Show patches with: Archived = No       |   167424 patches
« 1 2 ... 184 185 186 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,3/3] x86: galileo: Enable mrc cache 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,2/3] x86: quark: Implement mrc cache 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,1/3] x86: ivybridge: Fix saving mrc cache and enable it - - - - --- 2015-10-12 Bin Meng sjg Superseded
[U-Boot,13/13] x86: ivybridge: Correct two typos for MRC 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,12/13] x86: Remove unused rw-mrc-cache properties in the link and panther dts files 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,11/13] x86: baytrail: Issue full system reset in reset_cpu() 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,10/13] x86: Enable mrc cache for bayleybay and minnowmax 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,09/13] x86: baytrail: Save mrc cache to spi flash 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,08/13] x86: fsp: Pass mrc cache to fsp_init() and save it to gd after fsp_init() 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,07/13] x86: Use struct mrc_region to describe a mrc region 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,06/13] x86: ivybridge: Use APIs provided in the mrccache lib 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,05/13] x86: Add more common routines to manipulate mrc cache 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,04/13] x86: Add various minor tidy-ups in mrccache codes 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,03/13] x86: Do sanity test on the cache record in mrccache_update() 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,02/13] x86: Move mrccache.[c|h] to a common place 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,01/13] x86: Add ENABLE_MRC_CACHE Kconfig option 1 - - - --- 2015-10-12 Bin Meng sjg Accepted
[U-Boot,4/4] x86: fsp: Add a hdr sub-command to show header information 1 - - - --- 2015-10-10 Bin Meng sjg Accepted
[U-Boot,3/4] x86: fsp: Make hob command a sub-command to fsp 1 - - - --- 2015-10-10 Bin Meng sjg Accepted
[U-Boot,2/4] x86: fsp: Print GUID whenever applicable in the hob command output 1 - - - --- 2015-10-10 Bin Meng sjg Accepted
[U-Boot,1/4] x86: fsp: Compact the output of hob command 1 - - - --- 2015-10-10 Bin Meng sjg Accepted
[U-Boot,2/2] x86: Add SMBIOS table support - - - - --- 2015-10-09 Bin Meng sjg Superseded
[U-Boot,1/2] Makefile: Generate U_BOOT_DMI_DATE for SMBIOS 1 - - - --- 2015-10-09 Bin Meng sjg Superseded
[U-Boot,v3,3/3] net: eth: Check return value in various places 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v3,2/3] dm: test: Add a new test case against dm eth codes for NULL pointer access 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v3,1/3] net: eth: Clear MAC address in eth_pre_remove() 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,4/4] dm: core: Remove unnecessary codes in uclass_pre_remove_device() 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,3/4] net: pch_gbe: Add driver remove support 1 - 1 - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,2/4] net: designware: Add driver remove support 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,1/4] net: mdio: Add mdio_free() and mdio_unregister() API 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,3/3] net: phy: Test previous phydev->dev against new mac dev 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,2/3] net: phy: Change to print all phys that are not found 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v2,1/3] net: phy: Don't create phy device when there is no phy 1 - - - --- 2015-10-08 Bin Meng jhersh Accepted
[U-Boot,v3,12/12] doc: Complement document about booting VxWorks - - 1 - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,11/12] cmd: bootvx: Add asmlinkage to the VxWorks x86 entry 1 - - - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,10/12] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel 1 - 1 1 --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,09/12] cmd: bootvx: Always get VxWorks bootline from env - - 1 1 --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,08/12] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline - - 1 - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,07/12] cmd: bootvx: Avoid strlen() calls when constructing VxWorks bootline - - 1 - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,06/12] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr() - - 1 - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,05/12] cmd: Clean up cmd_elf a little bit - - 1 - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,04/12] cmd: Convert CONFIG_CMD_ELF to Kconfig - - - - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,03/12] x86: Remove quotation mark in CONFIG_HOSTNAME 1 - - - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,02/12] x86: Move install_e820_map() out of zimage.c 1 - - - --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot,v3,01/12] x86: Initialize GDT entry 1 to be the 32-bit CS as well 1 - - 1 --- 2015-10-08 Bin Meng sjg Accepted
[U-Boot] pci: Fix expansion ROM programming for multi-function devices 1 - - - --- 2015-10-07 Bin Meng sjg Accepted
[U-Boot,6/6] x86: Allow disabling IGD on Intel Queensbay 1 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,5/6] x86: ivybridge: Remove the dead codes that programs pci bridge 1 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,4/6] dm: pci: Enable VGA address forwarding on bridges 1 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,3/6] dm: pci: Fix pci_last_busno() to return the real last bus no 1 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,2/6] video: vesa_fb: Fix wrong return value check of pci_find_class() 2 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,1/6] pci: Set PCI_COMMAND_IO bit for VGA device 1 - - - --- 2015-10-01 Bin Meng sjg Accepted
