| [U-Boot,v3] AVR32: fix timer_init() function |
2015-10-04 |
Sven Schnelle |
ag |
Changes Requested |
| [U-Boot] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 |
2013-05-21 |
Piotr Wilczek |
|
New |
| [U-Boot] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-05-21 |
Piotr Wilczek |
|
New |
| [U-Boot,V2] drivers:power:max77686: add function to set voltage and mode |
2013-05-21 |
Piotr Wilczek |
|
New |
| [U-Boot] arm: pxa: config option for PXA270 turbo mode |
2013-05-21 |
Sergey Yanovich |
|
New |
| [U-Boot,PULL] please pull u-boot-atmel/master |
2013-05-21 |
Andreas Bießmann |
|
New |
| [U-Boot,U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards |
2013-05-21 |
Jagannadha Sutradharudu Teki |
|
New |
| [U-Boot,v3,6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v3,5/6] arm: mvf600: Add uart support for Vybrid MVF600 |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v3,4/6] arm: mvf600: Add watchdog support for Vybrid MVF600 |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v3,3/6] net: fec_mxc: Add support for Vybrid MVF600 |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v3,2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600 |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v3,1/6] arm: mvf600: Add Vybrid MVF600 CPU support |
2013-05-21 |
Alison Wang |
|
New |
| [U-Boot,v03,2/2] OMAP5: add ABB setup for MPU voltage domain |
2013-05-21 |
Andrii Tseglytskyi |
|
New |
| [U-Boot,v03,1/2] OMAP3+: introduce generic ABB support |
2013-05-21 |
Andrii Tseglytskyi |
|
New |
| [U-Boot] cmd_mem: fix cp command |
2013-05-21 |
Masahiro Yamada |
|
New |
| [U-Boot] arm: pxa: PXA270 D-Cache as ram |
2013-05-20 |
Sergey Yanovich |
|
New |
| [U-Boot] arm: pxa: config option for PXA270 turbo mode |
2013-05-20 |
Sergey Yanovich |
|
New |
| [U-Boot,v2] arm: pxa: Add support for ICP DAS LP-8x4x |
2013-05-20 |
Sergey Yanovich |
|
New |
| [U-Boot] tools/fw_env: use fsync to ensure that data is physically stored |
2013-05-20 |
Michael Heimpold |
|
New |
| [U-Boot,2/2] common: Use separate dirs for each board for ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,1/2] common: Add CCACHE variable to allow use of ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,V2,OMAP-ULPI] : This patch fix the omap access to the transceiver configuration registers using the ulpi bus. |
2013-05-20 |
Michael Trimarchi |
|
New |
| [U-Boot,6/6] powerpc/p1022ds: boot from SD Card with SPL |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,5/6] spl: Make CONFIG_SPL_BUILD contain more functionality |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,4/6] Makefile: move the common makefile line to public area |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot,1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script |
2013-05-20 |
ying.zhang@freescale.com |
|
New |
| [U-Boot] ppc: ppmc7xx: Fix possible out-of-bound access |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot] disk: Fix possible out-of-bounds access in part_efi.c |
2013-05-19 |
Marek Vasut |
|
New |
| [U-Boot,v4,4/4] arm: factorize relocate_code routine |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,v4,3/4] arm: do not compile relocate_code() for SPL builds |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,v4,2/4] tx25: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,v4,1/4] mx31pdk: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot] Fix device detection for API consumers |
2013-05-19 |
Ilya Bakulin |
|
New |
| [U-Boot,v4,10/10] arm/km: fix u-boot update functionality |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,09/10] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,08/10] tegra: i2c: Enable new CONFIG_SYS_I2C framework |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,07/10] tegra: i2c: Add function to know about current bus |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,06/10] i2c, multibus, keymile: get rid of EEprom_ivm envvariable |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,05/10] i2c, multibus: get rid of CONFIG_I2C_MUX |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,04/10] i2c, fsl_i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,03/10] i2c, soft-i2c: switch to new multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
|
New |
| [U-Boot,v4,02/10] i2c: common changes for multibus/multiadapter support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v4,01/10] i2c: add i2c_core and prepare for new multibus support |
2013-05-18 |
Heiko Schocher |
hs |
Under Review |
| [U-Boot,v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 |
2013-05-18 |
Scott Wood |
|
New |
| [U-Boot,2/2] ARM: tegra: support SKU 7 of Tegra20 |
2013-05-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,1/2] ARM: tegra: support SKU 1 of Tegra114 |
2013-05-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,v02,1/2] OMAP3+: introduce generic ABB support |
2013-05-17 |
Nishanth Menon |
|
