| [U-Boot,v2,3/6] TFTP: rename "server" to "remote" |
2011-04-18 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,v2,2/6] NET: pass source IP address to packet handlers |
2011-04-18 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,v2,1/6] README: remove spurious line |
2011-04-18 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,PATCHv2,1/2] MMC: make b_max unconditional |
2011-04-18 |
John Rigby |
afleming |
Accepted |
| [U-Boot,v1] ARMV7: AM3517/05: Add support for CraneBoard. |
2011-04-18 |
srinath@mistralsolutions.com |
|
Accepted |
| [U-Boot,PATCH-V2,2/2] at91: reworked support for otc570 board |
2011-04-18 |
Daniel Gorsulowski |
reinhardm |
Accepted |
| [U-Boot,PATCH-V2,1/2] at91: reworked support for meesc board |
2011-04-18 |
Daniel Gorsulowski |
reinhardm |
Accepted |
| [U-Boot,V2,15/15] hammerhead: move CONFIG_SYS_TEXT_BASE to header |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,14/15] mimc200: move CONFIG_SYS_TEXT_BASE to header |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,13/15] favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,12/15] atstk100x: move CONFIG_SYS_TEXT_BASE to header |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,11/15] atngw100: move CONFIG_SYS_TEXT_BASE to header |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,10/15] mimc200: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,09/15] hammerhead: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,08/15] favr-32-ezkit: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,07/15] atstk1006: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,06/15] atstk1004: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,05/15] atstk1003: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,04/15] atstk1002: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,03/15] atngw100: fix "#define XXXX 1" |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,02/15] avr32: use single linker script |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,V2,01/15] avr32/config.mk: simplify PLATFORM_RELFLAGS |
2011-04-18 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,v2] S5P: GPIO Macro Values Corrected. |
2011-04-18 |
Chander Kashyap |
prom |
Accepted |
| [U-Boot,4/4] at91sam9261/g10: move config from Makefile to boards.cfg |
2011-04-18 |
Alessandro Rubini |
reinhardm |
Superseded |
| [U-Boot,3/4] at91sam9261/g10: support relocation |
2011-04-18 |
Alessandro Rubini |
reinhardm |
Changes Requested |
| [U-Boot,2/4] ARM: don't relocate if we are already too high |
2011-04-18 |
Alessandro Rubini |
aaribaud |
Rejected |
| [U-Boot,1/4] atmel_dataflash: remove use of get_timer_masked |
2011-04-18 |
Alessandro Rubini |
reinhardm |
Rejected |
| [U-Boot] hwmon: Extend lm63.c to support LM64 |
2011-04-18 |
Dirk Eibach |
|
Accepted |
| [U-Boot,3/8,v2] ppc4xx: Enable LM64 on DLVision 10G |
2011-04-18 |
Dirk Eibach |
stroese |
Accepted |
| [U-Boot] mmc_spi: add mmc_init call |
2011-04-18 |
Thomas Chou |
afleming |
Accepted |
| [U-Boot] S5PC2XX: GPIO Macro Values Corrected. |
2011-04-18 |
Chander Kashyap |
prom |
Changes Requested |
| [U-Boot] S5PC2XX: GPIO Macro Values Corrected. |
2011-04-18 |
Chander Kashyap |
prom |
Changes Requested |
| [U-Boot] Pull request: u-boot-fdt |
2011-04-18 |
Jerry Van Baren |
gvb |
Accepted |
| [U-Boot,3/3] versatile: support relocation |
2011-04-17 |
Alessandro Rubini |
|
Superseded |
| [U-Boot,2/3] versatile: use boards.confg |
2011-04-17 |
Alessandro Rubini |
|
Superseded |
