| [U-Boot,4/7] fm-eth: use fdt_status_disabled() function in ft_fixup_port() |
2012-08-14 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot,v2] powerpc: 'monitor' environment variable contains full video configuration |
2011-03-14 |
Timur Tabi |
|
Superseded |
| [U-Boot,2/2] powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot |
2011-09-06 |
Timur Tabi |
galak |
Changes Requested |
| [U-Boot,v4] powerpc/85xx: fix compatible property for the L2 cache node |
2011-04-29 |
Timur Tabi |
|
Accepted |
| [U-Boot,2/7] fm-eth: add function fm_info_get_phy_address() |
2012-08-14 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot,1/2] fdt: add prototype for fdt_increase_size() |
2011-05-03 |
Timur Tabi |
gvb |
Accepted |
| [U-Boot,2/3] phylib: wait for TN2020 to achieve SERDES lane alignment at startup |
2011-10-05 |
Timur Tabi |
|
Superseded |
| [U-Boot] powerpc/mp: add support for discontiguous cores |
2011-08-05 |
Timur Tabi |
galak |
Accepted |
| [U-Boot,5/7] powerpc/p5040ds: add per pci endpoint liodn offset list |
2012-10-05 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot,2/2] fman: insert the Fman firmware into the device tree |
2011-05-03 |
Timur Tabi |
galak |
Accepted |
| [U-Boot,3/3] powerpc/85xx: use fdt_create_phandle() to create the Fman firmware phandles |
2011-09-20 |
Timur Tabi |
|
Accepted |
| [U-Boot,2/2,v3] powerpc/85xx: add support the ePAPR "phandle" property |
2011-05-10 |
Timur Tabi |
galak |
Accepted |
| [U-Boot,1/6] powerpc/mpc85xx: fix Unicode characters in release.S |
2012-10-01 |
Timur Tabi |
afleming |
Superseded |
| [U-Boot,2/2] powerpc/85xx: add support the ePAPR "phandle" property |
2011-05-06 |
Timur Tabi |
|
Superseded |
| [U-Boot,3/3,v2] powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) |
2011-10-07 |
Timur Tabi |
galak |
Changes Requested |
| [U-Boot,1/2,v2] powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros |
2011-08-03 |
Timur Tabi |
galak |
Superseded |
| [U-Boot,1/6] powerpc/85xx: add support for FM2 DTSEC5 |
2012-08-10 |
Timur Tabi |
|
Superseded |
| [U-Boot] powerpc: clean up DIU macro definitions for the MPC8610HPCD and MPC5121ADS |
2011-02-15 |
Timur Tabi |
|
Superseded |
| [U-Boot] cmd_bdinfo: replace print_str() with print_mhz() |
2011-10-05 |
Timur Tabi |
|
Accepted |
| [U-Boot] powerpc: 'monitor' environment variable contains full video configuration |
2011-03-10 |
Timur Tabi |
|
Superseded |
| [U-Boot,7/7,v3] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board |
2012-10-05 |
Timur Tabi |
afleming |
Superseded |
| [U-Boot,v2] powerpc/85xx: introduce 'fdt verify' command |
2010-11-17 |
Timur Tabi |
|
Superseded |
| [U-Boot] powerpc/mpc83xx: fix copyright string in serdes.c |
2012-06-19 |
Timur Tabi |
kimphill |
Accepted |
| [U-Boot,v3] powerpc/85xx: introduce 'fdt verify' command |
2010-11-17 |
Timur Tabi |
galak |
Changes Requested |
| [U-Boot,6/7,v3] powerpc/85xx: Add P5040 processor support |
2012-10-05 |
Timur Tabi |
afleming |
Superseded |
| [U-Boot] powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR |
2012-03-26 |
Timur Tabi |
afleming |
Accepted |
| [U-Boot,2/7] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs |
2012-10-05 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot] powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro when setting the PCI LIODNs |
2012-07-25 |
Timur Tabi |
afleming |
Accepted |
| [U-Boot,3/6] powerpc/85xx: introduce function serdes_device_from_fm_port() |
2012-08-10 |
Timur Tabi |
|
Superseded |
| [U-Boot,2/2,v2] net: abort network initialization if the PHY driver fails |
2012-07-06 |
Timur Tabi |
|
Changes Requested |
| [U-Boot,2/5] powerpc/85xx: introduce SET_PCI_LIODN_BASE, for setting PCI LIODNs |
2012-08-31 |
Timur Tabi |
afleming |
Superseded |
