| [U-Boot,08/15] iMX28: Add APBH DMA driver |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,07/15] iMX28: Add SPI driver |
2011-09-12 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,06/15] iMX28: Add GPIO control |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,05/15] iMX28: Add I2C bus driver |
2011-09-12 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,04/15] iMX28: Add PINMUX control |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,03/15] FEC: Add support for iMX28 quirks |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,02/15] iMX28: Add SSP MMC driver |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,01/15] iMX28: Initial support for iMX28 CPU |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,11/11] FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h |
2011-09-12 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,10/11] FEC: Squish "got MAC from fuse" message, make it debug() |
2011-09-12 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,09/11] FEC: Add timeout for chip reset |
2011-09-12 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,08/11] FEC: Allow registering MII postconfiguration callback |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,07/11] FEC: Allow multiple FECes |
2011-09-12 |
Marek Vasut |
sbabic |
Changes Requested |
| [U-Boot,06/11] FEC: Abstract access to fec->eth in MII operations |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,05/11] FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,04/11] FEC: Add RMII mode support |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,03/11] FEC: Kill mode select FIXME's |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,02/11] FEC: Use defined constant instead of magic number |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,01/11] FEC: Use proper accessor to read register in debug call |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,5/5] NAND: Add scrub.quiet command option |
2011-09-12 |
Marek Vasut |
scottwood |
Superseded |
| [U-Boot,4/5] NAND: Make page, erase, oob size available via cmd_nand |
2011-09-12 |
Marek Vasut |
scottwood |
Superseded |
| [U-Boot,3/5] NAND: Allow per-buffer allocation |
2011-09-12 |
Marek Vasut |
scottwood |
Deferred |
| [U-Boot,2/5] NAND: Add nand read.raw and write.raw commands |
2011-09-12 |
Marek Vasut |
scottwood |
Superseded |
| [U-Boot,1/5] NAND: Really ignore bad blocks when scrubbing |
2011-09-12 |
Marek Vasut |
scottwood |
Accepted |
| [U-Boot,2/2,RESEND] SPL: Allow user to disable CPU support library |
2011-09-12 |
Marek Vasut |
|
Accepted |
| [U-Boot,1/2,RESEND] SPL: Make path to start.S configurable |
2011-09-12 |
Marek Vasut |
|
Accepted |
| [U-Boot,2/2] SPL: Allow user to disable CPU support library |
2011-09-12 |
Marek Vasut |
|
Accepted |
| [U-Boot,1/2] SPL: Make path to start.S configurable |
2011-09-12 |
Marek Vasut |
|
Accepted |
| [U-Boot,V2] ARM: Update mach-types |
2011-09-12 |
Marek Vasut |
|
Accepted |
| [U-Boot] ARM: versatile: delete split_by_variant.sh |
2011-09-11 |
Linus Walleij |
|
Accepted |
| [U-Boot] led: remove camelcase in LED functions from assembly |
2011-09-11 |
Kridner, Jason |
|
Changes Requested |
| [U-Boot,v6] dreamplug: initial board support. |
2011-09-11 |
u-boot@lakedaemon.net |
|
Superseded |
| [U-Boot,v2] BeagleBoard: Remove userbutton command and use gpio command instead |
2011-09-11 |
Joel Fernandes |
|
Changes Requested |
| [U-Boot] BeagleBoard: Remove userbutton command and use gpio command instead |
2011-09-11 |
Joel Fernandes |
trini |
Accepted |
| [U-Boot] ARM: hawkboard: fix compilation of nand_spl |
2011-09-10 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,1/1,V3] add support for mcf5307 cpu |
2011-09-10 |
angelo dureghello |
|
Superseded |
| [U-Boot] cm4008, cm41xx: fix build warnings |
2011-09-10 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] Improve output of bootm command |
2011-09-10 |
Andrew Murray |
|
Rejected |
| [U-Boot] tegra2: fix warning: "assert" redefined |
2011-09-10 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] utx8245: fix build breakage due to assert() |
2011-09-10 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,v2,2/7] Add macros for recording init calls during UBoot execution |
2011-09-10 |
Andrew Murray |
|
Changes Requested |
| [U-Boot,v2,7/7] Add documentation for bootgraph.pl |
2011-09-10 |
Andrew Murray |
|
Deferred |
| [U-Boot,v2,6/7] Add bootgraph instrumentation for UBoot commands |
2011-09-10 |
Andrew Murray |
|
Changes Requested |
| [U-Boot,v2,5/7] Add bootgraph instrumentation for bootm command |
2011-09-10 |
Andrew Murray |
|
Deferred |
| [U-Boot,v2,4/7] Add bootgraph instrumentation for ARM boards |
2011-09-10 |
Andrew Murray |
|
Changes Requested |
| [U-Boot,v2,3/7] Add timing information to printf's for use with bootgraph.pl |
2011-09-10 |
Andrew Murray |
|
Changes Requested |
| [U-Boot,v2,2/7] Add macros for recording init calls during UBoot execution |
2011-09-10 |
Andrew Murray |
|
Changes Requested |
| [U-Boot,v2,1/7] Add bootgraph.pl script for generating a boot graph SVG file |
2011-09-10 |
Andrew Murray |
wd |
Changes Requested |