| [U-Boot,1/3] ARM: don't panic if no flash is there |
2011-04-17 |
Alessandro Rubini |
|
Rejected |
| [U-Boot,V2] JFFS2: accelerate scanning. |
2011-04-17 |
Baidu Boy |
|
Changes Requested |
| [U-Boot] nios2: Make STANDALONE_LOAD_ADDR configurable per board |
2011-04-17 |
Thomas Chou |
smcnutt |
Accepted |
| [U-Boot,V2] JFFS2: bug fix for summary support. |
2011-04-17 |
Baidu Boy |
|
Changes Requested |
| [U-Boot,2/3,V2] nhk8815: add support for relocation |
2011-04-16 |
Alessandro Rubini |
aaribaud |
Accepted |
| [U-Boot,V4,3/3] ARMV7: Vexpress: Add MMC support |
2011-04-16 |
matt.waddel@linaro.org |
afleming |
Accepted |
| [U-Boot,V4,2/3] MMC: Add support for PL180 ARM mmc device |
2011-04-16 |
matt.waddel@linaro.org |
afleming |
Accepted |
| [U-Boot,v2] cmd_nvedit.c: clean up with checkpatch |
2011-04-16 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,3/3] nhk8815: move config targets from Makefile to boards.cfg |
2011-04-16 |
Alessandro Rubini |
aaribaud |
Accepted |
| [U-Boot,2/3] nhk8815: add support for relocation |
2011-04-16 |
Alessandro Rubini |
aaribaud |
Superseded |
| [U-Boot,1/3] nhk8815: remove platform.S, which was unused at link time |
2011-04-16 |
Alessandro Rubini |
aaribaud |
Accepted |
| [U-Boot,v3,4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd |
2011-04-16 |
Macpaul Lin |
aaribaud |
Accepted |
| [U-Boot,v3,3/4] ftsdmc020: move ftsdmc020.h to include/faraday |
2011-04-16 |
Macpaul Lin |
aaribaud |
Accepted |
| [U-Boot,v3,2/4] ftsdmc021: add register definitions of ftsdmc021 |
2011-04-16 |
Macpaul Lin |
aaribaud |
Rejected |
| [U-Boot,v3,1/4] ftahbc020s: Faraday FTAHBC020s AHB Bus Controller |
2011-04-16 |
Macpaul Lin |
aaribaud |
Rejected |
| [U-Boot,v4,3/3] MX31: mx31pdk: Print the cause of reset |
2011-04-16 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v4,2/3] MX31: Introduce get_reset_cause() |
2011-04-16 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v4,1/3] ARM: MX31: Fix file name label |
2011-04-16 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,V2,2/2] mmc: enable partition switch fucntion for emmc |
2011-04-16 |
Lei Wen |
afleming |
Superseded |
| [U-Boot] sf: kick watchdog when polling |
2011-04-16 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot] Pull request: nand flash |
2011-04-15 |
Scott Wood |
|
Accepted |
| [U-Boot,V4,2/2] MX53: support for freescale MX53LOCO board |
2011-04-15 |
Liu Hui-R64343 |
sbabic |
Superseded |
| [U-Boot,V4,1/2] MX5: factor out boot cause funciton to common code |
2011-04-15 |
Liu Hui-R64343 |
sbabic |
Superseded |
| [U-Boot,1/1] at91: reworked support for otc570 board |
2011-04-15 |
Daniel Gorsulowski |
reinhardm |
Superseded |
| [U-Boot] xilinx_emaclite.c ping-pong macro names |
2011-04-15 |
alain.peteut@space.unibe.ch |
wd |
Changes Requested |
| [U-Boot,v4,4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,v4,3/4] ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,v4,2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,v4,1/4] ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot] mpc83xx fdt: do not adjust clock frequency of external UARTs |
2011-04-15 |
David Müller (ELSOFT AG) |
kimphill |
Rejected |
| [U-Boot,4/4] ARMV7: OMAP3: Add support for Comelit DIG297 board |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,3/4] ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions |
2011-04-15 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,1/4] ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot] xilinx_emaclite.c ping-pong macro names |
