Show patches with: Archived = No       |   81070 patches
« 1 2 ... 157 158 159810 811 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot] Pull request: nand flash - - - - 0 0 0 2016-02-13 Scott Wood trini Accepted
[U-Boot] x86: fix memalign() parameter order - - 2 1 0 0 0 2016-02-12 Stephen Warren bmeng Accepted
[U-Boot] usb: eth: fix memalign() parameter order 1 - 2 - 0 0 0 2016-02-12 Stephen Warren marex Accepted
[U-Boot,2/3] arm: mvebu: spi.h: Add registers for direct write access - - - - 0 0 0 2016-02-12 Stefan Roese stroese Accepted
[U-Boot,1/3] arm: mvebu: Add some SPI CS attributes - - - - 0 0 0 2016-02-12 Stefan Roese stroese Accepted
[U-Boot] fpga: altera: Add StratixV support - - - - 0 0 0 2016-02-12 Stefan Roese stroese Accepted
[U-Boot] gpio: Add DM GPIO driver for Marvell MVEBU - - 1 1 0 0 0 2016-02-12 Stefan Roese stroese Accepted
[U-Boot,v3,3/3] ARM: uniphier: enable GPIO command and driver for UniPhier SoCs 1 - - - 0 0 0 2016-02-12 Masahiro Yamada masahir0y Accepted
[U-Boot,v2,3/3] ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards - - - - 0 0 0 2016-02-12 Masahiro Yamada masahir0y Accepted
[U-Boot,v2,2/3] ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board - - - - 0 0 0 2016-02-12 Masahiro Yamada masahir0y Accepted
[U-Boot,v2,1/3] ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board - - - - 0 0 0 2016-02-12 Masahiro Yamada masahir0y Accepted
[U-Boot,GIT] Pull request: u-boot-dfu - - - - 0 0 0 2016-02-12 Łukasz Majewski marex Accepted
[U-Boot,4/4] stm32: add support for stm32f7 & stm32f746 discovery board - - - - 0 0 0 2016-02-11 Vikas Manocha trini Accepted
[U-Boot,3/4] stm32x7: add support for stm32x7 serial driver - - 1 - 0 0 0 2016-02-11 Vikas Manocha trini Accepted
[U-Boot,2/4] gpio: stm32_gpio: move base addresses to the soc file - - - - 0 0 0 2016-02-11 Vikas Manocha trini Accepted
[U-Boot,1/4] gpio: stm32_gpio: move clock config from driver to board - - - - 0 0 0 2016-02-11 Vikas Manocha trini Accepted
[U-Boot] Pull request: u-boot-video/master - - - - 0 0 0 2016-02-11 Anatolij Gustschin trini Accepted
[U-Boot,2/2] dm: Use uclass_first_device_err() where it is useful - - - - 0 0 0 2016-02-11 Simon Glass sjg Accepted
[U-Boot,1/2] dm: core: Add uclass_first_device_err() to return a valid device - - - - 0 0 0 2016-02-11 Simon Glass sjg Accepted
[U-Boot] test/py: put "Starting U-Boot" into separate log section 1 - - - 0 0 0 2016-02-11 Stephen Warren trini Accepted
[U-Boot] arm: socfpga: Fix ethernet reset handling - - - 2 0 0 0 2016-02-11 Marek Vasut jhersh Accepted
[U-Boot] arm: socfpga: Remove bashisms from qts filter - - 1 - 0 0 0 2016-02-11 Marek Vasut marex Accepted
[U-Boot,2/2] arm: socfpga: cv_socdk: Add support for QSPI boot - - 1 - 0 0 0 2016-02-11 Marek Vasut marex Accepted
[U-Boot,1/2] arm: socfpga: av_socdk: Add support for QSPI boot - - 1 - 0 0 0 2016-02-11 Marek Vasut marex Accepted