Changes Requested |
| [U-Boot,v3,12/12] board:smdk5250: switch to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,11/12] board:VCMA9 switch to ne i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,10/12] samsung: trats2: add support for new board Trats2 |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,09/12] drivers:lcd: fix unaligned access on lcd |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,08/12] drivers:video:s6e8ax0: change data_to_send array to static |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,06/12] drivers:power:power_i2c: adapt file to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,05/12] power: fix pmic command |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,04/12] i2c:multi_i2c: adapt file to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,02/12] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,v3,01/12] pmic:max77686: add function to set voltage and mode |
2013-05-17 |
Piotr Wilczek |
prom |
Under Review |
| [U-Boot,2/2,V2] EXYNOS: SPI: Support a delay after deactivate |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2,V2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4,V5] CONFIG: EXYNOS5: Enable silent console |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V5] S5P: Serial: Add fdt support to driver |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4,V5] EXYNOS5: FDT: Add compatible strings for Serial |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/1] NET: Fix system hanging if NET device is not installed |
2013-05-17 |
Jim Lin |
jhersh |
New |
| [U-Boot,v3] Makefile: move the common makefile line to public area |
2013-05-17 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot,v2] spl: Make CONFIG_SPL_BUILD contain more functionality |
2013-05-17 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] board/b4860qds: Relax NOR flash teadc timing parameter |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] cfi_flash: use CFI driver without a monitor program |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,2/2] cfi_flash: return NULL for invalid base address input |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,1/2] cosmetic: cfi_flash: delete a space after an unary operator |
2013-05-17 |
Masahiro Yamada |
stroese |
New |
| [U-Boot,OMAP-ULPI] This patch fix the omap access to the tranceiver configuration registers using the ulpi bus. |
2013-05-17 |
Michael Trimarchi |
marex |
New |
| [U-Boot] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-17 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot,v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-17 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot,v5] Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL |
2013-05-17 |
ying.zhang@freescale.com |
trini |
Changes Requested |
| [U-Boot,v3,10/10] sandbox: image: Create a test for loading FIT images |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,09/10] bootstage: Remove unused entries related to kernel/ramdisk/fdt load |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,08/10] sandbox: image: Adjust FIT image printing to work with sandbox |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,07/10] image: Use fit_image_load() to load kernel |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,06/10] sandbox: Adjust bootm command to work with sandbox |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,05/10] image: Use fit_image_load() to load FDT |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,04/10] image: Use fit_image_load() to load ramdisk |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,03/10] image: Introduce fit_image_load() to load images from FITs |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,02/10] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,01/10] bootstage: Introduce sub-IDs for use with image loading |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v6] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
New |
| [U-Boot] README: Correct reference for CONFIG_SUPPORT_RAW_INITRD |
2013-05-16 |
Tom Rini |
trini |
New |
| [U-Boot,v5] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
Superseded |
| [U-Boot] ulpi patch in uboot |
2013-05-16 |
Michael Trimarchi |
trini |
Superseded |
| [U-Boot,v3,4/4] arm: factorize relocate_code routine |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,3/4] arm: do not compile relocate_code() for SPL builds |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,2/4] tx25: copy SPL directly, not using relocate_code. |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v3,1/4] mx31pdk: copy SPL directly, not using relocate_code. |
2013-05-16 |
Albert ARIBAUD |
aaribaud |
New |
| [U-Boot,v4] common/Makefile: Add new symbol CONFIG_SPL_ENV_xxx for environment in SPL |
2013-05-16 |
ying.zhang@freescale.com |
trini |
New |
| [U-Boot] OMAP5: uEVM: Fix pinmux for USB support |
2013-05-16 |
Lubomir Popov |
trini |
New |
