| [U-Boot,v5,2/9] tsec: arrange the code to avoid useless function declaration |
2011-04-13 |
Andy Fleming |
|
Superseded |
| [U-Boot,v5,1/9] tsec: use IO accessors for IO accesses |
2011-04-13 |
Andy Fleming |
|
Superseded |
| [U-Boot,v2] MX51: mx51evk: Use struct to access SRSR register instead of offset |
2011-04-13 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] MX51: mx51evk: Use struct to access SRSR register instead of offset |
2011-04-13 |
Fabio Estevam |
|
Superseded |
| [U-Boot,V4] arm: Tegra2: add support for A9 CPU init |
2011-04-12 |
Tom Warren |
aaribaud |
Superseded |
| [U-Boot] part_dos: allocate sector buffer dynamically |
2011-04-12 |
Sergei Shtylyov |
|
Changes Requested |
| [U-Boot] powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 |
2011-04-12 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,3/3] Rename openrd_base files to openrd. |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot,2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate. |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot,1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot] da850evm: fix NAND WSTROBE and TA timings |
2011-04-12 |
Ben Gardiner |
|
Accepted |
| [U-Boot,3/3] Rename openrd_base files to openrd. |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot,2/3] Initialize second PHY on OpenRD-Client and OpenRD-Ultimate. |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot,1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate |
2011-04-12 |
Clint Adams |
|
Superseded |
| [U-Boot,V4,4/4] VCMA9: various cleanups/code style fixes |
2011-04-12 |
David Müller (ELSOFT AG) |
|
Changes Requested |
| [U-Boot,V4,3/4] VCMA9: use the CFI driver (and remove the old one) |
2011-04-12 |
David Müller (ELSOFT AG) |
|
Accepted |
| [U-Boot,V4,2/4] VCMA9: remove unneeded config.mk |
2011-04-12 |
David Müller (ELSOFT AG) |
|
Accepted |
| [U-Boot,V4,1/4] VCMA9: activate ARM relocation feature |
2011-04-12 |
David Müller (ELSOFT AG) |
|
Changes Requested |
| [U-Boot,v2] I2C: OMAP: detect more devices when probing an i2c bus |
2011-04-12 |
Nick Thompson |
hs |
Accepted |
| [U-Boot] cfi_flash driver - Add delay after reset command |
2011-04-12 |
Aaron Williams |
stroese |
Accepted |
| [U-Boot] cfi_flash driver: fixed addressing for 8-bit flash buses. |
2011-04-12 |
Aaron Williams |
stroese |
Changes Requested |
| [U-Boot] Blackfin: adi boards: add eon to the "all" spi flash list |
2011-04-12 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot] gpio: check request result |
2011-04-12 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot] Do not copy to same address |
2011-04-12 |
Matthias Weisser |
aaribaud |
Superseded |
| [U-Boot,v2,2/2] ftide020: add faraday ide ahb controller |
2011-04-12 |
Macpaul Lin |
|
Changes Requested |
| [U-Boot,v2,1/2] cmd_ide: enhance new feature "CONFIG_IDE_AHB" |
2011-04-12 |
Macpaul Lin |
|
Accepted |
| [U-Boot,9/9] cmd_sf: use cmd_usage() in more places |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,8/9] cmd_sf: drop device status message when probing |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,7/9] sf: use print_size() for sector_size output |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,6/9] cmd_sf: add handler for +len arg for erase command |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,5/9] sf: localize erase funcs |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,4/9] sf: sst: setup read func |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,3/9] sf: add struct spi_flash.sector_size parameter |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,2/9] sf: atmel: undo unification of status polling |
2011-04-12 |
Mike Frysinger |
|
Accepted |
| [U-Boot,1/9] sf: punt unused spi_flash_region struct |
2011-04-12 |
Mike Frysinger |
|
Superseded |
| [U-Boot,PATCHv3,4/4] armv7: Add support for ST-Ericsson U8500 href platform |
2011-04-12 |
John Rigby |
|
Superseded |
| [U-Boot,PATCHv3,3/4] I2C: Add driver for ST-Ericsson U8500 i2c |
2011-04-12 |
John Rigby |
|
Accepted |
| [U-Boot,PATCHv3,2/4] armv7: Add ST-Ericsson u8500 arch |
2011-04-12 |
John Rigby |
|
Superseded |
| [U-Boot,PATCHv3,1/4] Serial: p1011: new vendor init options |
2011-04-12 |
John Rigby |
|
Accepted |
| [U-Boot,v4] spi: add new driver for OpenCores tiny_spi |
2011-04-12 |
Thomas Chou |
|
Accepted |
| [U-Boot] STx AMC8548: initial support for Silicon Turnkey Express AMC8548 board |
2011-04-12 |
Alex Dubov |
galak |
Changes Requested |
| [U-Boot] ftwdt010_wdt: move header to include/faraday and enhance |
2011-04-12 |
Macpaul Lin |
|
Accepted |
| [U-Boot,v5] ARM: mx31: Print the silicon version |
2011-04-12 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v4] ARM: mx31: Print the silicon version |
2011-04-12 |
Fabio Estevam |
|
Superseded |
| [U-Boot,v3] ARM: mx31: Print the silicon version |
2011-04-12 |
Fabio Estevam |
|
Superseded |
| [U-Boot] [v4 powerpc: use 'video-mode' environment variable to configure DIU |
2011-04-11 |
Timur Tabi |
ag |
Superseded |
| [U-Boot] JFFS2: accelerate scanning. |
2011-04-11 |
Baidu Boy |
marex |
Superseded |
| [U-Boot] JFFS2: bug fix for summary support. |
2011-04-11 |
Baidu Boy |
marex |
Superseded |
| [U-Boot,v2] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices |
2011-04-11 |
Heiko Schocher |
stroese |
Awaiting Upstream |
| [U-Boot,1/6] eNET: Fix saveenv crash |
2011-04-11 |
Graeme Russ |
gruss |
Accepted |