| [U-Boot] powerpc/85xx: remove support for the Freescale P3060 |
2012-07-06 |
Timur Tabi |
afleming |
Superseded |
| [U-Boot,6/6] powerpc/85xx: update P4080DS MDIO bus multiplexer support |
2012-08-10 |
Timur Tabi |
|
Superseded |
| [U-Boot] powerpc/85xx/p5040: add CONFIG_SYS_PPC64, del CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC |
2012-10-23 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot,5/7] powerpc/85xx: get rid of enum board_slots in P4080 MDIO driver |
2012-08-14 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot] video/powerpc: don't touch DIU registers that we don't need |
2012-09-17 |
Timur Tabi |
ag |
Accepted |
| [U-Boot] fsl: board EEPROM has the CRC in the wrong location |
2012-07-12 |
Timur Tabi |
afleming |
New |
| [U-Boot,v4] powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board |
2012-10-23 |
Timur Tabi |
afleming |
Awaiting Upstream |
| [U-Boot,2/2,v3] net: abort network initialization if the PHY driver fails |
2012-07-09 |
Timur Tabi |
jhersh |
Accepted |
| [U-Boot,2/2] net: abort network initialization if the PHY driver fails |
2012-07-05 |
Timur Tabi |
|
Superseded |
| [U-Boot,1/2] phylib: phy_startup() should return an error code on failure |
2012-07-05 |
Timur Tabi |
jhersh |
Accepted |
| [U-Boot] ppc4xx: 460SX Eegier board support |
2010-12-09 |
Tirumala Marri |
|
Changes Requested |
| [U-Boot,v3,08/12] OMAP3 SPL: Add identify_nand_chip function |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,v10,5/9] spl: Add POWER library to new spl |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot,4/5] am33xx evm: Add CONFIG_CMD_EEPROM and related |
2012-07-31 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v2,7/7] am335x_evm: Add support to boot from NOR. |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v3,02/12] OMAP3: Add a helper function to set timings in SDRC |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot] devkit8000: Fix NAND SPL on boards with 256MB NAND |
2011-10-26 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,09/17] am33xx: Pass to config_ddr the type of memory that is connected |
2012-07-30 |
Tom Rini |
trini |
Accepted |
| [U-Boot,1/2] config_cmd_default.h: Remove CONFIG_CMD_MEMTEST |
2013-04-19 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v3,04/12] OMAP3: Remove get_mem_type prototype |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,v10,1/9] omap-common/omap4: relocate early UART clock setup |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot,v7,16/29] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux |
2012-09-25 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,05/14] OMAP3: Remove get_mem_type prototype |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,2/2] am335x: Drop board_sysinfo struct |
2011-10-21 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot,v3,03/12] OMAP3: Change mem_ok to clear again after reading back |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,v7,20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK |
2012-09-25 |
Tom Rini |
trini |
Accepted |
| [U-Boot,V2,4/5] ARM: OMAP: Cleanup boot parameters usage |
2013-05-08 |
Tom Rini |
trini |
Awaiting Upstream |
| [U-Boot,v3,07/12] OMAP3 SPL: Rework memory initalization and devkit8000 support |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot] Please pull u-boot-ti/master |
2013-01-11 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot] Please pull u-boot-ti/next |
2012-07-09 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot,V2,5/5] ARM: OMAP: Add arch_cpu_init function |
2013-05-08 |
Tom Rini |
trini |
Awaiting Upstream |
| [U-Boot,v3,01/12] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,v2,01/12] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() |
2011-11-08 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,v1,1/9] ata_piix: Fix checkpatch issues |
