| [U-Boot] dm: mips: Import libgcc components from Linux |
2012-07-27 |
Marek Vasut |
danielschwierzeck |
Superseded |
| [U-Boot,V3,07/15] S3C6400: Delete nand_spl for S3C6400 |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,09/15] arm1176: Fixed No relocation. |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,10/15] S3C64XX: Change SROM init to use read/write operation |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,01/15] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,02/15] S3C64XX: Switch to use readl/writel to operate nand flash |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,03/15] S3C64XX: Use readl/writel to operate uart |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,04/15] S3C64XX: add pwm for s3c64xx support |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,06/15] S3C64xx: mov cpu_init.S to the board directory |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,08/15] S3C6400: Adopt SPL framwork to support spl for nand flash |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,15/15] S3C6400: Remove the unused variable for S3C6400 |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,v4,2/5] spl: don't mark __u_boot_cmd* as undefined |
2012-08-05 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot,V2,10/25] mxc_i2c: place imx_start code inline |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,17/25] mxc_i2c: prep work for multiple busses support |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,21/25] i.mx: iomux-v3.h: move to imx-common include directory |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,4/8,V6] EXYNOS: PINMUX: Add pinmux support for I2C |
2012-07-19 |
Rajeshwari Shinde |
hs |
Superseded |
| [U-Boot,5/8,V6] I2C: Move struct s3c24x0_i2c to a common place. |
2012-07-19 |
Rajeshwari Shinde |
hs |
Superseded |
| [U-Boot,for-rc] net: fix netconsole filtering |
2012-10-03 |
Michael Walle |
trini |
Superseded |
| [U-Boot] at91: Add support for taskit AT91SAM9G20 boards. |
2012-07-30 |
Markus Hubig |
abiessmann |
Superseded |
| [U-Boot] pull request for u-boot-tegra/master |
2012-07-30 |
Tom Warren |
aaribaud |
Superseded |
| [U-Boot,5/8] SPI: Add SPI slave mode flag |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,8/9,v6] EXYNOS5: TMU: Add hardware tripping |
2013-01-23 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,v3,1/7] dfu:usb: Support for g_dnl composite download gadget. |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v3,2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v3,3/7] dfu: DFU backend implementation |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v3,4/7] dfu: MMC specific routines for DFU operation |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v3,5/7] dfu:cmd: Support for DFU u-boot command |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v3,6/7] arm:trats: Support for USB UDC driver at TRATS board. |
2012-07-31 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,1/8] EXYNOS5: Add pinmux support for SPI |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,2/8] SPI: Add W25Q32 to Winbond SPI flash table |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,3/8] EXYNOS: Add clock for SPI. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,6/8] SPI: Add SPI Driver for EXYNOS. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,7/8] EXYNOS5: Enable SPI |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,8/8] EXYNOS5: Enable SPI booting. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,1/8,V2] EXYNOS5: Add pinmux support for SPI |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,2/8,V2] SPI: Add W25Q32 to Winbond SPI flash table |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,3/8,V2] EXYNOS: Add clock for SPI. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,5/8] SPI: Add SPI slave mode flag |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,6/8,V2] SPI: Add SPI Driver for EXYNOS. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,8/8,V2] EXYNOS5: Enable SPI booting. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot] net: Make netconsole src and dest ports configurable |
2012-07-24 |
Joe Hershberger |
jhersh |
Superseded |
| [U-Boot,v3,1/2] gpio: bcm2835: Add GPIO driver |
2012-07-31 |
Vikram Narayanan |
trini |
Superseded |
| [U-Boot,1/3] mx25: add CPU revision 1.2 |
2012-09-22 |
Eric Benard |
sbabic |
Superseded |
| [U-Boot,V2,12/13] gpio: bcm2835: Add GPIO driver |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,V2,13/13] rbpi: Add BCM2835 GPIO driver for raspberry pi |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,2/7,V3] SPI: Add W25Q32 to Winbond SPI flash table |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,3/7,V3] EXYNOS: Add clock for SPI. |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,5/7,V3] SPI: Add SPI Driver for EXYNOS. |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,6/7,V3] EXYNOS5: Enable SPI |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,PATCHv6] ARM: Add Altera SOCFPGA Cyclone5 |
2012-10-03 |
dinguyen@altera.com |
aaribaud |
Superseded |
| [U-Boot,4/8] EXYNOS5: Add base address for SPI. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,4/8,V2] EXYNOS5: Add base address for SPI. |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,7/8,V2] EXYNOS5: Enable SPI |
