Show patches with: Archived = No       |   167419 patches
« 1 2 ... 180 181 182 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v2,3/4] x86: acpi: Pack global NVS into ACPI table - - 2 1 --- 2016-06-17 Bin Meng bmeng Accepted
[U-Boot,v2,2/4] x86: quark: Introduce ACPI global NVS - - 1 - --- 2016-06-17 Bin Meng bmeng Accepted
[U-Boot,v2,1/4] x86: baytrail: Introduce ACPI global NVS - - 2 1 --- 2016-06-17 Bin Meng bmeng Accepted
[U-Boot,4/4] x86: baytrail: acpi: Hide internal UART per GNVS setting - - 1 1 --- 2016-06-15 Bin Meng bmeng Accepted
[U-Boot,3/4] x86: acpi: Pack global NVS into ACPI table - - 2 1 --- 2016-06-15 Bin Meng bmeng Superseded
[U-Boot,2/4] x86: quark: Introduce ACPI global NVS - - 1 - --- 2016-06-15 Bin Meng bmeng Superseded
[U-Boot,1/4] x86: baytrail: Introduce ACPI global NVS - - 2 1 --- 2016-06-15 Bin Meng bmeng Superseded
[U-Boot,2/2] x86: fsp: Wrap setup_internal_uart() call with CONFIG_INTERNAL_UART - - 2 - --- 2016-06-15 Bin Meng bmeng Accepted
[U-Boot,1/2] x86: baytrail: Introduce a Kconfig option for the internal UART - - 2 - --- 2016-06-15 Bin Meng bmeng Accepted
[U-Boot,3/3] pci: Add board_ prefix to should_load_oprom() and make it weak - - 1 - --- 2016-06-14 Bin Meng bmeng Accepted
[U-Boot,2/3] pci: Make load_oprom and run_oprom independent - - 1 - --- 2016-06-14 Bin Meng bmeng Accepted
[U-Boot,1/3] pci: Remove CONFIG_ALWAYS_LOAD_OPROM - - 1 - --- 2016-06-14 Bin Meng bmeng Accepted
[U-Boot] MinnowMax GPIO for USB3 - - - - --- 2016-06-12 Bin Meng bmeng Not Applicable
[U-Boot] Please pull u-boot-x86 - - - - --- 2016-06-12 Bin Meng trini Accepted
[U-Boot,8/8] x86: broadwell: gpio: Remove the codes to set up pin control - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,7/8] x86: Probe pinctrl driver in cpu_init_r() - - 3 1 --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,6/8] x86: Enable regmap and syscon for coreboot and qemu-x86 - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,5/8] x86: Update x86-pinctrl driver device-tree-bindings doc - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,4/8] x86: baytrail: Configure card detect pin of the SD controller - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,3/8] x86: baytrail: Change fsp, emmc-boot-mode to "auto" - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,2/8] x86: baytrail: Add 'reg' property in the pinctrl node - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot,1/8] x86: ich6_gpio: Output return value of syscon_get_by_driver_data() - - 2 - --- 2016-06-08 Bin Meng bmeng Accepted
[U-Boot] Please pull u-boot-x86 - - - - --- 2016-05-30 Bin Meng trini Accepted
[U-Boot,v2,8/8] x86: baytrail: acpi: Fix I/O APIC ID in the MADT table - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,7/8] x86: galileo: Enable ACPI table generation - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,6/8] x86: quark: Generate ACPI FADT/MADT tables - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,5/8] x86: quark: Add platform ASL files - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,4/8] x86: quark: Prepare device.h for inclusion by ASL - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,3/8] acpi: Pass -D__ASSEMBLY__ when compiling ASL files - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,2/8] x86: acpi: Make irqroute.asl common - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,v2,1/8] x86: acpi: Create a common irqlinks ASL file - - 1 - --- 2016-05-26 Bin Meng bmeng Accepted
[U-Boot,8/8] x86: baytrail: acpi: Fix I/O APIC ID in the MADT table - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot,7/8] x86: galileo: Enable ACPI table generation - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot,6/8] x86: quark: Generate ACPI FADT/MADT tables - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot,5/8] x86: quark: Add platform ASL files - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot,4/8] x86: quark: Prepare device.h for inclusion by ASL - - 1 - --- 2016-05-25 Bin Meng bmeng Superseded
[U-Boot,3/8] acpi: Pass -D__ACPI__ when compiling ASL files - - 1 - --- 2016-05-25 Bin Meng bmeng Superseded
[U-Boot,2/8] x86: acpi: Make irqroute.asl common - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot,1/8] x86: acpi: Create a common irqlinks ASL file - - 1 - --- 2016-05-25 Bin Meng bmeng Accepted
[U-Boot] Please pull u-boot-x86 - - - - --- 2016-05-23 Bin Meng trini Accepted
[U-Boot,15/15] x86: galileo: Override SMBIOS product name - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,14/15] x86: Switch to use SMBIOS Kconfig options when writing SMBIOS tables - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,13/15] x86: kconfig: Add two options for SMBIOS manufacturer and product name - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,12/15] x86: galileo: Enable MP table generation - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,11/15] x86: broadwell: Correct I/O APIC ID - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,10/15] x86: quark: Assign a unique I/O APIC ID - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,09/15] x86: Call lapic_setup() in interrupt_init() - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,08/15] x86: Remove SMP limitation in lapic_setup() - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,07/15] x86: Don't touch IA32_APIC_BASE MSR on Intel Quark - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,06/15] x86: galileo: Enable CPU driver - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,05/15] x86: Use latest microcode for all BayTrail boards - - 2 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,04/15] x86: baytrail: Update to latest microcode - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,03/15] x86: Add some notes for MRC cache with Intel FSP - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,02/15] x86: crownbay: Disable boot stage support - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,01/15] acpi: Clean IASL generated intermediate files - - 1 - --- 2016-05-22 Bin Meng bmeng Accepted
