Patches

Show patches with: Archived = No   
« 1 2 ... 202 203 204599 600 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,2/2] power: pmic: act8846: add missing newline to debug statements 1 - - 0 0 0 2016-08-07 John Keeping sjg Accepted
[U-Boot,1/2] power: regulator: act8846: fix reading values 1 - - 0 0 0 2016-08-07 John Keeping sjg Accepted
[U-Boot,v2] rockchip: rk3288: Fix pinctrl for GPIO bank 0 - 1 - 0 0 0 2016-07-25 John Keeping sjg Accepted
[U-Boot] rockchip: rk3288: Fix pinctrl for GPIO bank 0 - - - 0 0 0 2016-07-21 John Keeping sjg Superseded
[U-Boot,v2] rockchip: sdram: Fix register layout for Linux 1 1 - 0 0 0 2016-07-15 John Keeping sjg Accepted
[U-Boot] Revert "Revert "rockchip: rk3288: correct sdram setting"" - - - 0 0 0 2016-07-15 John Keeping sjg Superseded
[U-Boot] microblaze: ll_temac driver: mask of length for newer h/w versions - - - 0 0 0 2010-12-21 John Linn Changes Requested
[U-Boot,1/4] Serial: pl011: new vendor init options - - - 0 0 0 2011-05-12 John Rigby Accepted
[U-Boot,PATCHv4,4/4] armv7: Add support for ST-Ericsson U8500 href platform - - - 0 0 0 2011-04-19 John Rigby aaribaud Accepted
[U-Boot,PATCHv4,3/4] I2C: Add driver for ST-Ericsson U8500 i2c - - - 0 0 0 2011-04-19 John Rigby aaribaud Accepted
[U-Boot,PATCHv4,2/4] armv7: Add ST-Ericsson u8500 arch - - - 0 0 0 2011-04-19 John Rigby aaribaud Accepted
[U-Boot,PATCHv4,1/4] Serial: p1011: new vendor init options - - - 0 0 0 2011-04-19 John Rigby Accepted
[U-Boot,PATCHv3,2/2] MMC: omap_hsmmc.c: disable multiblock rw on old rev omap34xx silicon - - - 0 0 0 2011-04-19 John Rigby afleming Accepted
[U-Boot,PATCHv2,1/2] MMC: make b_max unconditional - - - 0 0 0 2011-04-18 John Rigby afleming Accepted
[U-Boot,PATCHv2] MMC: disable multiblock rw on old rev OMAP3 silicon - - - 0 0 0 2011-04-14 John Rigby Changes Requested
[U-Boot,PATCHv3,4/4] armv7: Add support for ST-Ericsson U8500 href platform - - - 0 0 0 2011-04-12 John Rigby Superseded
[U-Boot,PATCHv3,3/4] I2C: Add driver for ST-Ericsson U8500 i2c 1 - - 0 0 0 2011-04-12 John Rigby Accepted
[U-Boot,PATCHv3,2/4] armv7: Add ST-Ericsson u8500 arch - - - 0 0 0 2011-04-12 John Rigby Superseded
[U-Boot,PATCHv3,1/4] Serial: p1011: new vendor init options - - - 0 0 0 2011-04-12 John Rigby Accepted
[U-Boot,PATCHv2,4/4] armv7: Add support for ST-Ericsson U8500 href platform - - - 0 0 0 2011-04-02 John Rigby Changes Requested
[U-Boot,PATCHv2,3/4] I2C: add driver of st-ericsson u8500 i2c - - - 0 0 0 2011-04-02 John Rigby Changes Requested
[U-Boot,PATCHv2,2/4] armv7: Add ST-Ericsson u8500 arch - - - 0 0 0 2011-04-02 John Rigby Changes Requested
[U-Boot,PATCHv2,1/4] p101x: extra init for u8500 - - - 0 0 0 2011-04-02 John Rigby Changes Requested
[U-Boot,4/4] armv7: Add support for ST-Ericsson U8500 href platform - - - 0 0 0 2011-03-22 John Rigby Changes Requested
[U-Boot,3/4] I2C: add driver of st-ericsson u8500 i2c - - - 0 0 0 2011-03-22 John Rigby Changes Requested
[U-Boot,2/4] armv7: Add ST-Ericsson u8500 arch - - - 0 0 0 2011-03-22 John Rigby Changes Requested
[U-Boot,1/4] p101x: extra init for u8500 - - - 0 0 0 2011-03-22 John Rigby Changes Requested
[U-Boot,RFC,8/8] OMAP3: Add ift target to top level Makefile - - - 0 0 0 2010-12-28 John Rigby trini RFC
[U-Boot,RFC,7/8] mkimage: Add OMAP boot image support - - - 0 0 0 2010-12-28 John Rigby spaulraj Superseded
[U-Boot,RFC,6/8] omap3_beagle: add nand_spl support - - - 0 0 0 2010-12-28 John Rigby spaulraj Changes Requested
[U-Boot,RFC,5/8] NAND: omap_gpmc.c: add nand_spl support - - - 0 0 0 2010-12-28 John Rigby spaulraj Changes Requested