2011-04-15 |
alain.peteut@space.unibe.ch |
|
Changes Requested |
| [U-Boot,V3,2/2] MX53: support for freescale MX53LOCO board |
2011-04-15 |
Liu Hui-R64343 |
|
Superseded |
| [U-Boot,V3,1/2] MX5: factor out boot cause funciton to common code |
2011-04-15 |
Liu Hui-R64343 |
|
Superseded |
| [U-Boot] cmd_nvedit.c: clean up with checkpatch |
2011-04-15 |
Macpaul Lin |
|
Superseded |
| [U-Boot] S5P:SROM config code moved to s5p-common directory |
2011-04-15 |
Chander Kashyap |
prom |
Changes Requested |
| [U-Boot,v3,3/3] MX31: mx31pdk: Print the cause of reset |
2011-04-15 |
Fabio Estevam |
|
Superseded |
| [U-Boot,v3,2/3] MX31: Introduce get_reset_cause() |
2011-04-15 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v3,1/3] ARM: MX31: Fix file name label |
2011-04-15 |
Fabio Estevam |
|
Accepted |
| [U-Boot] ARM: fix stack pointer adjustment in board_init_f() |
2011-04-14 |
Eric Cooper |
aaribaud |
Accepted |
| [U-Boot,V5] arm: Tegra2: add support for A9 CPU init |
2011-04-14 |
Tom Warren |
aaribaud |
Accepted |
| [U-Boot,V2,3/3] arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init |
2011-04-14 |
Tom Warren |
aaribaud |
Accepted |
| [U-Boot,V2,2/3] arm: Tegra2: GPIO: Add basic GPIO definitions |
2011-04-14 |
Tom Warren |
aaribaud |
Accepted |
| [U-Boot,V2,1/3] arm: Tegra2: Add missing PLLX init |
2011-04-14 |
Tom Warren |
aaribaud |
Accepted |
| [U-Boot] fsl-ddr: Fix mixed-case macro names |
2011-04-14 |
Kyle Moffett |
galak |
Accepted |
| [U-Boot,6/6] TFTP: add tftpsrv command |
2011-04-14 |
Luca Ceresoli |
|
Changes Requested |
| [U-Boot,5/6] TFTP: net/tftp.c: add server mode receive |
2011-04-14 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ |
2011-04-14 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,3/6] TFTP: rename "server" to "remote" |
2011-04-14 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,2/6] NET: pass source IP address to packet handlers |
2011-04-14 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,1/6] README: remove spurious line |
2011-04-14 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,PATCHv2] MMC: disable multiblock rw on old rev OMAP3 silicon |
2011-04-14 |
John Rigby |
|
Changes Requested |
| [U-Boot,4/4] MergerBox: add board specific files in vendor dir. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,3/4] MergerBox: add maintainer and boards.cfg entries. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,2/4] MergerBox: add documentation. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,1/4] MergerBox: Add board config file. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,v2] MPC837x: set i2c1_clk |
2011-04-14 |
Andre Schwarz |
kimphill |
Changes Requested |
| [U-Boot] MPC83xx: add config options for memory setup. |
2011-04-14 |
Andre Schwarz |
kimphill |
Accepted |
| [U-Boot] MPC83xx: add define for global half-strength enable (HSE) |
2011-04-14 |
Andre Schwarz |
kimphill |
Accepted |
| [U-Boot] MPC837x: set i2c1_clk Running on mpc837x without CONFIG_FSL_ESDHC leads to i2c1_clk not being set at all. It is bound to clock of encryption module. fix this. |
2011-04-14 |
Andre Schwarz |
|
Accepted |
| [U-Boot] MatrixVision common code: use getenv_f instead of snprintf. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,2/2] S5PC1XX: Refers to SROM config code in s5p-common directory. Header file renamed from smc.h to sromc.h. |
2011-04-14 |
Chander Kashyap |
prom |
Changes Requested |
