| [U-Boot,16/24] mxc_i2c: prep work for multiple busses support |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,15/24] mxc_i2c: add i2c_regs argument to i2c_imx_stop |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,02/24] mxc_i2c: remove ifdef of CONFIG_HARD_I2C |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,13/25] mxc_i2c: change slave addr if conflicts with destination. |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,1/1] net: phy: micrel: make ksz9021 phy accessible |
2012-06-28 |
Troy Kisky |
jhersh |
Awaiting Upstream |
| [U-Boot,V2,06/21] imximage: add plugin commands |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,21/25] i.mx: iomux-v3.h: move to imx-common include directory |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,23/25] i.mx53: add definition for I2C3_BASE_ADDR |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,04/21] imximage: cleanup parsing |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,13/24] mxc_i2c: check for arbitration lost |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,01/24] mxc_i2c: fix i2c_imx_stop |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,08/24] mxc_i2c: remove redundant read |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,22/24] i.mx53: add definition for I2C3_BASE_ADDR |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,23/24] imx-common: add i2c.c for bus recovery support |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,02/25] mxc_i2c: remove ifdef of CONFIG_HARD_I2C |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,07/24] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,03/24] mxc_i2c: create tx_byte function |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V3,01/25] mxc_i2c: fix i2c_imx_stop |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,24/24] mx6qsabrelite: add i2c multi-bus support |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V3,12/25] mxc_i2c: don't disable controller after every transaction |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,24/25] imx-common: add i2c.c for bus recovery support |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,21/25] i.mx: iomux-v3.h: move to imx-common include directory |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,24/25] imx-common: add i2c.c for bus recovery support |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,05/25] mxc_i2c: create i2c_init_transfer |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,04/11] imximage: cleanup parsing |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,10/11] mx6qsabrelite: imximage.cfg: allow plugin to work |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,3/3] mx53evk: select CONFIG_CMD_RSMODE |
2012-05-26 |
Troy Kisky |
sbabic |
Superseded |
| [U-Boot,1/1] DaVinci: fix ddr2 vtp i/o calibration |
2012-05-18 |
Troy Kisky |
trini |
Accepted |
| [U-Boot,V3,25/25] mx6qsabrelite: add i2c multi-bus support |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,10/25] mxc_i2c: place imx_start code inline |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V3,07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,11/25] mxc_i2c: place i2c_reset code inline |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,23/25] i.mx53: add definition for I2C3_BASE_ADDR |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,18/25] mxc_i2c: add bus recovery support |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,1/1] imximage.cfg: run files through C preprocessor |
2013-01-18 |
Troy Kisky |
sbabic |
Superseded |
| [U-Boot,20/24] i.mx: iomux-v3.h: move to imx-common include directory |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,02/11] imximage: check dcd_len as entries added |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V3,17/25] mxc_i2c: prep work for multiple busses support |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,17/24] mxc_i2c: add bus recovery support |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,12/24] mxc_i2c: change slave addr if conflicts with destination. |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,10/24] mxc_i2c: place i2c_reset code inline |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,RFC,v2,3/3] mx53evk: add resetmode support |
2012-06-13 |
Troy Kisky |
|
RFC |
| [U-Boot,7/9] mxc_i2c: Allow MX6Q I2C3 to work |
2012-05-31 |
Troy Kisky |
|
Rejected |
| [U-Boot,V2,03/25] mxc_i2c: create tx_byte function |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,19/24] iomux-v3: remove include of mx6x_pins.h |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,1/1] net: phy: micrel: make ksz9021 phy accessible |
2012-06-21 |
Troy Kisky |
|
Accepted |