[U-Boot] arm: at91: Add support for DENX MA5D4 SoM and EVK - - 2 - 0 0 0 2016-02-11 Marek Vasut abiessmann Accepted
[U-Boot] arm: socfpga: Add missing CONFIG_BUILD_TARGET - - - - 0 0 0 2016-02-11 Marek Vasut marex Accepted
[U-Boot] drivers/crypto/fsl: correct error checking in run_descriptor - - - - 0 0 0 2016-02-11 Aneesh Bansal yorksun Accepted
[U-Boot] test/py: handle exceptions in console creation 1 - - - 0 0 0 2016-02-10 Stephen Warren trini Accepted
[U-Boot,V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS 1 - 2 - 0 0 0 2016-02-10 Stephen Warren trini Accepted
[U-Boot] test/py: print summary in test order 1 - - - 0 0 0 2016-02-10 Stephen Warren trini Accepted
[U-Boot] test/py: fix CONFIG_SPL test 1 - - - 0 0 0 2016-02-10 Stephen Warren trini Accepted
[U-Boot,v5,17/32] spi: Drop SPI_RX_FAST - - - - 0 0 0 2016-02-10 Jagan Teki jagan Accepted
[U-Boot,2/2] arm: mx6: Add CCV xPress board support - - - - 0 0 0 2016-02-10 Stefan Roese sbabic Accepted
[U-Boot,1/2] arm: mx6: Add UART8 base address for i.MX6UL - - - - 0 0 0 2016-02-10 Stefan Roese sbabic Accepted
[U-Boot] sunxi: H3: Add support for the host usb-phys - - - - 0 0 0 2016-02-10 Hans de Goede jwrdegoede Accepted
[U-Boot,V2] OMAP3_logic: Add NAND args to boot UBIFS - - 1 - 0 0 0 2016-02-10 Adam Ford trini Accepted
[U-Boot,2/2] net: phy: marvell: Fix problem with phy_reset() clearing BMCR 1 - - - 0 0 0 2016-02-10 Stefan Roese jhersh Accepted
[U-Boot,1/2] net: phy: marvell: Call phy_reset() where possible 1 - - - 0 0 0 2016-02-10 Stefan Roese jhersh Accepted
[U-Boot] am43xx: qspi: Fix config to select SPI mode - - 2 - 0 0 0 2016-02-10 Vignesh R trini Accepted
[U-Boot] ARM : DRA7: Switch QSPI to use MODE-0 at 64MHz - - 1 - 0 0 0 2016-02-10 Vignesh R trini Accepted
[U-Boot] Please pull u-boot-dm - - - - 0 0 0 2016-02-09 Simon Glass trini Accepted
[U-Boot] sunxi: power: add support for sy8106a driver 1 - - 1 0 0 0 2016-02-09 Hans de Goede jwrdegoede Accepted
[U-Boot] Revert "common/memsize.c: Simplify RAM size detection" - - - - 0 0 0 2016-02-09 Hans de Goede trini Accepted
[U-Boot,v2,2/2] fastboot: sparse: remove unnecessary logging 1 - - - 0 0 0 2016-02-09 Steve Rae trini Accepted
[U-Boot,v2,1/2] fastboot: sparse: fix block addressing for don't care chunk type 1 - - - 0 0 0 2016-02-09 Steve Rae trini Accepted
[U-Boot] board: tbs2910: Fix eMMC BOOTCFG value - - - - 0 0 0 2016-02-09 Soeren Moch sbabic Accepted
[U-Boot,4/4] arm: VCMA9: because of NOR flash space constrains, activate THUMB build mode - - - - 0 0 0 2016-02-09 David Müller (ELSOFT AG) trini Accepted
[U-Boot,3/4] arm: build some file(s) as ARM mode only - - - - 0 0 0 2016-02-09 David Müller (ELSOFT AG) trini Accepted
[U-Boot,2/4] arm: the ARM920T is THUMB capable, so select the appropriate ISA - - - - 0 0 0 2016-02-09 David Müller (ELSOFT AG) trini Accepted
[U-Boot,1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB) - - - - 0 0 0 2016-02-09 David Müller (ELSOFT AG) trini Accepted