[U-Boot,RFC,4/8] OMAP3: add dram timing constants from x-loader - - - 0 0 0 2010-12-28 John Rigby trini RFC
[U-Boot,RFC,3/8] OMAP3: and nand_spl support - - - 0 0 0 2010-12-28 John Rigby spaulraj Changes Requested
[U-Boot,RFC,2/8] armv7: add nand_spl support - - - 0 0 0 2010-12-28 John Rigby spaulraj Changes Requested
[U-Boot,RFC,1/8] NAND: nand_spl/nand_boot.c: add 16-bit and readid support - - - 0 0 0 2010-12-28 John Rigby Changes Requested
[U-Boot] OMAP[34]: fix broken timer - - 1 0 0 0 2010-12-28 John Rigby aaribaud Accepted
[U-Boot,v2] OMAP[34]: remove board config.mk files 1 - - 0 0 0 2010-12-23 John Rigby trini Not Applicable
[U-Boot] OMAP[34]: remove board config.mk files - - - 0 0 0 2010-12-23 John Rigby spaulraj Superseded
[U-Boot] Move DECLARE_GLOBAL_DATA_PTR to file scope - - - 0 0 0 2010-12-21 John Rigby Accepted
[U-Boot,RFC,v2] ARM: Avoid compiler optimization for usages of readb, writeb and friends. - - - 0 0 0 2010-12-21 John Rigby Not Applicable
[U-Boot,RFC,v2] ARM: Avoid compiler optimization for usages of readb, writeb and friends. - - - 0 0 0 2010-12-20 John Rigby Not Applicable
[U-Boot] Can I read env from RAM in uboot script? - - - 0 0 0 2013-01-29 John Stile trini Not Applicable
[U-Boot] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage - - - 0 0 0 2016-08-22 John Tobias lmajewski New
[U-Boot] usb: ums - expose selected partition/s v2 - - - 0 0 0 2016-04-11 John Tobias trini Superseded
[U-Boot] usb: ums - expose selected partition/s - - - 0 0 0 2016-04-08 John Tobias trini Superseded
[U-Boot,v7,5/5] imx6: SPL support for iMX6 SabreSD 1 - - 0 0 0 2014-11-12 John Tobias sbabic Awaiting Upstream
[U-Boot,v7,4/5] imx6: add spl in the header file - - - 0 0 0 2014-11-12 John Tobias sbabic Awaiting Upstream
[U-Boot,v7,3/5] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-12 John Tobias sbabic Awaiting Upstream
[U-Boot,v7,2/5] imx6: add data configuration file for SPL - - - 0 0 0 2014-11-12 John Tobias sbabic Awaiting Upstream
[U-Boot,v7,1/5] imx6: add spl config for mx6sabresd - - - 0 0 0 2014-11-12 John Tobias sbabic Awaiting Upstream
[U-Boot,v6,5/5] imx6: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-12 John Tobias sbabic Changes Requested
[U-Boot,v6,4/5] imx6: add spl in the header file - - - 0 0 0 2014-11-12 John Tobias sbabic Changes Requested
[U-Boot,v6,3/5] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-12 John Tobias sbabic Changes Requested
[U-Boot,v6,2/5] imx6: add data configuration file for SPL - - - 0 0 0 2014-11-12 John Tobias sbabic Changes Requested
[U-Boot,v6,1/5] imx6: add spl config for mx6sabresd - - - 0 0 0 2014-11-12 John Tobias sbabic Changes Requested
[U-Boot,v5,5/5] imx6: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-12 John Tobias Changes Requested
[U-Boot,v5,4/5] mmc: imx6: call spl_board_mmc_init - - - 0 0 0 2014-11-12 John Tobias Changes Requested
[U-Boot,v5,3/5] imx6: add spl config for mx6sabresd - - - 0 0 0 2014-11-12 John Tobias Changes Requested
[U-Boot,v5,2/5] imx6: add spl in the header file - - - 0 0 0 2014-11-12 John Tobias Changes Requested
[U-Boot,v5,1/5] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-12 John Tobias Changes Requested