2012-07-31 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,v5,6/9] dfu: NAND specific routines for DFU operation |
2013-03-08 |
Tom Rini |
marex |
Superseded |
| [U-Boot,PATCHv2] at91: Add support for taskit AT91SAM9G20 boards. |
2012-08-01 |
Markus Hubig |
abiessmann |
Superseded |
| [U-Boot,v2,1/9] tools, config.mk: add binutils-version |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,v2,2/9] arm: work around assembler bug |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,v2,3/9] tegra20: remove inline assembly for u32 cast |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,v2,5/9] arm: use thumb compatible return in arm720t |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,v2,6/9] arm: change arm720t to armv4t |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,v2,7/9] arm720t: add linkage macro for relocate_code |
2012-08-01 |
Allen Martin |
|
Superseded |
| [U-Boot,5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done |
2012-08-01 |
Andrew Sharp |
|
Superseded |
| [U-Boot,v5] Corrupted NAND Flash access on KARO TX25 modules. |
2012-08-02 |
Gachet Daniel |
|
Superseded |
| [U-Boot,v3] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support |
2013-03-01 |
Jagannadha Sutradharudu Teki |
|
Superseded |
| [U-Boot,v4] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support |
2013-03-01 |
Jagannadha Sutradharudu Teki |
|
Superseded |
| [U-Boot,3/7] FAT: Fix redundant sector read |
2012-07-19 |
Benoît Thébaudeau |
|
Superseded |
| [U-Boot,PATCHv3] at91: Add support for taskit AT91SAM9G20 boards. |
2012-08-02 |
Markus Hubig |
abiessmann |
Superseded |
| [U-Boot,V2,1/3] part: add partition number to disk_partition_t |
2012-10-09 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,2/6] exynos:cpu: Add Exynos4 I2C spacing |
2012-11-15 |
Piotr Wilczek |
hs |
Superseded |
| [U-Boot,1/7,V3] EXYNOS5: Add pinmux support for SPI |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,4/7,V3] EXYNOS5: Add base address for SPI. |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,7/7,V3] Enable SPI booting. |
2012-08-01 |
Rajeshwari Shinde |
|
Superseded |
| [U-Boot,V2,2/3] FAT: make use of disk_partition_t.part |
2012-10-09 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,5/6] WIP: i2c: s3c24x0: modify driver for new I2C framework |
2012-11-15 |
Piotr Wilczek |
hs |
Superseded |
| [U-Boot,V3,2/4] ARM: arm1176: enable instruction cache in arch_cpu_init() |
2012-08-03 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,v4,3/7] dfu: DFU backend implementation |
2012-08-03 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot,v4,6/7] arm:trats: Support for USB UDC driver at TRATS board. |
2012-08-03 |
Łukasz Majewski |
marex |
Superseded |
| [U-Boot] arm: rmobile: Add support TMU base timer function |
2012-08-03 |
Nobuhiro Iwamatsu |
|
Superseded |
| [U-Boot] arm: rmobile: Add supoprt for ATMARK-TECHNO Armadillo-800EVA board |
2012-08-03 |
Nobuhiro Iwamatsu |
|
Superseded |
| [U-Boot] arm: rmobile: Add support Renesas R8A7740 |
2012-08-03 |
Nobuhiro Iwamatsu |
iwamatsu |
Superseded |
| [U-Boot] arm: rmobile: Add support PFC of Renesas R8A7740 |
2012-08-03 |
Nobuhiro Iwamatsu |
iwamatsu |
Superseded |
| [U-Boot,V2,02/13] ARM: add basic support for the Broadcom BCM2835 SoC |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,V2,03/13] ARM: bcm2835: add Raspberry Pi model B board |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,V2,04/13] ARM: arm1176: enable instruction cache in arch_cpu_init() |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,V2,09/13] ARM: rpi_b: drop RAM size to 128M |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,V2,11/13] ARM: bcm2835: implement reset using watchdog |
2012-08-01 |
Stephen Warren |
trini |
Superseded |
| [U-Boot,v2] README: Add handy kermit primer |
2012-08-03 |
Karl O. Pinc |
wd |
Superseded |
| [U-Boot,v5] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support |
2013-03-01 |
Jagannadha Sutradharudu Teki |
|
Superseded |
| [U-Boot,v6] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support |
2013-03-01 |
Jagannadha Sutradharudu Teki |
stroese |
Superseded |
| [U-Boot,v4,4/5] OMAP: networking support for SPL |
2012-08-05 |
Ilya Yanok |
jhersh |
Superseded |
| [U-Boot,v4,1/5] net/bootp: add VCI support for BOOTP also |
2012-08-05 |
Ilya Yanok |
jhersh |
Superseded |
| [U-Boot,v4,3/5] OMAP: spl: call timer_inti() from SPL |
2012-08-05 |
Ilya Yanok |
trini |
Superseded |
| [U-Boot,v2] arm: rmobile: Add support TMU base timer function |
2012-08-05 |
Nobuhiro Iwamatsu |
iwamatsu |
Superseded |
| [U-Boot,11/70] serial: pxa: Move serial registration from serial_initialize() |
2012-09-29 |
Marek Vasut |
marex |
Superseded |
| [U-Boot] at91: Add support for taskit AT91SAM9G20 boards. |
2012-08-06 |
Markus Hubig |
abiessmann |
Superseded |
| [U-Boot,v4] at91: Add support for taskit AT91SAM9G20 boards. |
2012-08-06 |
Markus Hubig |
abiessmann |
Superseded |
| [U-Boot,2/8] EXYNOS5: TMU: Add driver for Thermal Management Unit |
2012-11-06 |
Hatim RV |
|
Superseded |
| [U-Boot,13/70] serial: microblaze: Move serial registration from serial_initialize() |
2012-09-29 |
Marek Vasut |
marex |
Superseded |
| [U-Boot,14/70] serial: mpc512x: Move serial registration from serial_initialize() |
2012-09-29 |
Marek Vasut |
marex |
Superseded |