[U-Boot] ARM: uniphier: drop unnecessary "bootm_low" environment define - - - - 0 0 0 2016-02-09 Masahiro Yamada masahir0y Accepted
[U-Boot] Fix variable documented in README.distro for PXE address. - - 1 - 0 0 0 2016-02-09 Vagrant Cascadian trini Accepted
[U-Boot] OMAP3LOGIC: Update maintainer 1 - - - 0 0 0 2016-02-09 Adam Ford trini Accepted
[U-Boot,2/2] Enable test/py for sandbox in Travis CI 1 - 2 - 0 0 0 2016-02-09 Stephen Warren trini Accepted
[U-Boot,1/2] test/py: don't import pexpect 1 - - - 0 0 0 2016-02-09 Stephen Warren trini Accepted
[U-Boot] OMAP3: omap3_logic: Grow SPL to 64K from 54K - - 1 - 0 0 0 2016-02-09 Adam Ford trini Accepted
[U-Boot,RFC,v1,1/2] arm: ls1021aqds: Convert to driver model and enable serial support - - 2 - 0 0 0 2016-02-09 York Sun yorksun Accepted
[U-Boot] test/py: add docs for gdbserver and pytest options 1 - - - 0 0 0 2016-02-08 Stephen Warren trini Accepted
[U-Boot,V3,2/2] test/py: run all "ut" subtests 1 - - 1 0 0 0 2016-02-08 Stephen Warren trini Accepted
[U-Boot,V3,1/2] Makefile: generate symbol list from u-boot 1 - - - 0 0 0 2016-02-08 Stephen Warren trini Accepted
[U-Boot] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT - - 1 - 0 0 0 2016-02-08 Derald D. Woods trini Accepted
[U-Boot,v2,03/18] mmc: Add support for Qualcomm SDHCI controller - - 1 1 0 0 0 2016-02-07 Mateusz Kulikowski trini Accepted
[U-Boot] sniper: Drop references to P970 - - 1 - 0 0 0 2016-02-07 Paul Kocialkowski trini Accepted
[U-Boot,2/2] video: tegra: Enable the 'lcd' env variable work-around 1 - - - 0 0 0 2016-02-06 Simon Glass ag Accepted
[U-Boot,1/2] dm: video: Add a temporary work-around for old stdout var 1 - - 1 0 0 0 2016-02-06 Simon Glass ag Accepted
[U-Boot] Pull request: u-boot-staging - - - - 0 0 0 2016-02-06 Anatolij Gustschin trini Accepted
[U-Boot] video: bcm2835: use bus_to_phys() on FB address - - - - 0 0 0 2016-02-06 Stephen Warren ag Accepted
[U-Boot,v3] net: davinci_emac: fix NULL check after pointer dereference 1 - 1 - 0 0 0 2016-02-06 Anatolij Gustschin ag Accepted
[U-Boot] net: fix wrong initialization in davinci-emac driver 1 - - - 0 0 0 2016-02-06 Anatolij Gustschin ag Accepted
[U-Boot,PULL] Please pull u-boot-nios/master - - - - 0 0 0 2016-02-06 Thomas Chou trini Accepted
[U-Boot,5/5] s3c24xx: serial: Remove dead code - - - - 0 0 0 2016-02-06 David Müller (ELSOFT AG) trini Accepted
[U-Boot,4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW ... - - - - 0 0 0 2016-02-06 David Müller (ELSOFT AG) trini Accepted
[U-Boot,3/5] Remove unused CONFIG_HWFLOW option and associated dead code. - - - - 0 0 0 2016-02-06 David Müller (ELSOFT AG) trini Accepted
[U-Boot,2/5] Remove unused CONFIG_CMD_HWFLOW option and associated dead code. - - - - 0 0 0 2016-02-06 David Müller (ELSOFT AG) trini Accepted
[U-Boot,1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code. - - - - 0 0 0 2016-02-06 David Müller (ELSOFT AG) trini Accepted
