| [U-Boot,RFC,V1,14/18] usb: gadget: mv_udc: use static initialization of ops, udc |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,v3,1/7] nand: Add zynq nand controller driver support |
2014-02-17 |
Siva Durga Prasad Paladugu |
aaribaud |
Changes Requested |
| [U-Boot,v3,3/7] zynq: Add zynq_zc770 xm011 board support |
2014-02-17 |
Siva Durga Prasad Paladugu |
aaribaud |
Changes Requested |
| [U-Boot,v3,7/7] zynq: Enable nand env. support |
2014-02-17 |
Siva Durga Prasad Paladugu |
aaribaud |
Changes Requested |
| [U-Boot] Please pull u-boot-ti/master |
2013-12-04 |
Tom Rini |
aaribaud |
Changes Requested |
| [U-Boot,v11,1/6] arm: add Faraday ARMv5TE cores support |
2014-03-26 |
Kuo-Jung Su |
|
Changes Requested |
| [U-Boot,RFC,V1,06/18] usb: gadget: config: fix unaligned access issues |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,RFC,V1,08/18] usb: gadget: mv_udc: add MX6Q specific reset |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,RFC,V1,10/18] usb: gadget: ether: return error from rx_submit if no request |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot] Pull request: u-boot-spi/master |
2014-01-27 |
Jagannadha Sutradharudu Teki |
trini |
Changes Requested |
| [U-Boot,RFC,V1,15/18] usb: gadget: mv_udc: set is_dualspeed = 1 |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,RFC,V1,04/18] nitrogen6x: add otg usb ethernet gadget support |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,RFC,V1,16/18] usb: gadget: mv_udc: fix full speed connections |
2013-07-16 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors |
2013-07-22 |
Robert Winkler |
|
Changes Requested |
| [U-Boot,RFC,1/2] ARMV7: OMAP4: Add struct for twl603x data |
2013-07-24 |
Oleg Kosheliev |
trini |
Changes Requested |
| [U-Boot,RFC] armv7:omap4-common: Correct check of the SPL image size |
2013-07-24 |
Oleg Kosheliev |
trini |
Changes Requested |
| [U-Boot,1/2] arm: smdkc100: remove config.mk file |
2013-07-25 |
Minkyu Kang |
prom |
Changes Requested |
| [U-Boot,v4,2/2] exynos5250: arndale: Add mmc support |
2013-07-25 |
Chander Kashyap |
prom |
Changes Requested |
| [U-Boot] arm:samsung:cpu_info: Rename s5p_* to samsung_* |
2013-07-25 |
Lukasz Majewski |
prom |
Changes Requested |
| [U-Boot,RFC,2/2] ARMV7: OMAP4: Add twl6032 support |
2013-07-24 |
Oleg Kosheliev |
trini |
Changes Requested |
| [U-Boot,1/1] OMAP3: igep00x0: allow booting with a FDT from MMC |
2013-07-14 |
Javier Martinez Canillas |
trini |
Changes Requested |
| [U-Boot] imx: Add documentation for imx specific commands |
2013-07-24 |
Robert Winkler |
|
Changes Requested |
| [U-Boot,v7,10/11] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate() |
2013-07-29 |
Kuo-Jung Su |
aaribaud |
Changes Requested |
| [U-Boot] mx27: add missing constant for mx27 |
2013-05-28 |
trem |
sbabic |
Changes Requested |
| [U-Boot,v4,3/4] apf27: add FPGA support for the apf27 board |
2013-07-28 |
trem |
sbabic |
Changes Requested |
| [U-Boot,v4,4/4] Update u-boot-nand.bin to be used with spl |
2013-07-28 |
trem |
sbabic |
Changes Requested |
| [U-Boot,v4,2/4] apf27: add support for the armadeus APF27 board |
2013-07-28 |
trem |
sbabic |
Changes Requested |
| [U-Boot,v12,3/8] arm: add Faraday ARMv5TE platform common libraries |
2014-04-01 |
Kuo-Jung Su |
aaribaud |
Changes Requested |
| [U-Boot,v12,4/8] arm: faraday: add FTTMR010 timer suppor |
2014-04-01 |
Kuo-Jung Su |
aaribaud |
Changes Requested |
| [U-Boot,v12,5/8] arm: faraday: add FTPWMTMR010 timer support |
2014-04-01 |
Kuo-Jung Su |
aaribaud |
Changes Requested |
| [U-Boot,v12,8/8] arm: faraday: add faraday virtual machine support |
2014-04-01 |
Kuo-Jung Su |
aaribaud |
Changes Requested |
| [U-Boot,10/11] ARM: mxs: Enable 4x6 font for X-Fi3 |
2013-07-30 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot] i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED |
2013-07-31 |
Marek Vasut |
hs |
Changes Requested |
| [U-Boot] ARM: mxs: tools: Add mkimage support for MXS bootstream |
2013-07-31 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,v2,1/2] fsl_i2c: generate nine pulses on SCL if the I2C bus is hung |
2013-08-01 |
Chunhe Lan |
hs |
Changes Requested |
| [U-Boot,V2,10/20] usb: gadget: ether: return error from rx_submit if no request |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,08/20] usb: gadget: mv_udc: add MX6Q specific reset |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,13/20] usb: gadget: mv_udc: fix typo in error message |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,08/20] usb: gadget: mv_udc: add MX6Q specific reset |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,06/20] usb: gadget: config: fix unaligned access issues |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,03/20] nitrogen6x: add otg usb ethernet gadget support |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,04/20] nitrogen6x: add CONFIG_MV_UDC |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,05/20] arch-mxs/sys_proto.h: include regs-common.h |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,05/20] nitrogen6x: add CONFIG_MV_UDC |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,17/20] usb: gadget: mv_udc: flush item before head |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,07/20] arch-mxs/sys_proto.h: include regs-common.h |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,09/20] usb: gadget: ether set wMaxPacketSize |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,16/20] usb: gadget: mv_udc: optimize bounce |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,18/20] usb: gadget: mv_udc: optimize ep_enable |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,07/20] usb: gadget: config: fix unaligned access issues |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,10/20] usb: gadget: ether: return error from rx_submit if no request |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,09/20] usb: gadget: ether set wMaxPacketSize |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,13/20] usb: gadget: mv_udc: fix typo in error message |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,16/20] usb: gadget: mv_udc: optimize bounce |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,17/20] usb: gadget: mv_udc: flush item before head |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,18/20] usb: gadget: mv_udc: optimize ep_enable |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,06/20] usb: gadget: mv_udc: fix hardware udc address for i.MX6 |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,02/20] mx6: iomux: add GPR1 defines |
2013-08-01 |
Troy Kisky |
sbabic |
Changes Requested |
| [U-Boot,V3,03/20] nitrogen6x: add otg usb ethernet gadget support |
2013-08-01 |
Troy Kisky |
sbabic |
Changes Requested |
| [U-Boot,3/3] eSDHC: Calculate envaddr accroding to the address format |
2013-12-02 |
Haijun.Zhang |
panto |
Changes Requested |
| [U-Boot,1/7,V2] mmc: Add some usefull macro definition |
2013-11-08 |
Haijun.Zhang |
panto |
Changes Requested |
| [U-Boot,1/3] esdhc: Workaround for card can't be detected on T4240QDS |
2013-12-02 |
Haijun.Zhang |
panto |
Changes Requested |
| [U-Boot,2/3] esdhc: Detecting 8 bit width before mmc initialization |
2013-12-02 |
Haijun.Zhang |
panto |
Changes Requested |
| [U-Boot,RESEND,1/5] arm:goni: Update configuration for goni target |
2013-08-06 |
Mateusz Zalega |
prom |
Changes Requested |
| [U-Boot,RESEND,4/5] trats: new USB hardware init interface |
2013-08-06 |
Mateusz Zalega |
prom |
Changes Requested |
| [U-Boot,u-boot,RFC,v1] sdp4430: Enable Falcon boot mode for mmc (RAW and FAT) |
2013-08-06 |
Oleksandr Tyshchenko |
trini |
Changes Requested |
| [U-Boot,2/2] arm: goni: remove config.mk file |
2013-07-25 |
Minkyu Kang |