[U-Boot,RFC] x86: Support booting SeaBIOS - - - - --- 2015-09-29 Bin Meng sjg Changes Requested
[U-Boot,RESPIN,v2,01/13] Reorder defconfigs with 'savedefconfig' - - - - --- 2015-09-28 Bin Meng trini Accepted
[U-Boot,v2,13/13] doc: Complement document about booting VxWorks - - 1 - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,12/13] cmd: bootvx: Add asmlinkage to the VxWorks x86 entry - - - - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,11/13] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel - - 1 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,10/13] cmd: bootvx: Always get VxWorks bootline from env - - 1 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,09/13] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline - - - - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,08/13] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr() - - 1 - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,07/13] cmd: Clean up cmd_elf a little bit - - 1 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,06/13] cmd: Convert CONFIG_CMD_ELF to Kconfig - - - 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,05/13] x86: Remove quotation mark in CONFIG_HOSTNAME 1 - - - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,04/13] x86: Move install_e820_map() out of zimage.c 1 - - - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,03/13] x86: Initialize GDT entry 1 to be the 32-bit CS as well - - - 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,02/13] x86: fsp: Report correct number of E820 table entries 1 - - 1 --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot,v2,01/13] Reorder defconfigs with 'savedefconfig' - - - - --- 2015-09-28 Bin Meng sjg Superseded
[U-Boot] tools: moveconfig: Update the URL for nds32 toolchain - - 1 - --- 2015-09-25 Bin Meng trini Accepted
[U-Boot,8/8] doc: Complement document about booting VxWorks - - 1 - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,7/8] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel - - 1 - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,6/8] cmd: bootvx: Always get VxWorks bootline from env - - 1 - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,5/8] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline - - - - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,4/8] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr() - - 1 - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,3/8] cmd: Clean up cmd_elf a little bit - - 1 - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig - - - - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot,1/8] x86: Initialize GDT entry 1 to be the 32-bit CS as well - - - - --- 2015-09-24 Bin Meng trini Superseded
[U-Boot] x86: fsp: Report correct number of E820 table entries - - - - --- 2015-09-24 Bin Meng sjg Accepted
[U-Boot] sf: Make flash->flags use for generic usage - - - 1 --- 2015-09-15 Bin Meng jagan Superseded
[U-Boot,26/28] input: Convert i8042 to driver model - - - - --- 2015-09-15 Bin Meng sjg Superseded
[U-Boot] x86: quark: Configure MTRR to enable cache 1 - - 1 --- 2015-09-14 Bin Meng sjg Accepted
[U-Boot,v5,4/4] x86: quark: Add PCIe/USB static register programming after memory init 1 - - - --- 2015-09-11 Bin Meng sjg Accepted
[U-Boot,v5,3/4] x86: Convert to use driver model eth on quark/galileo 1 - - - --- 2015-09-11 Bin Meng sjg Accepted
[U-Boot,v5,2/4] net: designware: Add support to PCI designware devices 1 - - - --- 2015-09-11 Bin Meng sjg Accepted
[U-Boot,v5,1/4] dm: pci: Add an inline API to test if a device is on a PCI bus 1 - - - --- 2015-09-11 Bin Meng sjg Accepted
[U-Boot,v2,3/3] net: eth: Check return value in various places 1 - - - --- 2015-09-10 Bin Meng jhersh Superseded
[U-Boot,v2,2/3] dm: test: Add a new test case against dm eth codes for NULL pointer access 1 - - - --- 2015-09-10 Bin Meng jhersh Superseded
[U-Boot,v2,1/3] net: eth: Clear MAC address in eth_pre_remove() - - - - --- 2015-09-10 Bin Meng jhersh Superseded
[U-Boot,v2,8/8] x86: doc: Add DMI to the TODO list 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,7/8] x86: doc: Document some porting hints about Intel Quark 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,6/8] x86: galileo: Add PCIe root port IRQ routing 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,5/8] x86: quark: Initialize thermal sensor properly 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,4/8] x86: quark: Lock HMBOUND register before jumping to kernel 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access - - 1 - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,v2,1/8] x86: galileo: Enable random mac address for Quark 1 - - - --- 2015-09-10 Bin Meng sjg Accepted
[U-Boot,8/8] x86: doc: Add DMI to the TODO list 1 - - - --- 2015-09-08 Bin Meng sjg Superseded
[U-Boot,7/8] x86: doc: Document some porting hints about Intel Quark 1 - - - --- 2015-09-08 Bin Meng sjg Superseded
[U-Boot,6/8] x86: galileo: Add PCIe root port IRQ routing 1 - - - --- 2015-09-08 Bin Meng sjg Superseded
[U-Boot,5/8] x86: quark: Initialize thermal sensor properly 1 - - - --- 2015-09-08 Bin Meng sjg Superseded
[U-Boot,4/8] x86: quark: Lock HMBOUND register before jumping to kernel 1 - - - --- 2015-09-08 Bin Meng sjg Superseded
[U-Boot,3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros - - - - --- 2015-09-08 Bin Meng sjg Superseded
« 1 2 ... 184 185 186 … 1674 1675 »