| [U-Boot] MMC may wrongly regconize 2GB eMMC as high capacity |
2011-03-21 |
Terry Lv |
|
Superseded |
| [U-Boot] MMC may wrongly regconize 2GB eMMC as high capacity |
2011-03-23 |
Raffaele Recalcati |
afleming |
Accepted |
| [U-Boot] MMC0: DMA transfer failed |
2012-04-02 |
Fabio Estevam |
|
Not Applicable |
| [U-Boot] MMC: add erase function to both mmc and sd |
2011-06-16 |
Lei Wen |
|
Superseded |
| [U-Boot] MMC: omap_hsmmc.c: Add missing prototype header |
2011-05-15 |
Dirk Behme |
afleming |
Accepted |
| [U-Boot] MPC512x FEC/MII |
2011-09-09 |
Schneider, Kolja |
dzu |
Rejected |
| [U-Boot] MPC8260: Fix compile problems with "hymod" board |
2011-05-01 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] MPC8308: Fixup clocks in PCI Host configuration |
2013-01-08 |
Barry Grussling |
kimphill |
Superseded |
| [U-Boot] MPC8360EMDS: 512MB DDR and 33.33MHz oscillator support |
2011-10-27 |
Jerry Huang |
kimphill |
Superseded |
| [U-Boot] MPC837x: set i2c1_clk Running on mpc837x without CONFIG_FSL_ESDHC leads to i2c1_clk not being set at all. It is bound to clock of encryption module. fix this. |
2011-04-14 |
Andre Schwarz |
|
Accepted |
| [U-Boot] MPC83XX: Fix PCI express clock setup |
2011-05-25 |
Bill Cook |
|
Accepted |
| [U-Boot] MPC83xx: add config options for memory setup. |
2011-04-14 |
Andre Schwarz |
kimphill |
Accepted |
| [U-Boot] MPC83xx: add define for global half-strength enable (HSE) |
2011-04-14 |
Andre Schwarz |
kimphill |
Accepted |
| [U-Boot] MPC85XX: compile stub cache function |
2012-07-20 |
Stefano Babic |
|
Accepted |
| [U-Boot] MPC85xx: remove broken "mpq101" board |
2011-10-23 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] MPC85xx: remove support for TQM85xx boards |
2012-10-04 |
Wolfgang Denk |
trini |
Accepted |
| [U-Boot] MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC |
2011-12-16 |
Paul Gortmaker |
galak |
Accepted |
| [U-Boot] MPC8xx: Make SPD823TS board build again |
2011-05-21 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] MPC8xx: fix "Remove volatile from net API" aftermath |
2012-05-21 |
Wolfgang Denk |
jhersh |
Awaiting Upstream |
| [U-Boot] MPC8xx: fix build problem for ETX094 board |
2011-08-26 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] MPC8xx: fix build problem for ETX094 board |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] MPC8xxx: Define cache ops for USB |
2012-05-25 |
Marek Vasut |
|
Superseded |
| [U-Boot] MPC8xxx: drop redundant boot messages |
2011-07-25 |
Wolfgang Denk |
galak |
Accepted |
| [U-Boot] MTD/NAND: fix nand_base.c to use get_timer() correctly |
2010-11-18 |
Reinhard Meyer |
scottwood |
Accepted |
| [U-Boot] MTD: Add support for S25FL032P spi nor-flash |
2010-08-24 |
David Jander |
vapier |
Superseded |
| [U-Boot] MTD: Add support for S25FL032P spi nor-flash |
2010-08-25 |
David Jander |
|
Accepted |
| [U-Boot] MTD: SPEAr SMI: Add write support for length < 4 bytes |
2012-05-08 |
Stefan Roese |
|
Accepted |
| [U-Boot] MUSB driver: Timeout is never detected as the while loop does not end |
2012-08-29 |
Matej Frančeškin |
marex |
Superseded |
| [U-Boot] MUSB driver: Timeout is never detected as the while loop does not end |
2012-08-30 |
Matej Frančeškin |
marex |
Accepted |
| [U-Boot] MUSB timeout broken |
2011-07-04 |
Orjan Friberg |
|
Changes Requested |
| [U-Boot] MX25: tx25: Add _end section on nand_spl |
2011-04-03 |
Fabio Estevam |
aaribaud |
Accepted |
| [U-Boot] MX25: tx25: Cleanup tx25.h config |
2011-08-30 |
Fabio Estevam |
|
Awaiting Upstream |
| [U-Boot] MX25: tx25: Fix build by making use of GPIO framework |