| [U-Boot,18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,11/24] mxc_i2c: don't disable controller after every transaction |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V2,08/21] mx6: add plugin file for use with imximage.cfg |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,RFC,v2,2/3] mx6qsabrelite: add resetmode support |
2012-06-13 |
Troy Kisky |
|
RFC |
| [U-Boot,V2,14/21] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,11/21] mx6q_4x_mt41j128.cfg: enable plugin mode |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V3,1/3] imx-common/cmd_resetmode.c: add imx resetmode command |
2012-08-09 |
Troy Kisky |
sbabic |
Superseded |
| [U-Boot,V2,01/21] imximage: make header variable length |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,12/21] mx6q_4x_mt41j128.cfg: add comments |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,20/21] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,13/21] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,18/21] arch-mx6: add mx6dl_pins.h |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V3,22/25] i.mx: iomux-v3.c: move to imx-common directory |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,10/25] mxc_i2c: place imx_start code inline |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,15/25] mxc_i2c: add retries |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,v2,1/2] RFC: create u-boot-common.lds |
2012-02-08 |
Troy Kisky |
|
RFC |
| [U-Boot,V2,01/25] mxc_i2c: fix i2c_imx_stop |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V3,06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,3/3] mx53evk: add resetmode support |
2012-08-09 |
Troy Kisky |
sbabic |
Superseded |
| [U-Boot,V3,08/32] imximage: make header variable length |
2012-10-22 |
Troy Kisky |
sbabic |
Not Applicable |
| [U-Boot,06/24] mxc_i2c.c: code i2c_probe as a 0 length i2c_write |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,V3,14/25] mxc_i2c: check for arbitration lost |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,03/11] imximage: enable word writes for version2 header |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V3,13/25] mxc_i2c: change slave addr if conflicts with destination. |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,07/21] imximage.cfg: run files through C preprocessor |
2012-09-22 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,v3,4/5] net: phy: make board_phy_config responsible for calling drv->config |
2012-02-02 |
Troy Kisky |
|
Accepted |
| [U-Boot,V2,16/25] mxc_i2c: add i2c_regs argument to i2c_imx_stop |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,08/11] mx6: add plugin file for use with imximage.cfg |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,V2,14/25] mxc_i2c: check for arbitration lost |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,01/11] imximage: make header variable length |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,v4,1/5] net: fec_mxc: add 1000 Mbps selection |
2012-02-03 |
Troy Kisky |
sbabic |
Accepted |
| [U-Boot,V2,12/25] mxc_i2c: don't disable controller after every transaction |
2012-07-05 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V3,20/25] iomux-v3: remove include of mx6x_pins.h |
2012-07-19 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,V2,11/25] mxc_i2c: place i2c_reset code inline |
2012-07-05 |
Troy Kisky |
hs |
Superseded |
| [U-Boot,09/24] mxc_i2c: place imx_start code inline |
2012-06-22 |
Troy Kisky |
hs |
Accepted |
| [U-Boot,21/24] i.mx: iomux-v3.c: move to imx-common directory |
2012-06-22 |
Troy Kisky |
hs |
Superseded |
| [U-Boot] sntp: fix problems at setting RTC at multi-bus I2C systems |
2011-05-02 |
Trübenbach, Ralf |
|
Rejected |
| [U-Boot] powerpc/corenet_ds: Change CONFIG_SYS_DCSRBAR_PHYS |
2011-05-02 |
Trübenbach, Ralf |
galak |
Not Applicable |
| [U-Boot] ehci-pci: Add PCI EHCI controller |
2011-03-31 |
Trübenbach, Ralf |
|
Accepted |
| [U-Boot] QorIQ corenet_ds.h: Wrong PCIe 3 virtual address |
2011-04-20 |
Trübenbach, Ralf |
galak |
Accepted |
| [U-Boot] ColdFire: Fix missing _IO_BASE which caused compile error |
2009-07-28 |
TsiChung Liew |
|
Accepted |
| [U-Boot] mmc: Add a quirk to add delay during completion of sdhci_send_cmd |
2012-09-04 |
Tushar Behera |
afleming |
Superseded |
| [U-Boot] Origen: Add default clock settings for multimedia IPs |
2012-08-31 |
Tushar Behera |
aaribaud |
Accepted |
| [U-Boot] spl: remove forced linking of commands into SPL |
2012-08-09 |
Tyler Olmstead |
trini |
Accepted |
| [U-Boot] U-Boot: AM335x Booting with environment in NAND: ECC cause failures... |
2012-11-02 |
Ulf Samuelsson |
trini |
Not Applicable |
| [U-Boot,18/18] Make the at91sam9263ek compile again. |
2011-02-21 |
Uli Raich |
reinhardm |
Rejected |
| [U-Boot] updated at91sam9263 port |
2011-02-25 |
Uli Raich |
reinhardm |
Superseded |