[U-Boot,v2,4/5] x86: ivybridge: bd82x6x: Support FSP enabled configuration - - 1 - 0 0 0 2016-02-06 Bin Meng bmeng Accepted
[U-Boot,v2,3/5] x86: fsp: Make sure HOB list is not overwritten by U-Boot 1 - - 1 0 0 0 2016-02-06 Bin Meng bmeng Accepted
[U-Boot,v2,2/5] superio: Add SMSC SIO1007 driver - - 1 - 0 0 0 2016-02-06 Bin Meng bmeng Accepted
[U-Boot,v2,1/5] x86: ivybridge: Add FSP support 1 - - 1 0 0 0 2016-02-06 Bin Meng bmeng Accepted
[U-Boot,2/2] ARM: rpi: set fdt_high in the default environment - - - - 0 0 0 2016-02-06 Stephen Warren trini Accepted
[U-Boot,1/2] ARM: rpi: update memory layout env. var. documentation - - - - 0 0 0 2016-02-06 Stephen Warren trini Accepted
[U-Boot,v2] Use correct spelling of "U-Boot" - - 3 - 0 0 0 2016-02-06 Bin Meng ag Accepted
[U-Boot,V2,2/2] test/py: capture the entire U-Boot version at boot 1 - - 1 0 0 0 2016-02-06 Stephen Warren sjg Accepted
[U-Boot,V2,1/2] test/py: fix off-by-one error in spawn matching code 1 - - 1 0 0 0 2016-02-06 Stephen Warren sjg Accepted
[U-Boot,v3] arm: use common instructions applicable to armv7m & other arm archs - - 2 - 0 0 0 2016-02-05 Vikas Manocha trini Accepted
[U-Boot,v2,3/3] imx: mx6quq7: add sd card detection - - - - 0 0 0 2016-02-05 Julien Corjon sbabic Accepted
[U-Boot,v2,2/3] imx: mx6quq7: specify max_bus_witdh directly in usdhc_cfg - - - - 0 0 0 2016-02-05 Julien Corjon sbabic Accepted
[U-Boot,v2,1/3] imx: mx6quq7: fix USDHC4 declaration 1 - - - 0 0 0 2016-02-05 Julien Corjon sbabic Accepted
[U-Boot] board_r: fix a typo in comment block - - 2 - 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot,v3,3/3] kbuild: fix build rule of u-boot-spl.dtb - - 1 - 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot,v3,2/3] kbuild: add missing FORCE where $(call if_changed, ) is used - - 1 - 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot,v3,1/3] kbuild: remove unneeded ifdef conditionals around build rules - - 1 - 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot] image: fix getenv_bootm_size() function again - - - 2 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot,v2,4/4] kbuild: fix build rule of u-boot-spl.dtb - - - - 0 0 0 2016-02-05 Masahiro Yamada trini Accepted
[U-Boot] Please pull u-boot-x86 - - - - 0 0 0 2016-02-05 Bin Meng trini Accepted
[U-Boot] armv7: ls102xa: Move smmu and stream id initialization into the common soc code - - - - 0 0 0 2016-02-05 Alison Wang yorksun Accepted
[U-Boot] ARM: uniphier: adjust DDR clock delay line for ProXstream2 - - - - 0 0 0 2016-02-05 Masahiro Yamada masahir0y Accepted
[U-Boot,v2,2/2] ARM: uniphier: move cmd_ddrmphy.c to fix build error - - - - 0 0 0 2016-02-05 Masahiro Yamada masahir0y Accepted
[U-Boot,v2,1/2] ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.c - - - - 0 0 0 2016-02-05 Masahiro Yamada masahir0y Accepted
[U-Boot,v5,4/4] board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLC - - - - 0 0 0 2016-02-05 Zhao Qiang yorksun Accepted
« 1 2 ... 157 158 159810 811 »