2011-08-29 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX25: tx25: Fix building due to missing MACH_TYPE |
2011-10-28 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX25: tx25: Pass NAND_U_BOOT option |
2011-09-13 |
Fabio Estevam |
sbabic |
Rejected |
| [U-Boot] MX25: zmx25: GCC4.6 fix build warnings |
2011-11-06 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX27: add missing get_tbclk() |
2012-02-07 |
Stefano Babic |
sbabic |
Changes Requested |
| [U-Boot] MX28: Add SchulerControl SC_SPS_1 platform |
2012-08-01 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot] MX28: Fix MXSBOOT segfault if no params specified |
2011-12-22 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot] MX28: Fix get_timer() / get_tbclk() issue |
2012-02-07 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot] MX28: MMC: Avoid DMA DCache race condition |
2012-09-01 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot] MX28: Move the u-boot.bd info CPUDIR/SOCDIR |
2012-08-05 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot] MX28: SPI: Fix CTRL0 not being written at end of DMA transfer |
2012-08-29 |
Marek Vasut |
|
Rejected |
| [U-Boot] MX28: SPI: Limit the DMA transfer length |
2012-08-21 |
Marek Vasut |
|
Superseded |
| [U-Boot] MX28: mx28evk: Follow m28evk change in SSP clock |
2012-08-27 |
Otavio Salvador |
|
Changes Requested |
| [U-Boot] MX31: Cleanup clock function |
2011-07-13 |
Stefano Babic |
sbabic |
Changes Requested |
| [U-Boot] MX31: Disable watchdog during low-power modes |
2011-09-19 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot] MX31: Improve readability for reset cause |
2011-09-16 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX31: Make get_cpu_rev() and get_reset_cause() static |
2011-04-21 |
Fabio Estevam |
|
Superseded |
| [U-Boot] MX31: QONG: drop config.mk |
2011-06-09 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX31: change return value of get_cpu_rev |
2011-04-29 |
Stefano Babic |
|
Changes Requested |
| [U-Boot] MX31: drop warnings due to missing prototype for mxc_watchdog_reset() |
2011-05-20 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX31: drop warnings in get_cpu_rev |
2011-04-21 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX31: mx31pdk: Make the board name simpler. |
2011-04-18 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX31: mx31pdk: Remove nand_spl config.mk file |
2011-09-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX31: mx31pdk: drop enable_caches from board file |
2012-04-06 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX31: mx31pdk: make use of GPIO framework |
2011-09-07 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX31: removed warning due to missing prototype |
2011-04-26 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX31: removed warnings due to clock.h |
2011-07-28 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX35: Added bootcounter to mx35 |
2011-04-03 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX35: MX35PDK: support additional RAM on CSD1 |
2011-08-21 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX35: flea3: changes due to hardware revision B |
2011-11-25 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MX35: mx35pdk: add support for MMC |
2012-09-06 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MX35: mx35pdk: wrong board revision |
2012-04-09 |
Stefano Babic |
|
Superseded |
| [U-Boot] MX3: make additional hardware and clocks available |
2011-06-09 |
Helmut Raiger |
sbabic |
Changes Requested |
| [U-Boot] MX51: efikamx: fix wrong name in boards.cfg |
2011-07-13 |
Stefano Babic |
|
Changes Requested |
