| [U-Boot,2/5] Added extra documentation about how the relocation address to RAM is picked for ARM. |
2011-07-04 |
Christopher Harvey |
|
Changes Requested |
| [U-Boot,1/5] Added documentation for CONFIG_SYS_TEXT_BASE for ARM. |
2011-07-04 |
Christopher Harvey |
|
Changes Requested |
| [U-Boot,v2] MUSB timeout broken |
2011-07-04 |
Orjan Friberg |
marex |
Accepted |
| [U-Boot] MUSB timeout broken |
2011-07-04 |
Orjan Friberg |
|
Changes Requested |
| [U-Boot,v2] scb9328: Add ARM relocation support |
2011-07-04 |
Torsten Koschorrek |
sbabic |
Changes Requested |
| [U-Boot,2/2] smc911x MII made available |
2011-07-04 |
Helmut Raiger |
|
Accepted |
| [U-Boot,1/2] net/eth.c: make eth_get_dev_by_name(NULL) safe |
2011-07-04 |
Helmut Raiger |
|
Superseded |
| [U-Boot] Pull request: u-boot-arm/master |
2011-07-04 |
Albert ARIBAUD |
|
Accepted |
| [U-Boot,3/3] arm: omap: innovator: use common code for machine type |
2011-07-04 |
Igor Grinberg |
aaribaud |
Accepted |
| [U-Boot,2/3] arm: nvidia and smdk6400: use common code for machine type |
2011-07-04 |
Igor Grinberg |
aaribaud |
Accepted |
| [U-Boot,1/3] arm: add CONFIG_MACH_TYPE option and documentation |
2011-07-04 |
Igor Grinberg |
|
Changes Requested |
| [U-Boot] arm: auto gen asm-offsets.h for mb86r0x |
2011-07-04 |
Matthias Weisser |
|
Superseded |
| [U-Boot] Remove volatile qualifier in get_ram_size() calls |
2011-07-03 |
Albert ARIBAUD |
|
Accepted |
| [U-Boot] Pull request: nand flash |
2011-07-01 |
Scott Wood |
|
Accepted |
| [U-Boot] mx27: Make the UART port number explicit |
2011-07-01 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v3,2/2] avr32: add grasshopper (ICnova AP7000) board |
2011-07-01 |
Andreas Bießmann |
reinhardm |
Accepted |
| [U-Boot,2/2] powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 |
2011-07-01 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,1/2] powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014 |
2011-07-01 |
Kumar Gala |
galak |
Superseded |
| [U-Boot] powerpc/85xx: Add default usb mode and phy type to hwconfig |
2011-07-01 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/2] powerpc/85xx: Fix the work-arounds for errata SERDES-8 & SERDES-A001 on p4080 |
2011-07-01 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,1/2] powerpc/85xx: remove SERDES4 soft-reset work-around |
2011-07-01 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] powerpc/p2040rdb: Add p2040rdb board support |
2011-07-01 |
Mingkai Hu |
galak |
Changes Requested |
| [U-Boot] fix unconfigured out-of-tree building of tools |
2011-07-01 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot,PATCH/RFC,v5] unify version_string |
2011-06-30 |
Andreas Bießmann |
|
Superseded |
| [U-Boot,1/1] mmc: S5P: Support DMA restarts at buffer boundaries |
2011-06-30 |
Anton staaf |
prom |
Accepted |
| [U-Boot,8/8] Updates the boards.cfg file |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,7/8] Updates the at91sam9m10g45ek.h config file. |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,6/8] Adds wait to atmel_usart serial_init function |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,5/8] Updates the board specific files for the at91sam9mg45ek. |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,4/8] Updates the at91sam9mg45_matrix.h header to new defines. |
2011-06-30 |
Alex |
reinhardm |
Superseded |
| [U-Boot,3/8] Fix compile problem for some boards in the clock code. |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,2/8] Update at91sam9m10g45_devices.c to fix compile errors. |
2011-06-30 |
Alex |
reinhardm |
Changes Requested |
