| [U-Boot,2/3] BeagleBoard: Added userbutton command |
2011-08-16 |
Joel Fernandes |
spaulraj |
Accepted |
| [U-Boot,1/3] BeagleBoard: turn off clocks in ehci_stop |
2011-08-16 |
Joel Fernandes |
spaulraj |
Accepted |
| [U-Boot] beagle-asm/arch/gpio.h to asm/omap_gpio.h |
2011-08-15 |
Rodrigo L. Rosa |
|
Changes Requested |
| [U-Boot] mpc83xx: fix global timer structure definition |
2011-08-15 |
Kim Phillips |
kimphill |
Accepted |
| [U-Boot] sf: winbond: add support for W25X40 parts |
2011-08-14 |
Mike Frysinger |
wd |
Rejected |
| [U-Boot,u-boot] tftp: Remove command repetition. |
2011-08-14 |
Marek Belisko |
|
Rejected |
| [U-Boot,v6,4/4] mpc8313erdb: Enable GPIO support on the MPC8313E RDB |
2011-08-13 |
Joe Hershberger |
kimphill |
Accepted |
| [U-Boot,v6,3/4] mpc83xx: Add a GPIO driver for the MPC83XX family |
2011-08-13 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v6,2/4] gpio: Modify common gpio.h to more closely match Linux |
2011-08-13 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v6,1/4] gpio: Move common gpio.h to include/asm-generic |
2011-08-13 |
Joe Hershberger |
kimphill |
Accepted |
| [U-Boot,v2,4/4] powerpc/mpc83xx: Cleanup usage of LBC constants |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v2,3/4] powerpc/mpc83xx: Cleanup usage of DDR constants |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v2,2/4] powerpc/mpx83xx: Cleanup usage of BAT constants |
2011-08-12 |
Joe Hershberger |
kimphill |
Accepted |
| [U-Boot,v2,1/4] powerpc/mpc83xx: Whitespace changes |
2011-08-12 |
Joe Hershberger |
kimphill |
Accepted |
| [U-Boot,GIT,PULL] Pull request: u-boot-imx |
2011-08-12 |
Stefano Babic |
|
Accepted |
| [U-Boot,8/8,v6] integrator: convert to new build system |
2011-08-12 |
Linus Walleij |
aaribaud |
Accepted |
| [U-Boot,2/2] i2c:gpio:s5p: Enable I2C GPIO on the GONI target |
2011-08-12 |
Łukasz Majewski |
prom |
Changes Requested |
| [U-Boot,1/2,v4] i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c) |
2011-08-12 |
Łukasz Majewski |
prom |
Changes Requested |
| [U-Boot] armv7:cache: D cache line size read method |
2011-08-12 |
Łukasz Majewski |
|
Superseded |
| [U-Boot,v5,3/3] mpc8313erdb: Enable GPIO support on the MPC8313E RDB |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v5,2/3] mpc83xx: Add a GPIO driver for the MPC83XX family |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v5,1/3] gpio: Move common gpio.h to include/asm-generic |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot] powerpc/mpc83xx: Cleanup usage of LBC and DDR constants |
2011-08-12 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,2/2] powerpc/p1023rds: Enable nand node and disable nor node |
2011-08-12 |
Chunhe Lan |
|
Superseded |
| [U-Boot,1/2] fdt: Add a fdt_set_node_status function |
2011-08-12 |
Chunhe Lan |
|
Superseded |
| [U-Boot,v4] USB: Add align(4) in __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor |
2011-08-11 |
Joel Fernandes |
rbohmer |
Awaiting Upstream |
| [U-Boot,1/1,V2] add support for mcf5307 cpu |
2011-08-11 |
angelo dureghello |
|
Superseded |
| [U-Boot,v2] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings |
2011-08-11 |
Joel Fernandes |
spaulraj |
Awaiting Upstream |
| [U-Boot,v4] powerpc/eeprom: cleanup mac command |
2011-08-11 |
York Sun |
|
Changes Requested |
| [U-Boot,v3] powerpc/eeprom: cleanup mac command |
2011-08-11 |
York Sun |
|
Superseded |
| [U-Boot,6/7] omap-common: Add NAND SPL linux booting |
2011-08-11 |
Simon Schwarz |
|
Superseded |
| [U-Boot,v3,4/4] armv7: cache: remove flush on un-aligned invalidate |
2011-08-11 |
Aneesh V |
aaribaud |
Accepted |
| [U-Boot,v3,3/4] armv7: stronger barrier for cache-maintenance operations |
2011-08-11 |
