| [U-Boot,PATCHv2,10/13] ARM Cortex A9: ifdef code calling lowlevel init |
2010-04-08 |
Rabin Vincent |
aaribaud |
Not Applicable |
| [U-Boot,PATCHv2,11/13] ux500: add SoC-specific code |
2010-04-08 |
Rabin Vincent |
aaribaud |
Not Applicable |
| [U-Boot,PATCHv2,12/13] pl01x: add support for Ux500 variant of pl011 |
2010-04-08 |
Rabin Vincent |
aaribaud |
Not Applicable |
| [U-Boot,PATCHv2,13/13] mop500: add board-specific files |
2010-04-08 |
Rabin Vincent |
aaribaud |
Not Applicable |
| [U-Boot] AT49BV322A Flash: the erase regions are in the wrong order. |
2010-04-09 |
David Wu |
stroese |
Superseded |
| [U-Boot,1/2] mpc83xx: Fix comments on map_flash_by_law1 |
2010-04-11 |
Gao Ya'nan |
kimphill |
Changes Requested |
| [U-Boot,2/2] mpc83xx: {acr, spcr, sccr}_mask take more left-shifted values |
2010-04-11 |
Gao Ya'nan |
kimphill |
Superseded |
| [U-Boot,V2] AT49BV322A Flash: the erase regions are in the wrong order. |
2010-04-13 |
David Wu |
stroese |
Not Applicable |
| [U-Boot] OpenRD: Bring PCIe endpoint out of reset |
2010-04-15 |
Tanmay Upadhyay |
|
Superseded |
| [U-Boot,1/7] nhk8815: change the order of initialization |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,2/7] drivers/misc: add stmpe2401 port extender and keypad controller |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,3/7] nhk8815.h: define we need stmpe |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,4/7] nhk8815: added keypad |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,5/7] nhk8815: start lower in RAM, so the 800x480 frame buffer fits |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,6/7] nhk8815: added lcd support |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,7/7] nhk8815: documented how to replace u-boot on flash |
2010-04-15 |
Alessandro Rubini |
aaribaud |
Not Applicable |
| [U-Boot,RFC] possible typo in atmel_lcdfb.c |
2010-04-15 |
Alexander Stein |
reinhardm |
RFC |
| [U-Boot,1/6] MX: Added Freescale Power Management Driver |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,2/6] MX: RTC13783 uses general function to access PMIC |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,3/6] MX31: Add support for PMIC to the QONG module |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,V2,4/6] SPI: added support for MX51 to mxc_spi |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,5/6] MX: Added definition file for MC13892 |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,V2,6/6] Add SPI support to mx51evk board |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,V2,2/6] MX: RTC13783 uses general function to access PMIC |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot,V3,4/6] SPI: added support for MX51 to mxc_spi |
2010-04-19 |
Stefano Babic |
|
Accepted |
| [U-Boot] OpenRD: Bring PCIe endpoint out of reset |
2010-04-20 |
Tanmay Upadhyay |
prafulla@marvell.com |
Superseded |
| [U-Boot,v3,ARM] at91: Add support for taskit AT91SAM9G20 boards |
2010-04-20 |
Achim Ehrlich |
reinhardm |
Changes Requested |
| [U-Boot,1/2] Davinci: Fixed wrong EMAC_MDIO_PHY_MASK |
2010-04-21 |
andreas.gaer@baslerweb.com |
spaulraj |
Rejected |
| [U-Boot] mmc: new legacy MMC/SPI driver |
2010-04-23 |
Mike Frysinger |
|
Superseded |
| [U-Boot] add SPI_CS_HIGH option to cf_spi.c |
2010-04-23 |
Wolfgang Wegner |
marex |
Awaiting Upstream |
| [U-Boot] add Xilinx_abort_fn to Xilinx_Spartan3_Slave_Serial_fns |
2010-04-23 |
Wolfgang Wegner |
wd |
Accepted |
| [U-Boot,RFC] add CONFIG_SPI_IDLE_VAL for cf_spi.c to allow use of spi_mmc |
2010-04-23 |
Wolfgang Wegner |
afleming |
Accepted |
| [U-Boot] OMAP3: remove unused config macros |
2010-04-29 |
Grazvydas Ignotas |
spaulraj |
Accepted |
| [U-Boot,v2] Added PCI_DEVICE_ID_PLX_9030. |
2010-05-04 |
Horst Kronstorfer |
|
Accepted |
| [U-Boot] OpenRD: Reset PCIe endpoint while boot-up through PERST# |