| [U-Boot,1/8] Remove old config stuff from Makefile |
2011-06-30 |
Alex |
reinhardm |
Superseded |
| [U-Boot,8/8] Updates the boards.cfg file |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,7/8] Updates the at91sam9m10g45ek.h config file. |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,6/8] Adds wait to atmel_usart serial_init function |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,5/8] Updates the board specific files for the at91sam9mg45ek. |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,4/8] Updates the at91sam9mg45_matrix.h header to new defines. |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,3/8] Fix compile problem for some boards in the clock code. |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,2/8] Update at91sam9m10g45_devices.c to fix compile errors. |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,1/8] Remove old config stuff from Makefile |
2011-06-30 |
Alex.Waterman.awaterman@dawning.com |
reinhardm |
Superseded |
| [U-Boot,v2,2/2] ext2: Simplify partial sector access logic |
2011-06-30 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,1/2] ext2: Fix checkpatch violations |
2011-06-30 |
Anton staaf |
|
Accepted |
| [U-Boot] powerpc/eeprom: cleanup mac command |
2011-06-30 |
York Sun |
|
Superseded |
| [U-Boot] powerpc/corenet_ds: add back buffer write for NOR flash |
2011-06-30 |
York Sun |
galak |
Accepted |
| [U-Boot,ATMEL] add ATMEL_PMC_UHP define to at91sam9261/63 header |
2011-06-30 |
Jens Scharsig |
reinhardm |
Accepted |
| [U-Boot] GNU specific sed argument in rules.mk |
2011-06-30 |
Jeroen Hofstee |
|
RFC |
| [U-Boot] powerpc/mpc8xxx: Allow override DDR read-to-write turnaround time |
2011-06-30 |
York Sun |
galak |
Accepted |
| [U-Boot] build: Add targets for auto gen of asm-offsets.h and use it in imx35 |
2011-06-30 |
Matthias Weisser |
sbabic |
Accepted |
| [U-Boot,RFC] smc911x: enable mii commands |
2011-06-30 |
Luca Ceresoli |
|
Not Applicable |
| [U-Boot,Nios] Pull Request |
2011-06-30 |
Scott McNutt |
|
Accepted |
| [U-Boot] U-boot SPL direct Linux boot |
2011-06-30 |
Heiko Schocher |
|
Superseded |
| [U-Boot] Pull request: u-boot-arm/master (updated) |
2011-06-30 |
Albert ARIBAUD |
|
Superseded |
| [U-Boot,v2] avr32: add grasshopper (ICnova AP7000) board |
2011-06-30 |
Andreas Bießmann |
reinhardm |
Superseded |
| [U-Boot,5/5] imx: Add support for zmx25 board |
2011-06-30 |
Matthias Weisser |
|
Changes Requested |
| [U-Boot,4/5] imx: Add auto generation of asm-offsets.h for imx25 |
2011-06-30 |
Matthias Weisser |
sbabic |
Superseded |
| [U-Boot,3/5] imx: Add support for USB EHCI on imx25 |
2011-06-30 |
Matthias Weisser |
|
Changes Requested |
| [U-Boot,2/5] imx: Use correct imx25 reset.c |
2011-06-30 |
Matthias Weisser |
|
Changes Requested |
| [U-Boot,1/5] imx: Add get_tbclk() function for imx25 |
2011-06-30 |
Matthias Weisser |
|
Accepted |
| [U-Boot,2/2] MX27: Update to autogenerated asm-offsets.h |
2011-06-30 |
Stefano Babic |
sbabic |
Superseded |
| [U-Boot,1/2] MX5: Update to autogenerated asm-offsets.h |
2011-06-30 |
Stefano Babic |
sbabic |
Superseded |
| [U-Boot,GIT,PULL] Pull request: u-boot-imx |
2011-06-30 |
Stefano Babic |
|
Accepted |
| [U-Boot,PULL,request] u-boot-atmel/master |
2011-06-30 |
Reinhard Meyer |
reinhardm |
Accepted |
| [U-Boot] Pull request: u-boot-arm/master |
2011-06-30 |
Albert ARIBAUD |
|
Superseded |
| [U-Boot] Makefile: need to remove generated u-boot-nand_spl.lds |
2011-06-30 |
Kumar Gala |
|
Accepted |
| [U-Boot,PATCH/RFC,v4] unify version_string |
2011-06-29 |
Andreas Bießmann |
|
Superseded |