[U-Boot,v2,18/18] x86: doc: Add porting hints for ACPI with Windows - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,17/18] x86: baytrail: Add GPIO ASL description - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,16/18] x86: baytrail: Add internal UART ASL description - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,15/18] acpi: Quieten IASL output when 'make -s' is used - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,14/18] x86: doc: Mention Ubuntu/Windows installation and boot support - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,13/18] x86: baytrail: Enable SeaBIOS on all boards - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,12/18] x86: doc: Update information about IGD with SeaBIOS - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,11/18] x86: acpi: Remove header length check when writing tables - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,10/18] x86: acpi: Remove the unnecessary checksum calculation of DSDT - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,09/18] x86: acpi: Switch to ACPI mode by ourselves instead of requested by OSPM - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,08/18] x86: Use high_table_malloc() for tables passing to SeaBIOS - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,07/18] x86: Reserve configuration tables in high memory - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,06/18] x86: Unify reserve_arch() for all x86 boards - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,05/18] x86: Prepare configuration tables in dedicated high memory region - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,04/18] x86: Compile coreboot_table.c only for SeaBIOS - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,03/18] x86: Fix up PIRQ routing table checksum earlier - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,02/18] x86: Call board_final_cleanup() in last_stage_init() - - 1 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,v2,01/18] x86: minnowmax: Adjust U-Boot environment address in SPI flash - - 2 - --- 2016-05-11 Bin Meng bmeng Accepted
[U-Boot,14/14] x86: doc: Add porting hints for ACPI with Windows - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,13/14] x86: baytrail: Add internal UART ASL description - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,12/14] acpi: Quieten IASL output when 'make -s' is used - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,11/14] x86: doc: Mention Ubuntu/Windows installation and boot support - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,10/14] x86: doc: Update information about IGD with SeaBIOS - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,09/14] x86: acpi: Switch to ACPI mode by ourselves instead of requested by OSPM - - - - --- 2016-05-09 Bin Meng bmeng Superseded
[U-Boot,08/14] x86: Use high_table_malloc() for tables passing to SeaBIOS - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,07/14] x86: Reserve configuration tables in high memory - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,06/14] x86: Unify reserve_arch() for all x86 boards - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,05/14] x86: Prepare configuration tables in dedicated high memory region - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,04/14] x86: Compile coreboot_table.c only for SeaBIOS - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,03/14] x86: Fix up PIRQ routing table checksum earlier - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,02/14] x86: Call board_final_cleanup() in last_stage_init() - - - - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,01/14] x86: minnowmax: Adjust U-Boot environment address in SPI flash - - 1 - --- 2016-05-09 Bin Meng bmeng Accepted
[U-Boot,v2,28/28] x86: doc: Document ACPI support - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,27/28] x86: doc: Minor update for accuracy - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,26/28] x86: Remove acpi=off boot parameter when ACPI is on - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,25/28] x86: baytrail: Add .gitignore for ACPI enabled boards - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,24/28] x86: baytrail: Enable ACPI table generation for all boards - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,23/28] x86: baytrail: Generate ACPI FADT/MADT tables - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,22/28] x86: baytrail: Add platform ASL files - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,21/28] x86: acpi: Return table length in acpi_create_madt_lapics() - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,20/28] x86: acpi: Add some generic ASL libraries - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,19/28] x86: acpi: Clean up table header revisions - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,18/28] x86: acpi: Align FACS table to a 64 byte boundary - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,17/28] x86: acpi: Use u32 in table write routines - - 1 - --- 2016-05-07 Bin Meng bmeng Accepted
[U-Boot,v2,16/28] x86: acpi: Adjust order in acpi_table.c - - 2 1 --- 2016-05-07 Bin Meng bmeng Accepted
« 1 2 ... 180 181 182 … 1674 1675 »