2012-09-29 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,07/14] OMAP3: Add optimal SDRC autorefresh control values |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v10,4/9] spl: add NAND Library to new SPL |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot,1/2] am335x: Temporarily add MACH_TYPE define |
2011-10-21 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot,5/5] am335x evm: Add am335x_evm_spiboot target |
2013-02-08 |
Tom Rini |
trini |
Accepted |
| [U-Boot] P1022DS: Set CONFIG_SPL_MAX_SIZE directly |
2013-05-03 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v3,05/12] OMAP3: Add optimal SDRC autorefresh control values |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,04/12] OMAP3: Remove get_mem_type prototype |
2011-11-07 |
Tom Rini |
|
Superseded |
| [U-Boot,17/17] am33xx: Do not touch 'ratio1' fields |
2012-07-30 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,04/14] OMAP3: Change mem_ok to clear again after reading back |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v3,11/12] AM3517: Add SPL support |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,6/8] AM35xx: Read and set ethaddr for EMAC |
2011-12-06 |
Tom Rini |
|
Changes Requested |
| [U-Boot,v7,21/29] hawkboard: Update config file to work with common spl framework |
2012-09-25 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,03/14] OMAP3: Add a helper function to set timings in SDRC |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v3,12/12] AM3517 CraneBoard: Add SPL support |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot] OMAP3: Change omap3_evm maintainer |
2011-11-09 |
Tom Rini |
|
Accepted |
| [U-Boot,2/5] am33xx: Remove board/ti/am335x/evm.c |
2012-07-31 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,02/14] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v3,06/12] OMAP3: Suffix all Micron memory timing parts with their speed |
2011-11-09 |
Tom Rini |
spaulraj |
Superseded |
| [U-Boot,1/1] devkit8000: Add malloc space for SPL |
2011-10-18 |
Tom Rini |
|
Accepted |
| [U-Boot,v4,1/6] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init |
2012-06-20 |
Tom Rini |
marex |
Superseded |
| [U-Boot,v2,4/7] am335x_evm: Only set CONFIG_NAND when !CONFIG_SPI_BOOT |
2013-05-13 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v10,6/9] omap3: new SPL structure support |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot] Please pull u-boot-ti/master |
2013-02-04 |
Tom Rini |
aaribaud |
Superseded |
| [U-Boot,03/17] am33xx: Remove DMM_BASE define |
2012-07-30 |
Tom Rini |
trini |
Accepted |
| [U-Boot,v4,10/14] OMAP3 SPL: Add identify_nand_chip function |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v10,3/9] omap-common: add nand spl support |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot,v7,06/29] ARM: SPL: Rename omap_boot_device to spl_boot_device |
2012-09-25 |
Tom Rini |
trini |
Accepted |
| [U-Boot,11/17] am33xx: Clean up unused DDR defines, prefix more with 'DDR2' |
2012-07-30 |
Tom Rini |
trini |
Accepted |
| [U-Boot] omap3: Rework board.c for !CONFIG_SYS_L2CACHE_OFF |
2012-10-31 |
Tom Rini |
trini |
Accepted |
| [U-Boot] Please pull u-boot-ti/master |
2013-02-19 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot] Please pull u-boot-ti/master |
2013-02-07 |
Tom Rini |
aaribaud |
Accepted |
| [U-Boot] Please pull u-boot-ti/master |
2012-10-23 |
Tom Rini |
aaribaud |
Superseded |
| [U-Boot,v4,11/14] OMAP3: Add SPL support to Beagleboard |
2011-11-18 |
Tom Rini |
spaulraj |
Accepted |
| [U-Boot,v10,7/9] devkit8000: Add nand-spl support for new SPL |
2011-09-13 |
Tom Rini |
|
Accepted |
| [U-Boot,v7,07/29] ARM: SPL: Rename omap_boot_mode to spl_boot_mode() |
2012-09-25 |
Tom Rini |
trini |
Accepted |