Aneesh V |
aaribaud |
Accepted |
| [U-Boot,v3,2/4] omap: enable caches at system start-up |
2011-08-11 |
Aneesh V |
aaribaud |
Accepted |
| [U-Boot] beagleboard: add support for xM revision C |
2011-08-11 |
Joel Fernandes |
spaulraj |
Awaiting Upstream |
| [U-Boot] beagle: pass expansionboard name in bootargs |
2011-08-11 |
Joel Fernandes |
|
Accepted |
| [U-Boot] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings |
2011-08-11 |
Joel Fernandes |
trini |
Not Applicable |
| [U-Boot,v2] OMAP3 Beagle Pin Mux initialization glitch fix |
2011-08-11 |
Joel Fernandes |
spaulraj |
Not Applicable |
| [U-Boot] OMAP3 Beagle Pin Mux initialization glitch fix |
2011-08-11 |
Joel Fernandes |
|
Not Applicable |
| [U-Boot] arm: a320: fix broken timer |
2011-08-11 |
Po-Yu Chuang |
|
Accepted |
| [U-Boot] powerpc/mpc83xx: Rename CONFIG_SYS_DDR_CONFIG to CONFIG_SYS_DDR_CS_CONFIG |
2011-08-10 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,9/9] arm920t: Fix jump to the relocated board_init_r |
2011-08-10 |
Eric Jarrige |
aaribaud |
Superseded |
| [U-Boot,8/9] DM9000: change some printf to use debug instead |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,7/9] mx1: change a printf in speed.c to use debug instead |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,6/9] mx1: improve PLL freq computation |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,5/9] apf9328: add default board configuration file |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,4/9] apf9328: add apf9328 board in Makefile |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,3/9] apf9328: Add Armadeus Project board APF9328 |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,2/9] mx1: add i2c registers |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,1/9] mx1: export imx_gpio_mode() function |
2011-08-10 |
Eric Jarrige |
sbabic |
Changes Requested |
| [U-Boot,3/3] add mcf5307 support |
2011-08-10 |
angelo dureghello |
jasonjin |
Changes Requested |
| [U-Boot,2/3] add mcf5307 support |
2011-08-10 |
angelo dureghello |
jasonjin |
Changes Requested |
| [U-Boot,1/3] add mcf5307 support |
2011-08-10 |
angelo dureghello |
jasonjin |
Changes Requested |
| [U-Boot,RFC] fastboot gadget support |
2011-08-10 |
Sebastian Siewior |
|
RFC |
| [U-Boot,v2] powerpc/eeprom: cleanup mac command |
2011-08-10 |
York Sun |
|
Superseded |
| [U-Boot] OpenRD Ultimate SATA & SD |
2011-08-10 |
Philip Hands |
|
Not Applicable |
| [U-Boot,v5,2/2] gpio: Add GPIO driver for Marvell SoC Armada100 |
2011-08-10 |
Ajay Bhargav |
|
Superseded |
| [U-Boot,v5,1/2] gpio: Add GPIO driver framework for Marvell SoCs |
2011-08-10 |
Ajay Bhargav |
|
Superseded |
| [U-Boot,v2,8/8] da850: modifications for Logic PD Rev.3 AM18xx EVM |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Accepted |
| [U-Boot,v2,7/8] da850: fix the channel number for EMAC teardown init |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v2,6/8] da850: add support for Spectrum Digital AM18xx EVM |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v2,5/8] da850: add support to wake up DSP during board init |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Accepted |
| [U-Boot,v2,4/8] da850: modify the U-Boot prompt string |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v2,3/8] da850: add NOR boot mode support |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v2,2/8] da8xx: add support for multiple PLL controllers |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v2,1/8] da850: indicate cache usage disable in config file |
2011-08-10 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,v3] i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c) |
2011-08-10 |
Łukasz Majewski |
prom |
