad trini Superseded
[U-Boot,v3,6/9] da850/omap-l138: Add support to read u-boot image from MMC/SD 0 0 0 2012-06-21 Prabhakar Lad trini Superseded
[U-Boot,v3,5/9] da850/omap-l138: Define SPI specific configs for SPL only when SPI is used 0 0 0 2012-06-21 Prabhakar Lad trini Accepted
[U-Boot,v3,4/9] arm, davinci: perform check for initalizing global data and serial init 1 0 0 2012-06-21 Prabhakar Lad trini Accepted
[U-Boot,v3,3/9] da850/omap-l138: Make MMC and NOR support mutually exclusive 0 0 0 2012-06-21 Prabhakar Lad trini Accepted
[U-Boot,v3,2/9] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM 0 0 0 2012-06-21 Prabhakar Lad trini Changes Requested
[U-Boot,v3,1/9] da850/omap-l138: Add MMC support for DA850/OMAP-L138 0 0 0 2012-06-21 Prabhakar Lad trini Superseded
[U-Boot] Atmel : usb : add EHCI driver for Atmel SoC 0 0 0 2012-06-21 Bo Shen Superseded
[U-Boot] sh: Add support pin function control using GPIO 0 0 0 2012-06-21 Nobuhiro Iwamatsu iwamatsu Superseded
[U-Boot] sh: Add support pin function control using GPIO 0 0 0 2012-06-21 Nobuhiro Iwamatsu iwamatsu Superseded
[U-Boot,v4,1/1] tegra: usb: Fix device enumeration problem of USB1 1 0 0 2012-06-21 Jim Lin Superseded
[U-Boot,1/2] arm: rmobile: Add support Renesas SH73A0 0 0 0 2012-06-21 Nobuhiro Iwamatsu iwamatsu Superseded
[U-Boot,1/2] arm: rmobile: Add basic support for Renesas R-Mobile 0 0 0 2012-06-21 Nobuhiro Iwamatsu iwamatsu Superseded
[U-Boot] ARMv7: Add register definition of global timer 0 0 0 2012-06-21 Nobuhiro Iwamatsu aaribaud Accepted
[U-Boot,v4,6/6] tam3517-common: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Rejected
[U-Boot,v4,5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled 1 0 0 2012-06-20 Tom Rini trini Rejected
[U-Boot,v4,4/6] omap3_beagle: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Rejected
[U-Boot,v4,3/6] mcx: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Rejected
[U-Boot,v4,2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v4,1/6] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init 0 0 0 2012-06-20 Tom Rini marex Superseded
[U-Boot,v3,6/6] tam3517-common: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v3,5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v3,4/6] omap3_beagle: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v3,3/6] mcx: Disable DCACHE since USB EHCI is enabled 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v3,2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,v3,1/6] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init 0 0 0 2012-06-20 Tom Rini trini Superseded
[U-Boot,9/9,V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,6/9,V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,3/9,V2] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,2/9,V2] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-06-20 Rajeshwari Birje prom Changes Requested
[U-Boot,1/9,V2] ARCH: SPL: Add parametric board initializer 0 0 0 2012-06-20 Rajeshwari Birje prom Accepted
[U-Boot,9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,3/9] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,2/9] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-06-20 Rajeshwari Birje Accepted
[U-Boot,1/9] ARCH: SPL: Add parametric board initializer 0 0 0 2012-06-20 Rajeshwari Birje Superseded
[U-Boot,v3,1/1] tegra: usb: Fix device enumeration problem of USB1 1 0 0 2012-06-20 Jim Lin Superseded
[U-Boot] EXYNOS5: GPIO: fix wrong gpio bank offset 0 0 0 2012-06-20 Jaehoon Chung prom Not Applicable
[U-Boot] EXYNOS: PINMUX: modify the gpio function value for mmc 0 0 0 2012-06-20 Jaehoon Chung prom Changes Requested
[U-Boot,v4,2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 1 0 0 2012-06-19 Tom Rini wd Accepted
[U-Boot,v4,1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 0 0 0 2012-06-19 Tom Rini wd Accepted
[U-Boot] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register 1 0 0 2012-06-19 Fabio Estevam Accepted
[U-Boot,10/11,v2] armv7: Adding cpu specific cache managmenent 0 0 0 2012-06-19 mathieu.poirier@linaro.org trini Superseded
[U-Boot,06/11,v2] snowball: applying power to LAN and GBF controllers 0 0 0 2012-06-19 mathieu.poirier@linaro.org trini Accepted
[U-Boot,03/11,v2] snowball: Adding architecture dependent initialisation 0 0 0 2012-06-19 mathieu.poirier@linaro.org trini Superseded
[U-Boot,01/11,v2] snowball: Add support for ux500 based snowball board 0 0 0 2012-06-19 mathieu.poirier@linaro.org trini Superseded
[U-Boot,v2,1/1] tegra: usb: Fix device enumeration problem of USB1 0 0 0 2012-06-19 Jim Lin Superseded
[U-Boot,8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V4] I2C: Add support for Multi channel 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V4] I2C: Modify the I2C driver for EXYNOS5 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V4] I2C: Move struct s3c24x0_i2c to a common place. 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V4] EXYNOS: PINMUX: Add pinmux support for I2C 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V4] EXYNOS: Add I2C base address. 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V4] EXYNOS: CLK: Add i2c clock 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V3] I2C: Add support for Multi channel 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V3] I2C: Modify the I2C driver for EXYNOS5 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V3] I2C: Move struct s3c24x0_i2c to a common place. 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V3] EXYNOS: PINMUX: Add pinmux support for I2C 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,2/8,V3] EXYNOS: Add I2C base address. 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot,1/8,V3] EXYNOS: CLK: Add i2c clock 1 0 0 2012-06-19 Rajeshwari Birje hs Superseded
[U-Boot] powerpc/mpc83xx: fix copyright string in serdes.c 0 0 0 2012-06-19 Timur Tabi kimphill Accepted
[U-Boot] usb_storage: fix ehci driver max transfer size 0 0 0 2012-06-18 Stefan Herbrechtsmeier marex Superseded
[U-Boot] mx53loco: Fix build error when CONFIG_VIDEO is disabled 0 0 0 2012-06-18 Vikram Narayanan ag Superseded
[U-Boot] mx51evk: Fix build error when CONFIG_VIDEO is disabled 0 0 0 2012-06-18 Vikram Narayanan ag Superseded
[U-Boot,11/11] snowball: Adding board specific cache cleanup routine 0 0 0 2012-06-18 mathieu.poirier@linaro.org trini Superseded
[U-Boot,10/11] armv7: Adding cpu specific cache managmenent 0 0 0 2012-06-18 mathieu.poirier@linaro.org trini Superseded
[U-Boot,07/11] u8500: Moving processor-specific functions to cpu area. 0 0 0 2012-06-18 mathieu.poirier@linaro.org trini Superseded
[U-Boot,06/11] snowball: applying power to LAN and GBF controllers 0 0 0 2012-06-18 mathieu.poirier@linaro.org trini Superseded