| [U-Boot] mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices |
2011-04-11 |
Heiko Schocher |
stroese |
Accepted |
| [U-Boot] I2C: OMAP: detect more devices when probing an i2c bus |
2011-04-11 |
Nick Thompson |
hs |
Superseded |
| [U-Boot,v2] ARM: mx31: Print the silicon version |
2011-04-11 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v8,10/10] adp-ag101: add board adp-ag101 support |
2011-04-11 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v8,09/10] nds32: common bdinfo, bootm, image support |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,08/10] nds32: standalone support |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,07/10] nds32/lib: add generic funcs in NDS32 lib |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,06/10] nds32/ag101: cpu and init funcs of SoC ag101 |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,05/10] nds32/ag101: lowlevel_init.S of ag101 |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,04/10] nds32/ag101: dev offset header of SoC ag101 |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,03/10] nds32/core N1213: NDS32 N12 core family N1213 |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,02/10] nds32: add NDS32 support into common header file |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,v8,01/10] nds32: add header files support for nds32 |
2011-04-11 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot] Fix the issue of _end symbol not being found while building |
2011-04-10 |
Sughosh Ganu |
aaribaud |
Accepted |
| [U-Boot] cfi_flash: reverse geometry for M29W800DT parts |
2011-04-10 |
Mike Frysinger |
stroese |
Accepted |
| [U-Boot,v2,2/2] MX31: mx31pdk: Print the cause of reset |
2011-04-10 |
Fabio Estevam |
|
Superseded |
| [U-Boot,v2,1/2] MX31: mx31pdk: Add watchdog support |
2011-04-10 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] Please pull u-boot-mpc85xx.git |
2011-04-10 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] gpio: imx: Fix return value on error |
2011-04-09 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,2/2] p4080/serdes: Implement the XAUI workaround for SERDES9 erratum |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,1/2] powerpc/85xx: fsl_corenet_serdes code rework |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc/p4080: Add support for secure boot flow on CoreNet Based QorIQ chips |
2011-04-09 |
Kumar Gala |
galak |
Changes Requested |
| [U-Boot] powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,6/6] EA20: do not use subpage write for NAND |
2011-04-09 |
Stefano Babic |
spaulraj |
Changes Requested |
| [U-Boot,3/6] Davinci: ea20: Add NAND support |
2011-04-09 |
Stefano Babic |
spaulraj |
Accepted |
| [U-Boot] powerpc/85xx: Integrated Flash Controller NAND support |
2011-04-09 |
Kumar Gala |
|
Changes Requested |
| [U-Boot] powerpc/85xx: Add device tree fixup for bman portal |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc/85xx: Change CS timing parameters before changing CS properties on IFC |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc/85xx: Modify NAND loader makefiles to compile NAND_SPL linker script |
2011-04-09 |
Kumar Gala |
|
Accepted |
| [U-Boot] powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb |
2011-04-09 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/2] MIPS: Coding style cleanups on common assembly files |
2011-04-09 |
Shinya Kuribayashi |
|
Changes Requested |
| [U-Boot,1/2] MIPS: Remove mips_cache_lock() feature |
2011-04-09 |
Shinya Kuribayashi |
|
Accepted |
| [U-Boot] zlib: split up to match original source tree |
2011-04-08 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot,30/30] arm/km: update mgcoge3un board support |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,29/30] arm/km: change default settings for egiga on mgcoge3un |
2011-04-08 |
Valentin Longchamp |
|
Changes Requested |
| [U-Boot,28/30] arm/km: rename mgcoge2un to mgcoge3un |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,27/30] km/common: simplify default environment |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,26/30] arm, powerpc, keymile boards: move keymile specific header in subdir |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,25/30] km/common: fix coding style issues in generic header |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,24/30] km/common: add pnvramsize to default environment |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,23/30] km/common: replace env var checkboardidlist by function |
2011-04-08 |
Valentin Longchamp |
|
Changes Requested |
| [U-Boot,22/30] km/common: implement setboardid as a command |
2011-04-08 |
Valentin Longchamp |
|
Changes Requested |
| [U-Boot,21/30] common/hush: make get_local_var visible for other users |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,20/30] km/common: fix initial_boot_bank for bootpackages |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,19/30] i2c, soft_i2c: deblock bus if switching to another i2c bus |
2011-04-08 |
Valentin Longchamp |
|
Accepted |
| [U-Boot,18/30] i2c: add i2c deblock sequence before and after every mux config |
2011-04-08 |
Valentin Longchamp |
|
Accepted |
| [U-Boot,17/30] cramfs: make cramfs usable without a NOR flash |
2011-04-08 |
Valentin Longchamp |
|
Changes Requested |
| [U-Boot,16/30] arm/km: add second serial interface for kirkwood |
2011-04-08 |
Valentin Longchamp |
|
Superseded |