| [U-Boot] panic: add noreturn attribute |
2011-06-29 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot] GNU specific sed argument in rules.mk |
2011-06-29 |
Jeroen Hofstee |
|
RFC |
| [U-Boot,v3,3/3] arm: ca9x4_ct_vxp: enable CONFIG_BOOTP_PXE |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,2/3] net: bootp: add PXE/RFC 4578 DHCP options support |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,1/3] lib: add uuid_str_to_bin for use with bootp and PXE uuid |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,7/7] arm: ca9x4_ct_vxp: enable pxecfg support |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,6/7] Add pxecfg command |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,5/7] common: add run_command2 for running simple or hush commands |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,4/7] cosmetic, main: correct indentation/spacing issues |
2011-06-29 |
Jason Hobbs |
|
Accepted |
| [U-Boot,v3,3/7] common, menu: use abortboot for menu timeout |
2011-06-29 |
Jason Hobbs |
|
Superseded |
| [U-Boot,v3,2/7] cosmetic, main: clean up declarations of abortboot |
2011-06-29 |
Jason Hobbs |
|
Accepted |
| [U-Boot,v3,1/7] Add generic, reusable menu code |
2011-06-29 |
Jason Hobbs |
|
Deferred |
| [U-Boot,RFC,7/7] omap4: adapt Makefile for spl building |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,6/7] omap: common spl support for OMAP3/4 |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,5/7] armv7: adapt Makefile for spl building |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,4/7] Hook spl directory into main Makefile |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,3/7] Add new folder and build system for SPL |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,2/7] Use ALL-y style instead of ifeq blocks for better readability and upgradeability |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot,RFC,1/7] Adapt config.mk for usage in spl/Makefile |
2011-06-29 |
Aneesh V |
|
RFC |
| [U-Boot] arm: Update jadecpu board |
2011-06-29 |
Matthias Weisser |
aaribaud |
Accepted |
| [U-Boot] video: Use memset instead of loop |
2011-06-29 |
Matthias Weisser |
ag |
Accepted |
| [U-Boot] smc911x MII made available |
2011-06-29 |
Helmut Raiger |
|
Superseded |
| [U-Boot,ATMEL] Fix compiler error for cpu at91sam9, if lowlevel init is enabled |
2011-06-29 |
esw@bus-elektronik.de |
reinhardm |
Accepted |
| [U-Boot] Please pull u-boot-cfi-flash |
2011-06-29 |
Stefan Roese |
|
Accepted |
| [U-Boot,V2,2/2] MMC: add marvell sdhci driver |
2011-06-29 |
Lei Wen |
afleming |
Awaiting Upstream |
| [U-Boot,V2,1/2] MMC: add sdhci generic framework |
2011-06-29 |
Lei Wen |
afleming |
Awaiting Upstream |
| [U-Boot] Pull request u-boot-blackfin.git |
2011-06-29 |
Mike Frysinger |
wd |
Rejected |
| [U-Boot,18/18] Blackfin: adi boards: also set stderr to nc with helper |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,17/18] Blackfin: update anomaly lists to latest public info |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,16/18] Blackfin: serial: convert to bfin_{read, write} helpers |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,15/18] Blackfin: split out async setup |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,14/18] Blackfin: adi boards: enable pretty flash progress output |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,13/18] Blackfin: drop unused dma.h header from start code |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,12/18] Blackfin: portmux: allow header to be included in assembly files |
2011-06-28 |
Mike Frysinger |
vapier |
Accepted |