2010-05-04 |
Tanmay Upadhyay |
prafulla@marvell.com |
Not Applicable |
| [U-Boot] pl01x: use C structs and readl/writel |
2010-05-05 |
Rabin Vincent |
wd |
Awaiting Upstream |
| [U-Boot,v5] Save environment data to mmc. |
2010-05-07 |
Terry Lv |
|
Accepted |
| [U-Boot] s3c44b0/start.S: should clear .bss |
2010-05-10 |
Ender Dai |
prom |
Not Applicable |
| [U-Boot,4/4] Environment in MMC |
2010-05-13 |
Terry Lv |
|
Superseded |
| [U-Boot] MIPS: Add initial support for EMMA3SL/LP |
2010-05-13 |
Serge Ziryukin |
marex |
Rejected |
| [U-Boot] arm/pxa-devel: fix and cleanup of pxa_mem_setup macro |
2010-05-17 |
Mikhail Kshevetskiy |
marex |
Not Applicable |
| [U-Boot] cannot load file from ext2 partition on OMAP3 evm |
2010-06-02 |
Mickael LANOE |
spaulraj |
Changes Requested |
| [U-Boot,1/4] m68k: restore bi_enetaddr & bi_enet1addr in bd_t for bootm compatibility. |
2010-06-23 |
Philippe De Muyter |
marex |
Not Applicable |
| [U-Boot,2/4] m68k: Make m548xevb config reusable for derived boards. |
2010-06-23 |
Philippe De Muyter |
marex |
Not Applicable |
| [U-Boot,3/4] m68k/mcf547x_8x : Fix relocation errors in start.S |
2010-06-23 |
Philippe De Muyter |
jasonjin |
Rejected |
| [U-Boot,4/4] m68k: Add ME2060_config (Macq Electronique MCF5484-based board) |
2010-06-23 |
Philippe De Muyter |
jasonjin |
Changes Requested |
| [U-Boot,v3,U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board. |
2010-06-25 |
Aldo Cedillo |
spaulraj |
Changes Requested |
| [U-Boot,3/3] microblaze: generic: enable FDT support |
2010-06-25 |
Stephan Linz |
|
Superseded |
| [U-Boot] bug fix and cleanup for s3c44b0 serial driver |
2010-06-29 |
Brian Cavagnolo |
prom |
Changes Requested |
| [U-Boot,1/3] AT91: add two new header files for RTT and GPBR |
2010-07-05 |
Reinhard Meyer (-VC) |
reinhardm |
Accepted |
| [U-Boot,2/3] AT91: update cpu.c to use GPBR definitions from at91_gpbr.h |
2010-07-05 |
Reinhard Meyer (-VC) |
reinhardm |
Accepted |
| [U-Boot] Adds driver for Xilinx' xps_spi SPI controller |
2010-07-27 |
Graeme Smecher |
marex |
Deferred |
| [U-Boot] Add support for Winbond W25Q64 SPI flash |
2010-07-29 |
Graeme Smecher |
|
Accepted |
| [U-Boot] AT91: remove superfluous test in spi driver |
2010-07-30 |
Reinhard Meyer (-VC) |
reinhardm |
Accepted |
| [U-Boot,2/2] drivers/mmc/fsl_esdhc.c: reordered tests |
2010-07-31 |
Frans Meulenbroeks |
afleming |
Accepted |
| [U-Boot,1/3] avr32: Add missing asm/unaligned.h header file |
2010-08-02 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,2/3] avr32: Print unrelocated PC on exception |
2010-08-02 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,3/3] avr32: Add simple paging support |
2010-08-02 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,4/4] net: Add LL TEMAC driver to u-boot |
2010-08-02 |
Michal Simek |
|
Changes Requested |
| [U-Boot,1/2] TI: netdev: add driver for cpsw ethernet device |
2010-08-04 |
Cyril Chemparathy |
spaulraj |
Changes Requested |
| [U-Boot,2/2] TI: add tnetv107x evm board support for cpsw |
2010-08-04 |
Cyril Chemparathy |
spaulraj |
Changes Requested |
| [U-Boot] USB-CDC: add missing variable in ether.c |
2010-08-11 |
Stefano Babic |
|
Superseded |
| [U-Boot] USB-CDC: wrong ep status used |
2010-08-11 |
Stefano Babic |
|
Superseded |
| [U-Boot,v2,1/3] avr32: Print unrelocated PC on exception |
2010-08-12 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,v2,2/3] avr32: Use uncached() macro to get an address for SDRAM init |
2010-08-12 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,v2,3/3] avr32: Add simple paging support |
2010-08-12 |
Haavard Skinnemoen |
reinhardm |
Accepted |
| [U-Boot,3/3] Enable the use of Ethernet over USB (CDC) for the AT91SAM9261EK board. |
2010-08-12 |
Remy Bohmer |
reinhardm |
Deferred |
| [U-Boot] Fix M548x gcc 4.1.x detection |
2010-08-13 |
Groleo Marius |