| [U-Boot] MX51: mx51evk: Use struct to access SRSR register instead of offset |
2011-04-13 |
Fabio Estevam |
|
Superseded |
| [U-Boot] MX51: vision2: Fix build for vision2 board. |
2011-05-10 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX51: vision2: Set global macros |
2011-09-28 |
Stefano Babic |
sbabic |
Changes Requested |
| [U-Boot] MX51: vision2: add MACH_TYPE in config file |
2011-10-27 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MX51: vision: Let video mode struct be independant of watchdog. |
2011-05-10 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX53: Add initial support for MX53SMD board. |
2011-05-12 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] MX53: Handle silicon revision 2.1 case |
2011-04-26 |
Fabio Estevam |
|
Superseded |
| [U-Boot] MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. |
2011-05-15 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX53: mx53evk: Remove duplicate define |
2011-05-11 |
Fabio Estevam |
|
Superseded |
| [U-Boot] MX5: Add initial support for mx53 |
2010-12-06 |
Liu Hui-R64343 |
sbabic |
Superseded |
| [U-Boot] MX5: Enable flat-device-tree support on mx53 loco board |
2011-03-29 |
Jason Liu |
|
Changes Requested |
| [U-Boot] MX5: Make IPU display output and pixel format configurable |
2011-09-27 |
Marek Vasut |
ag |
Superseded |
| [U-Boot] MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged |
2012-05-09 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX5: Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss |
2011-01-23 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk |
2012-10-26 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MX5: drop config.mk from efikamx board |
2011-05-19 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR |
2012-08-28 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX5: fix warning in clock.c |
2012-10-24 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MX5: mx53loco: do not overwrite the console |
2012-08-05 |
Stefano Babic |
sbabic |
Accepted |
| [U-Boot] MX6: drop binary constants from iomux header |
2012-09-16 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX: MX35 / MX5: uniform clock command with powerpc |
2011-08-17 |
Stefano Babic |
|
Accepted |
| [U-Boot] MX: Set a common gpio.h for all i.MX |
2012-08-18 |
Stefano Babic |
sbabic |
Changes Requested |
| [U-Boot] MX: serial_mxc: cleanup removing nasty #ifdef |
2011-11-22 |
Stefano Babic |
sbabic |
Awaiting Upstream |
| [U-Boot] MXC: removed warnings from IMX51 ATA driver |
2011-02-01 |
Stefano Babic |
|
Accepted |
| [U-Boot] MXS NAND: DMA read error |
2012-04-17 |
Lauri Hintsala |
|
Not Applicable |
| [U-Boot] MXS-NAND: Backport ecc.size from linux kernel |
2011-12-18 |
Marek Vasut |
|
Rejected |
| [U-Boot] Make it possible to allocate physical address 0 with lmb |
2011-01-26 |
Grant Likely |
|
RFC |
| [U-Boot] Makefile : fix generation of cpu related asm-offsets.h |
2011-08-17 |
Stefano Babic |
|
Superseded |
| [U-Boot] Makefile: Add the missing dependency for spl target |
2011-11-05 |
Aneesh V |
stroese |
Accepted |
| [U-Boot] Makefile: Fix build with USE_PRIVATE_LIBGCC |
2010-11-18 |
Matthias Weisser |
|
Accepted |
| [U-Boot] Makefile: Remove mmc_spl related enteries |
2011-11-08 |
Chander Kashyap |
|
Accepted |
| [U-Boot] Makefile: add tools/mkenvimage to target 'clean' |
2011-11-29 |
Horst Kronstorfer |
ag |
Accepted |
| [U-Boot] Makefile: avoid "Generating asm-offsets.h" message with "-s" |
2012-07-27 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] Makefile: change LIB to LIB-y |
2012-06-28 |
Daniel Schwierzeck |
|
Superseded |
