Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 ... 203 204 205 206 207 208 209 210 211 ... 305 306 Next »
Filters: Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,3/4] EXYNOS5: Enable GPIO Numbering. 0 0 0 2012-08-06 Rajeshwari Birje prom Changes Requested
[U-Boot,2/4] S5P: GPIO: Add GPIO pin numbering to driver 0 0 0 2012-08-06 Rajeshwari Birje prom Changes Requested
[U-Boot,1/4] EXYNOS5: Add GPIO unique pin numbering support 0 0 0 2012-08-06 Rajeshwari Birje prom Changes Requested
[U-Boot,7/7] EXYNOS5: Enable SPI booting. 0 0 0 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,6/7,V4] EXYNOS5: Enable SPI 0 0 0 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,5/7,V4] SPI: Add SPI Driver for EXYNOS. 1 0 1 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,4/7,V4] EXYNOS5: Add base address for SPI. 0 0 0 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,3/7,V4] EXYNOS: Add clock for SPI. 0 0 0 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,2/7,V4] SPI: Add W25Q32 to Winbond SPI flash table 0 0 0 2012-08-02 Rajeshwari Birje vapier Accepted
[U-Boot,1/7,V4] EXYNOS5: Add pinmux support for SPI 0 0 0 2012-08-02 Rajeshwari Birje prom Superseded
[U-Boot,7/7,V3] Enable SPI booting. 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,6/7,V3] EXYNOS5: Enable SPI 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,5/7,V3] SPI: Add SPI Driver for EXYNOS. 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,4/7,V3] EXYNOS5: Add base address for SPI. 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,3/7,V3] EXYNOS: Add clock for SPI. 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,2/7,V3] SPI: Add W25Q32 to Winbond SPI flash table 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,1/7,V3] EXYNOS5: Add pinmux support for SPI 0 0 0 2012-08-01 Rajeshwari Birje Superseded
[U-Boot,8/8,V2] EXYNOS5: Enable SPI booting. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,7/8,V2] EXYNOS5: Enable SPI 1 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,6/8,V2] SPI: Add SPI Driver for EXYNOS. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,5/8] SPI: Add SPI slave mode flag 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,4/8,V2] EXYNOS5: Add base address for SPI. 1 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,3/8,V2] EXYNOS: Add clock for SPI. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,2/8,V2] SPI: Add W25Q32 to Winbond SPI flash table 1 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,1/8,V2] EXYNOS5: Add pinmux support for SPI 1 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,8/8] EXYNOS5: Enable SPI booting. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,7/8] EXYNOS5: Enable SPI 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,6/8] SPI: Add SPI Driver for EXYNOS. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,5/8] SPI: Add SPI slave mode flag 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,4/8] EXYNOS5: Add base address for SPI. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,3/8] EXYNOS: Add clock for SPI. 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,2/8] SPI: Add W25Q32 to Winbond SPI flash table 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,1/8] EXYNOS5: Add pinmux support for SPI 0 0 0 2012-07-31 Rajeshwari Birje Superseded
[U-Boot,8/8,V7] CONFIG: SMDK5250: I2C: Enable I2C 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,7/8,V7] I2C: Add support for Multi channel 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,6/8,V7] I2C: Modify the I2C driver for EXYNOS5 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,5/8,V7] I2C: Move struct s3c24x0_i2c to a common place. 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,4/8,V7] EXYNOS: PINMUX: Add pinmux support for I2C 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,3/8,V7] EXYNOS5: define EXYNOS5_I2C_SPACING 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,2/8,V7] EXYNOS: Add I2C base address. 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,1/8,V7] EXYNOS: CLK: Add i2c clock 1 0 0 2012-07-24 Rajeshwari Birje hs Accepted
[U-Boot,8/8,V6] CONFIG: SMDK5250: I2C: Enable I2C 2 0 0 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,7/8,V6] I2C: Add support for Multi channel 1 0 0 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,6/8,V6] I2C: Modify the I2C driver for EXYNOS5 2 0 0 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,5/8,V6] I2C: Move struct s3c24x0_i2c to a common place. 1 0 0 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,4/8,V6] EXYNOS: PINMUX: Add pinmux support for I2C 1 0 0 2012-07-19 Rajeshwari Birje hs Superseded
[U-Boot,3/8,V6] EXYNOS5: define EXYNOS5_I2C_SPACING 1 0 0 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot,2/8,V6] EXYNOS: Add I2C base address. 1 0 0 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot,1/8,V6] EXYNOS: CLK: Add i2c clock 2 0 0 2012-07-19 Rajeshwari Birje hs Accepted
[U-Boot] EXYNOS: Fix USB compiler warning 1 0 0 2012-07-10 Rajeshwari Birje Accepted
[U-Boot,7/7,V5] CONFIG: SMDK5250: I2C: Enable I2C 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,6/7,V5] I2C: Add support for Multi channel 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,5/7,V5] I2C: Modify the I2C driver for EXYNOS5 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,4/7,V5] I2C: Move struct s3c24x0_i2c to a common place. 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,3/7,V5] EXYNOS: PINMUX: Add pinmux support for I2C 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,2/7,V5] EXYNOS: Add I2C base address. 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,1/7,V5] EXYNOS: CLK: Add i2c clock 1 0 0 2012-07-05 Rajeshwari Birje hs Superseded
[U-Boot,10/10,V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,09/10,V6] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,08/10,V6] EXYNOS5: CLOCK: Add BPLL support 1 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,07/10,V6] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,06/10,V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,05/10,V6] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,04/10,V6] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,03/10,V6] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,02/10,V6] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,01/10,V6] ARCH: SPL: Add parametric board initializer 0 0 0 2012-07-04 Rajeshwari Birje prom Accepted
[U-Boot,10/10,V5] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,09/10,V5] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,08/10,V5] EXYNOS5: CLOCK: Add BPLL support 1 0 0 2012-07-02 Rajeshwari Birje prom Accepted
[U-Boot,07/10,V5] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,06/10,V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,05/10,V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V5] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,03/10,V5] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V5] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V5] ARCH: SPL: Add parametric board initializer 0 0 0 2012-07-02 Rajeshwari Birje prom Changes Requested
[U-Boot,10/10,V4] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,09/10,V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 1 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,08/10,V4] EXYNOS5: CLOCK: Add BPLL support 1 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,07/10,V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 1 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,06/10,V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 1 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,03/10,V4] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V4] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V4] ARCH: SPL: Add parametric board initializer 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,10/10,V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,09/10,V3] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,08/10,V3] EXYNOS5: CLOCK: Add BPLL support 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,07/10,V3] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,06/10,V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,05/10,V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,04/10,V3] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 0 0 0 2012-06-29 Rajeshwari Birje prom Accepted
[U-Boot,03/10,V3] SMDK5250: Add smdk5250-uboot-spl.lds 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,02/10,V3] SMDK5250: SPL: Define parametric board initializer 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,01/10,V3] ARCH: SPL: Add parametric board initializer 0 0 0 2012-06-29 Rajeshwari Birje prom Changes Requested
[U-Boot,9/9,V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested
[U-Boot,7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 0 0 0 2012-06-20 Rajeshwari Birje Changes Requested