jasonjin |
Superseded |
| [U-Boot,v2] Add mvsata support for the Sheevaplug devices |
2010-08-14 |
Gérald Kerma |
prafulla@marvell.com |
Not Applicable |
| [U-Boot,U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET. |
2010-08-16 |
Aldo Cedillo |
trini |
Deferred |
| [U-Boot] musb: Add usb support configs for DA850 |
2010-08-18 |
Ajay Kumar Gupta |
marex |
Accepted |
| [U-Boot,1/2] TI: DaVinci DA850 EVM: add information regarding DA850 in README.davinci |
2010-08-18 |
Sekhar Nori |
|
Accepted |
| [U-Boot,v3,2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel |
2010-08-18 |
Sekhar Nori |
spaulraj |
Superseded |
| [U-Boot,1/4] MX51: iomux: Added support for mxc_iomux_set_input() |
2010-08-19 |
David Jander |
sbabic |
Changes Requested |
| [U-Boot,2/4] MX51: Added missing pin definition |
2010-08-19 |
David Jander |
sbabic |
Changes Requested |
| [U-Boot,3/4] mc13982 driver: corrected/added some definitions according to latest user-manual |
2010-08-19 |
David Jander |
sbabic |
Deferred |
| [U-Boot,4/4] Added initial support for PRTLVT2-based boards. |
2010-08-19 |
David Jander |
sbabic |
Changes Requested |
| [U-Boot] coldfire m68k/mcf547x_8x : Fix relocation errors in start.S |
2010-08-19 |
Philippe De Muyter |
marex |
Awaiting Upstream |
| [U-Boot] mx51evk: Provide a proper reset for the Ethernet PHY |
2010-08-19 |
Fabio Estevam |
sbabic |
Rejected |
| [U-Boot] MTD: Add support for S25FL032P spi nor-flash |
2010-08-24 |
David Jander |
vapier |
Superseded |
| [U-Boot] MTD: Add support for S25FL032P spi nor-flash |
2010-08-25 |
David Jander |
|
Accepted |
| [U-Boot] AT91: add 2nd SPI to 9260/9XE/9G20 |
2010-08-25 |
Reinhard Meyer |
reinhardm |
Accepted |
| [U-Boot,v2] SPI: cmd_spi.c: add options to specify bus and mode |
2010-08-26 |
Reinhard Meyer |
vapier |
Accepted |
| [U-Boot] Orion5x: Correct DRAM bank detection |
2010-08-26 |
Rogan Dawes |
|
Accepted |
| [U-Boot,3/3] mpc8610: refactor DIU initialization code to use existing bitmap function |
2010-08-26 |
Timur Tabi |
galak |
Superseded |
| [U-Boot,1/2] TI: DaVinci DA850 EVM: add information regarding DA850 in README.davinci |
2010-08-27 |
Sekhar Nori |
spaulraj |
Superseded |
| [U-Boot,v4,2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel |
2010-08-27 |
Sekhar Nori |
spaulraj |
Superseded |
| [U-Boot] usb: fix usb start problem with SMSC USB hub and Toshiba USB stick |
2010-08-31 |
Anatolij Gustschin |
rbohmer |
Superseded |
| [U-Boot,08/11] mtd: nand: honor CONFIG_SYS_NAND_QUIET_TEST with unknown NAND printk |
2010-08-31 |
Steve Sakoman |
|
Superseded |
| [U-Boot,NET,2/2] Net: clarify board/cpu_eth_init calls |
2010-09-01 |
Ben Warren |
|
Accepted |
| [U-Boot,V2,08/11] mtd: nand: supress 'unknown NAND' warning if no nand is found |
2010-09-02 |
Steve Sakoman |
|
Superseded |
| [U-Boot,1/2] edminiv2.h: fix GPIO output value settings |
2010-09-04 |
Albert ARIBAUD |
aaribaud |
Changes Requested |
| [U-Boot,2/2] orion5x: set GPIO output value before enabling |
2010-09-04 |
Albert ARIBAUD |
aaribaud |
Changes Requested |
| [U-Boot] USB-CDC: Fix coding style issues |
2010-09-10 |
Vitaly Kuzmichev |
rbohmer |
Accepted |
| [U-Boot,v3] MTD/SPI: introduce table driven probing |
2010-09-12 |
Reinhard Meyer |
vapier |
Superseded |
| [U-Boot,v3] MTD/SPI: add support for Ramtron FRAMs |
2010-09-12 |
Reinhard Meyer |
vapier |
Superseded |
| [U-Boot,1/5] e1000: Clean up handling of dual-port NICs and support 82571 |
2010-09-13 |
Kyle Moffett |
|
Accepted |
| [U-Boot,2/5] e1000: Restructure and streamline PCI device probing |
2010-09-13 |
Kyle Moffett |
|
Superseded |
| [U-Boot,3/5] e1000: Rewrite EEPROM checksum error to give more information |
2010-09-13 |
Kyle Moffett |
|
Superseded |
| [U-Boot,4/5] e1000: New "e1000" commands for SPI EEPROM management |
2010-09-13 |
Kyle Moffett |
|
Superseded |