| [U-Boot] KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH |
2011-09-10 |
Greg Ungerer |
|
Accepted |
| [U-Boot] CM41xx: fix signedness of env bootargs string pointer |
2011-09-10 |
Greg Ungerer |
|
Accepted |
| [U-Boot] CM4008: fix signedness of env bootargs string pointer |
2011-09-10 |
Greg Ungerer |
|
Accepted |
| [U-Boot] UBIFS: fix warning: format '%lX' expects type 'long unsigned int' |
2011-09-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] Fix warning: "assert" redefined |
2011-09-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] ORIGEN : enable device tree support |
2011-09-09 |
Angus Ainslie |
prom |
Accepted |
| [U-Boot] ORIGEN : use absolute paths for tools directory |
2011-09-09 |
Angus Ainslie |
prom |
Changes Requested |
| [U-Boot] Please pull u-boot-ti/master |
2011-09-09 |
Sandeep Paulraj |
|
Accepted |
| [U-Boot] mx31pdk: Remove board config.mk file |
2011-09-09 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] Please pull u-boot-mpc85xx |
2011-09-09 |
Kumar Gala |
|
Accepted |
| [U-Boot,V2] ARM: hawkboard_nand: fix compilation of nand_spl |
2011-09-09 |
Stefano Babic |
|
Accepted |
| [U-Boot] CM4000: fix broken flash base for OpenGear boards |
2011-09-09 |
Greg Ungerer |
|
Accepted |
| [U-Boot] CM4000: fix missing RAM definitions for OpenGear boards |
2011-09-09 |
Greg Ungerer |
|
Accepted |
| [U-Boot] KS8695: move TIMER_ definitions before code use |
2011-09-09 |
Greg Ungerer |
|
Accepted |
| [U-Boot] MPC512x FEC/MII |
2011-09-09 |
Schneider, Kolja |
dzu |
Rejected |
| [U-Boot] ARM: hawkboard_nand: fix compilation of nand_spl |
2011-09-09 |
Stefano Babic |
|
Changes Requested |
| [U-Boot] ARM: hawkboard: fix compilation of nand_spl |
2011-09-09 |
Stefano Babic |
|
Superseded |
| [U-Boot] ARM: hawkboard: fix compilation of nand_spl |
2011-09-09 |
Stefano Babic |
|
Changes Requested |
| [U-Boot] powerpc/85xx: Add support for setting up RAID engine liodns on P5020 |
2011-09-08 |
Kumar Gala |
galak |
Superseded |
| [U-Boot,v2] OMAP3: Overo: Update GPMC timing for ethernet chip. |
2011-09-08 |
Philip Balister |
|
Accepted |
| [U-Boot] some USB cleanup on EfikaMX |
2011-09-08 |
Jana Rapava |
|
Changes Requested |
| [U-Boot,31/31] M28: Add doc/README.m28 documentation |
2011-09-08 |
Marek Vasut |
|
Accepted |
| [U-Boot,30/31] i.MX28: Add u-boot.sb target to Makefile |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,29/31] M28: Add NAND update scripts |
2011-09-08 |
Marek Vasut |
|
Superseded |
| [U-Boot,28/31] iMX28: Add image header generator tool |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,27/31] M28: Save environment in NAND |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,26/31] M28: Enable UBI and UBIFS |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,25/31] M28: Enable the internal RTC instead of the M41T62 |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,24/31] iMX28: Add driver for internal RTC |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,23/31] M28: Enable NAND |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,22/31] iMX28: Add GPMI NAND driver |
2011-09-08 |
Marek Vasut |
|
Superseded |
| [U-Boot,21/31] iMX28: Add BCH and GPMI register definitions |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,20/31] iMX28: Add APBH DMA driver |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,19/31] M28EVK: Enable SPI and SPI flash |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,18/31] iMX28: Add SPI driver |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,17/31] M28: Enable use of GPIO configurators |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,16/31] iMX28: Add GPIO control |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,15/31] M28: Enable MMC SPL |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,14/31] iMX28: Add MMC SPL |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,13/31] M28: Enable I2C, EEPROM and RTC |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,12/31] iMX28: Add I2C bus driver |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,11/31] iMX28: Add I2C register definitions |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,10/31] iMX28: Add RTC register definitions |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,09/31] iMX28: Add PINMUX control |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,08/31] M28EVK: Enable FEC0 and FEC1 |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,07/31] iMX28: Add CPU-specific FEC ethernet init |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,06/31] FEC: Add support for iMX28 quirks |
2011-09-08 |
Marek Vasut |
|
Accepted |
| [U-Boot,05/31] iMX28: Add pinctrl and ocotp register definitions |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,04/31] M28EVK: Enable MMC support |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,03/31] iMX28: Add support for SSP MMC |
2011-09-08 |
Marek Vasut |
|
Superseded |
| [U-Boot,02/31] iMX28: Add basic support for DENX M28EVK board |
2011-09-08 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,01/31] iMX28: Initial support for iMX28 CPU |
2011-09-08 |
Marek Vasut |
|
Changes Requested |