prom |
Changes Requested |
| [U-Boot,V2,19/20] usb: gadget: mv_udc: zero transfer descriptor memory on probe |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,v5,2/2] exynos5250: arndale: Add mmc support |
2013-08-06 |
Chander Kashyap |
prom |
Changes Requested |
| [U-Boot,02/10] power: Add support for TPS65090 PMU chip. |
2014-03-26 |
Simon Glass |
prom |
Changes Requested |
| [U-Boot,01/11,V10] EXYNOS5: Create a common board file |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,03/11,V10] EXYNOS5420: Add power register structure. |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,06/11,V10] Exynos5420: Add DDR3 initialization for 5420 |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,10/11,V10] Config: Add initial config for SMDK5420 |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,05/11,V10] Exynos5420: Add clock initialization for 5420 |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,08/11,V10] Exynos5420: Add base patch for SMDK5420 |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,11/11,V10] SPL: EXYNOS: Prepare for variable size SPL support |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,07/11,V10] Exynos5420: Add support for 5420 in pinmux and gpio |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot,09/11,V10] DTS: Add dts support for SMDK5420 |
2013-12-09 |
Rajeshwari Birje |
prom |
Changes Requested |
| [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool) |
2013-12-04 |
Måns Rullgård |
sbabic |
Changes Requested |
| [U-Boot,RFC,V2] imx: add multi-BOM README |
2013-11-09 |
Eric Nelson |
sbabic |
Changes Requested |
| [U-Boot,RFC] imx: add multi-architecture README |
2013-11-09 |
Eric Nelson |
sbabic |
Changes Requested |
| [U-Boot,1/1] arm: mx5: Add fuse supply gate enable in fsl_iim |
2013-12-12 |
Sergey Alyoshin |
sbabic |
Changes Requested |
| [U-Boot,v4,5/8] ARM: trigger non-secure state switch during bootm execution |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
| [U-Boot,v4,1/8] ARM: prepare armv7.h to be included from assembly source |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
| [U-Boot,v3] arm: mx5: Add fuse supply enable in fsl_iim |
2013-12-17 |
Sergey Alyoshin |
sbabic |
Changes Requested |
| [U-Boot] mii: dump: parameter choice |
2013-08-12 |
Stephan Bauroth |
jhersh |
Changes Requested |
| [U-Boot] video: mxc_ipuv3: fix memory alignment of framebuffer |
2013-07-26 |
Eric Nelson |
sbabic |
Changes Requested |
| [U-Boot,v3,1/4] arm, am33xx: add defines for gmii_sel_register bits |
2013-07-30 |
Heiko Schocher |
trini |
Changes Requested |
| [U-Boot,V2,12/20] usb: udc: add udc.h include file |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,14/20] usb: gadget: mv_udc: set is_dualspeed = 1 |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot] DFU: fix for raw data write |
2013-08-06 |
Mateusz Zalega |
|
Changes Requested |
| [U-Boot,1/4] gpio: atmel: fix code to use pointer for pio port |
2013-08-13 |
Bo Shen |
abiessmann |
Changes Requested |
| [U-Boot,V2,02/20] mx6: iomux: add GPR1 defines |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V2,06/20] usb: gadget: mv_udc: fix hardware udc address for i.MX6 |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,V3,15/20] usb: gadget: mv_udc: fix full speed connections |
2013-08-01 |
Troy Kisky |
marex |
Changes Requested |
| [U-Boot,v4,2/8] ARM: add secure monitor handler to switch to non-secure state |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
| [U-Boot,v4,3/8] ARM: add assembly routine to switch to non-secure state |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
| [U-Boot,v4,6/8] ARM: add SMP support for non-secure switch |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
| [U-Boot,v4,8/8] ARM: VExpress: enable ARMv7 virt support for VExpress A15 |
2013-08-09 |
Andre Przywara |
aaribaud |
Changes Requested |
