Show patches with: Archived = No       |   167292 patches
« 1 2 ... 191 192 193 … 1672 1673 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v3,07/27] x86: Add a simple superio driver for SMSC LPC47M 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,06/27] x86: Add Intel Crown Bay board dts file 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,04/27] x86: Clean up asm-offsets 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,03/27] x86: Refactor u-boot.rom build rules 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,01/27] x86: Make ROM_SIZE configurable in Kconfig 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,9/9] sf: Give proper spacing between flash table params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,8/9] sf: Update Winbond flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,7/9] sf: Update Micron flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,6/9] sf: Update Spansion flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,5/9] sf: Update Macronix flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,4/9] sf: Update GigaDevice flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,3/9] sf: Update EON flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,2/9] sf: Update Atmel flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,1/9] sf: Update SST flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,2/2] x86: ich-spi: Set the tx operation mode for ich 7 - - - - --- 2014-12-10 Bin Meng sjg Superseded
[U-Boot,v3,1/2] x86: ich-spi: Set the rx operation mode for ich 7 1 - - 1 --- 2014-12-10 Bin Meng sjg Superseded
[U-Boot,RESEND] x86: ich-spi: Fix a bug of reading from a non-64 bytes aligned address 1 - - 1 --- 2014-12-10 Bin Meng sjg Accepted
[U-Boot,v2,27/27] x86: Add a README.x86 for U-Boot on x86 support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,26/27] x86: Rename coreboot-serial to x86-serial 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,25/27] x86: crownbay: Add SDHCI support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,24/27] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,23/27] x86: crownbay: Add SPI flash support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,21/27] x86: Use consistent name XXX_ADDR for binary blob flash address 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,20/27] x86: Add crownbay defconfig and config.h 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,19/27] x86: Add queensbay and crownbay Kconfig files 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,18/27] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,16/27] x86: Add basic support to queensbay platform and crownbay board - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,15/27] x86: Integrate Tunnel Creek processor microcode - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,14/27] x86: Add a simple command to show FSP HOB information 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,13/27] x86: Support Intel FSP initialization path in start.S 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,12/27] x86: Add post failure codes for bist and car 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,11/27] x86: queensbay: Adapt FSP support codes - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,10/27] x86: Initial import from Intel FSP release for Queensbay platform - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,08/27] x86: Add Intel Topcliff PCH device IDs 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,07/27] x86: Add a simple superio driver for SMSC LPC47M 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,06/27] x86: Add Intel Crown Bay board dts file 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,04/27] x86: Clean up asm-offsets 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,03/27] x86: Refactor u-boot.rom build rules 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,01/27] x86: Make ROM_SIZE configurable in Kconfig 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,25/25] x86: Add a README.x86 for U-Boot on x86 support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,24/25] x86: crownbay: Add SDHCI support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,23/25] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,22/25] x86: crownbay: Add SPI flash support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,21/25] x86: Include FSP and CMC binary in the u-boot.rom build rules - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,20/25] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,19/25] x86: Add crownbay defconfig and config.h - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,18/25] x86: Add queensbay and crownbay Kconfig files - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,17/25] x86: Add basic support to queensbay platform and crownbay board - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,16/25] x86: Integrate Tunnel Creek processor microcode - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,15/25] x86: Add a simple command to show FSP HOB information - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,14/25] x86: Support Intel FSP initialization path in start.S - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,13/25] x86: Add post failure codes for bist and car 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,12/25] x86: queensbay: Adapt FSP support codes 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,11/25] x86: Initial import from Intel FSP release for Queensbay platform - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,10/25] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,09/25] x86: ich-spi: Add Intel Tunnel Creek SPI controller support 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,08/25] x86: Add Intel Topcliff PCH device IDs 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,07/25] x86: Add a simple superio driver for SMSC LPC47M 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,06/25] x86: Add Intel Crown Bay board dts file 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,05/25] x86: ich6-gpio: Make setup_pch_gpios() a weak function - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,04/25] x86: Clean up asm-offsets 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,03/25] x86: Refactor u-boot.rom build rules 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,02/25] tools/ifdtool: Support writing multiple files (-w) simultaneously - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,01/25] x86: Make ROM_SIZE configurable in Kconfig 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot] tools: Add ifdtool to .gitignore 1 - - - --- 2014-11-25 Bin Meng sjg Accepted
[U-Boot] scripts/Makefile.lib: Make __dtb_dt_begin align on a 4 byte boundary - - - - --- 2014-11-20 Bin Meng Rejected
[U-Boot,4/4] x86: Remove unnecessary call to initr_enable_interrupts() 1 - - 1 --- 2014-11-20 Bin Meng sjg Accepted
[U-Boot,3/4] x86: Refactor interrupt_init() 1 - - 1 --- 2014-11-20 Bin Meng sjg Accepted
[U-Boot,2/4] x86: Remove cpu_init_r() for x86 1 - - 1 --- 2014-11-20 Bin Meng sjg Accepted
[U-Boot,1/4] x86: Call cpu_init_interrupts() from interrupt_init() 1 - - 1 --- 2014-11-20 Bin Meng sjg Accepted
[U-Boot,v2,4/4] x86: Save TSC frequency in the global data 1 - - 1 --- 2014-11-09 Bin Meng sjg Accepted
[U-Boot,v2,3/4] x86: Add quick TSC calibration via PIT 1 - - - --- 2014-11-09 Bin Meng sjg Accepted
[U-Boot,v2,2/4] x86: Do TSC MSR calibration only for known/supported CPUs 1 - - 1 --- 2014-11-09 Bin Meng sjg Accepted
[U-Boot,v2,1/4] x86: Do CPU identification in the early phase - - - - --- 2014-11-09 Bin Meng sjg Accepted
[U-Boot,4/4] x86: Save TSC frequency in the global data 1 - - 1 --- 2014-11-04 Bin Meng sjg Superseded
[U-Boot,3/4] x86: Add quick TSC calibration via PIT 1 - - - --- 2014-11-04 Bin Meng sjg Superseded
[U-Boot,2/4] x86: Do TSC MSR calibration only for known/supported CPUs 1 - - 1 --- 2014-11-04 Bin Meng sjg Superseded
[U-Boot,1/4] x86: Display more detailed CPU information on boot - - - - --- 2014-11-04 Bin Meng sjg Superseded
[U-Boot,v2,12/12] sf: Give proper spacing between flash table params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,11/12] sf: Update Winbond flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,10/12] sf: Update Micron flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,09/12] sf: Update Spansion flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,08/12] sf: Update Macronix flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,07/12] sf: Update GigaDevice flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,06/12] sf: Update EON flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,05/12] sf: Update Atmel flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,04/12] sf: Update SST flash params - - - - --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,03/12] spi: sf: Support byte program for sst spi flash 1 - - 1 --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,02/12] spi/ich.c: Set the rx operation mode for ich 7 1 - - 1 --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,v2,01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address 1 - - 1 --- 2014-11-01 Bin Meng jagan Superseded
[U-Boot,5/5] sf: Update SST25* flash params of sector size & numbers 1 - - 1 --- 2014-10-23 Bin Meng sjg Superseded
[U-Boot,4/5] sf: Update SST25* flash params of supported read commands 1 - - 1 --- 2014-10-23 Bin Meng sjg Superseded
[U-Boot,3/5] spi: sf: Support byte program for sst spi flash 1 - - 1 --- 2014-10-23 Bin Meng sjg Superseded
« 1 2 ... 191 192 193 … 1672 1673 »