[U-Boot,v4,7/7] imx6: add data configuration file for SPL - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,6/7] imx6: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,5/7] imx6: add some flexibility for defining macros - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,4/7] imx6: add spl in the header file - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,3/7] mmc: imx6: call spl_board_mmc_init - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,2/7] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,v4,1/7] imx6: add spl config for mx6sabresd - - - 0 0 0 2014-11-11 John Tobias Changes Requested
[U-Boot,7/7] kconfig: imx6sl: add add SUPPORT_SPL - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,6/7] imx6sl: add SPL support for iMX6SL-evk - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,5/7] imx6sl: add spl in include header file - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,4/7] imx6: add additional flexibility for defining macros - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,3/7] imx6sl: add spl on board configuration - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,2/7] imx6sl: update DCD configuration file - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,1/7] imx6: add macro define inclusion - - - 0 0 0 2014-11-09 John Tobias sbabic Changes Requested
[U-Boot,v3,8/8] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,7/8] imx6: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,6/8] imx6: add data configuration file for SPL - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,5/8] imx6: add spl on board configuration - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,4/8] imx6: add some flexibility for defining macros - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,3/8] imx6: add spl on include header file - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,2/8] mmc: imx6: call spl_board_mmc_init - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v3,1/8] mmc: add spl_board_mmc_init - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,8/8] kconfig: imx6: add SUPPORT_SPL - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,7/8] imx6: add data configuration file for SPL - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,6/8] imx6: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,5/8] imx6: add spl on board configuration - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,4/8] imx6: add some flexibility for defining macros - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,3/8] imx6: add spl on board configuration - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,2/8] mmc: imx6: call spl_board_mmc_init - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,v2,1/8] mmc: add spl_board_mmc_init - - - 0 0 0 2014-11-08 John Tobias sbabic Changes Requested
[U-Boot,8/8] imx: SPL support for iMX6 SabreSD - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,7/8] imx: add configuration file for SPL - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,6/8] mx6: add SPL support in the header - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,5/8] mmc: imx: add spl_board_mmc_init - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,4/8] imx6: add flexibility for defining stack address - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,3/8] imx6: add spl on board configuration - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,2/8] imx: add file in makefile - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot,1/8] kconfig: add SUPPORT_SPL - - - 0 0 0 2014-11-07 John Tobias sbabic Changes Requested
[U-Boot] Consistently repeated TFTP timeouts (target directly connected to host PC) - - - 0 0 0 2014-06-19 Johnson Thomas trini RFC
[U-Boot] FDT: Fix DTC repository references 1 - - 0 0 0 2014-05-27 Jon Loeliger trini Accepted
« 1 2 ... 202 203 204599 600 »