Changes Requested |
| [U-Boot] gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal) |
2011-08-10 |
Łukasz Majewski |
prom |
Accepted |
| [U-Boot,v4,2/2] gpio: Add GPIO driver for Marvell SoC Armada100 |
2011-08-10 |
Ajay Bhargav |
|
Superseded |
| [U-Boot,v4,1/2] gpio: Add GPIO driver framework for Marvell SoCs |
2011-08-10 |
Ajay Bhargav |
|
Superseded |
| [U-Boot] tsec: Configure the buffer descriptor bases to always include all of the descriptors |
2011-08-10 |
Joe Hershberger |
|
Rejected |
| [U-Boot,v3] mips32: fix wrong loop bound in flush_cache() |
2011-08-10 |
Yao Cheng |
|
Accepted |
| [U-Boot] gpio: Expand cmd_gpio functionality and script friendliness |
2011-08-10 |
Joe Hershberger |
|
Rejected |
| [U-Boot] omap4_panda: Enable command-line editing and hush shell by default on panda board |
2011-08-10 |
Joe Hershberger |
trini |
Not Applicable |
| [U-Boot] omap4_panda: Ignore omap4 SPL called MLO |
2011-08-10 |
Joe Hershberger |
aaribaud |
Accepted |
| [U-Boot,2/2] omap4_panda: Build in cmd_gpio support on panda |
2011-08-10 |
Joe Hershberger |
|
Superseded |
| [U-Boot,1/2] omap3+: Add OMAP support for cmd_gpio |
2011-08-10 |
Joe Hershberger |
|
Superseded |
| [U-Boot,v4,3/3] mpc8313erdb: Enable GPIO support on the MPC8313E RDB |
2011-08-10 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v4,2/3] mpc83xx: Add a GPIO driver for the MPC83XX family |
2011-08-10 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,v4,1/3] gpio: Move common gpio.h to include/asm-generic |
2011-08-10 |
Joe Hershberger |
kimphill |
Superseded |
| [U-Boot,V3] NAND: Allow per-buffer allocation |
2011-08-10 |
Marek Vasut |
|
Superseded |
| [U-Boot,V2] NAND: Allow per-buffer allocation |
2011-08-09 |
Marek Vasut |
|
Superseded |
| [U-Boot] NAND: Allow per-buffer allocation |
2011-08-09 |
Marek Vasut |
|
Superseded |
| [U-Boot,7/7] powerpc/8xxx: Add support for interactive DDR programming interface |
2011-08-09 |
York Sun |
|
Superseded |
| [U-Boot,6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver |
2011-08-09 |
York Sun |
|
Superseded |
| [U-Boot,5/7] powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver |
2011-08-09 |
York Sun |
|
Accepted |
| [U-Boot,4/7] powerpc/mpc8xxx: Add DDR2 to unified DDR driver |
2011-08-09 |
York Sun |
galak |
Superseded |
| [U-Boot,3/7] powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps() |
2011-08-09 |
York Sun |
galak |
Accepted |
| [U-Boot,2/7] powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots |
2011-08-09 |
York Sun |
galak |
Accepted |
| [U-Boot,1/7] powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en |
2011-08-09 |
York Sun |
galak |
Accepted |
| [U-Boot,v2] mkimage: Fix 'Unknown OMAP image type - 5' |
2011-08-09 |
Dirk Behme |
aaribaud |
Accepted |
| [U-Boot,3/3] omap4: IO settings |
2011-08-09 |
Aneesh V |
|
Superseded |
| [U-Boot,2/3] omap4: make SDRAM init work for ES1.0 silicon |
2011-08-09 |
Aneesh V |
|
Superseded |
| [U-Boot,1/3] omap4: factor out common part from board config headers |
2011-08-09 |
Aneesh V |
|
Superseded |
| [U-Boot] CPCI750: Add CPCI-HD/2 support |
2011-08-09 |
Reinhard Arlt |
|
Superseded |
| [U-Boot] new tool mkenvimage: generates an env image from an arbitrary config file |
2011-08-09 |
David Wagner |
|
Changes Requested |
| [U-Boot,v2] drivers: add the support for Silicon Image SATA controller |
2011-08-09 |
tang yuantian |
|
Superseded |
| [U-Boot,1/2,v2] powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014 |
2011-08-08 |
Kumar Gala |
galak |
Accepted |
| [U-Boot] Pull request: u-boot-usb |
2011-08-08 |
Remy Bohmer |
|
Accepted |
| [U-Boot,2/2] fat: cannot compare bytes and sectors |
2011-08-08 |
Sergei Shtylyov |
|
Accepted |
