| [U-Boot,v2,3/3] Add TI816X evm board support |
2013-03-29 |
TENART Antoine |
trini |
Superseded |
| [U-Boot,1/8] Prepare for TI816X : reuse existing code from TI814X |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,v3,3/3] Add TI816X evm board support |
2013-04-12 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,3/8] Add TI816X clocks definitions |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,5/8] Add TI816X cpu definitions |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,7/8] Add TI816X mmc clock reference |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,8/8] Add TI816X evm board support |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,4/8] Add TI816X ddr definitions |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot,2/8] Add TI816X mux definitions. |
2013-03-28 |
TENART Antoine |
trini |
Changes Requested |
| [U-Boot] OpenRD: Reset PCIe endpoint while boot-up through PERST# |
2010-05-04 |
Tanmay Upadhyay |
prafulla@marvell.com |
Not Applicable |
| [U-Boot] OpenRD: Bring PCIe endpoint out of reset |
2010-04-15 |
Tanmay Upadhyay |
|
Superseded |
| [U-Boot] OpenRD: Bring PCIe endpoint out of reset |
2010-04-20 |
Tanmay Upadhyay |
prafulla@marvell.com |
Superseded |
| [U-Boot,4/4] arm, omap3: Add support for TechNexion modules |
2011-11-21 |
Tapani Utriainen |
trini |
Superseded |
| [U-Boot,3/4] arm, omap3: Add support for TechNexion modules |
2011-11-21 |
Tapani Utriainen |
trini |
Superseded |
| [U-Boot,1/4] arm, omap3: Add support for TechNexion modules |
2011-11-21 |
Tapani Utriainen |
trini |
Superseded |
| [U-Boot,2/4] arm, omap3: Add support for TechNexion modules |
2011-11-21 |
Tapani Utriainen |
trini |
Superseded |
| [U-Boot,1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state |
2012-06-21 |
Tero Kristo |
trini |
Not Applicable |
| [U-Boot,1/3] omap4: panda: disable uart2 pads during boot |
2012-04-25 |
Tero Kristo |
trini |
Accepted |
| [U-Boot,3/3] omap4: do not enable auxiliary cores |
2012-04-25 |
Tero Kristo |
trini |
Accepted |
| [U-Boot,2/3] omap4: do not enable fs-usb module |
2012-04-25 |
Tero Kristo |
trini |
Accepted |
| [U-Boot] Improve read performance of generic mmc. |
2009-11-19 |
Terry Lv |
afleming |
Superseded |
| [U-Boot,3/3] mxc_spi: apply new mxc_spi version configs to other soc configs |
2012-08-15 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot,4/4] Environment in MMC |
2010-05-13 |
Terry Lv |
|
Superseded |
| [U-Boot,2/4] mx53_smd: add spi nor support |
2012-08-14 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot,v5] Save environment data to mmc. |
2010-05-07 |
Terry Lv |
|
Accepted |
| [U-Boot,2/3] mxc_spi: change to use version config instead of soc config in mxc_spi |
2012-08-15 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot] MMC may wrongly regconize 2GB eMMC as high capacity |
2011-03-21 |
Terry Lv |
|
Superseded |
| [U-Boot,1/3] mx53_smd: add spi nor support |
2012-08-15 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot,3/4] mxc_spi: change to use version config instead of soc config in mxc_spi |
2012-08-14 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot,4/4] mxc_spi: apply new mxc_spi version configs to other soc configs |
2012-08-14 |
Terry Lv |
sbabic |
Changes Requested |
| [U-Boot,1/4] spi_nor: add m25p32 spi nor driver |
2012-08-14 |
Terry Lv |
sbabic |
Rejected |
| [U-Boot,2/3] i2c: sh_i2c.c: correct BUSY bit define in ICSR |
2012-09-11 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v2,7/9] i2c: sh_i2c.c: remove unused function |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot,v4,6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4 |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v2,4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot,v3,05/10] i2c: sh_i2c: enable i2c_probe |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v2,5/9] i2c: sh_i2c: enable i2c_probe |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot,RFC] net: nfs: make NFS_TIMEOUT configurable |
2012-07-03 |
Tetsuyuki Kobayashi |
jhersh |
Superseded |
| [U-Boot,v2,9/9] arm: rmobile: kzm9g: enable I2C2 |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot,v4] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-07-06 |
Tetsuyuki Kobayashi |
aaribaud |
Superseded |
| [U-Boot,2/2] DEBUG: make u-boot_r which is linked for fixed relocation address |
2012-11-21 |
Tetsuyuki Kobayashi |
aaribaud |
Rejected |
| [U-Boot] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000 |
2012-06-25 |
Tetsuyuki Kobayashi |
jhersh |
Accepted |
| [U-Boot] arm: rmobile: bugfix: wrong register saving in lowlevel_init |
2012-10-05 |
Tetsuyuki Kobayashi |
trini |
Accepted |
| [U-Boot] arm: bugfix: Move vector table before jumping relocated code |
2012-06-25 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v4,2/7] arm: rmobile: kzm9g: Adjust low level hardware setting |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,2/3] arm: rmobile: kzm9g: Adjust low level hardware setting |
2012-07-05 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v4,3/7] arm: rmobile: kzm9g: change prompt to board specific |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,3/6] arm: rmobile: kzm9g: change prompt to board specific |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,1/2] arm: rmobile: kzm9g: Adjust SDRAM setting |
2012-11-21 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,4/6] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot] BUGFIX: arm: armv7: data abort in get_bad_stack_swi |
2013-04-04 |
Tetsuyuki Kobayashi |
aaribaud |
Changes Requested |
| [U-Boot,2/4] arm: rmobile: kzm9g: remove unrelated config |
2012-07-26 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,01/10] i2c: sh_i2c.c: support iccl and icch extension |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot] arm: rmobile: kzm9g: Modify sdram area |
2012-06-25 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,1/2] DEBUG: fix relocation address |
2012-11-21 |
Tetsuyuki Kobayashi |
aaribaud |
Rejected |
| [U-Boot,v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-06-28 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3] BUGFIX: arm: data abort in get_bad_stack_swi |
2013-04-05 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,10/10] i2c: sh_i2c: use setbits/clrbits macro |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,2/2] arm: rmobile: kzm9g: Adjust ETM trace clock |
2012-11-21 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v2,4/5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt |
2012-07-07 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v2] BUGFIX: arm: data abort in get_bad_stack_swi |
2013-04-05 |
Tetsuyuki Kobayashi |
aaribaud |
Changes Requested |
| [U-Boot,v3,03/10] i2c: sh_i2c.c: adjust for SH73A0 |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v4,4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt |
2012-07-17 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3,06/10] i2c: sh_i2c.c: check error in i2c_read and i2c_write |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v2,3/5] arm: rmobile: kzm9g: change prompt to board specific |
2012-07-07 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-06-25 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v4,1/7] arm: rmobile: kzm9g: Modify sdram area |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,RFC,v2] net: nfs: make NFS_TIMEOUT configurable |
2012-07-04 |
Tetsuyuki Kobayashi |
jhersh |
Superseded |
| [U-Boot,v4,7/7] arm: rmobile: kzm9g: enable reset command |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v4,5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g |
2012-07-17 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot] arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting |
2012-07-20 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,07/10] i2c: sh_i2c.c: remove unused function |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,1/3] arm: rmobile: kzm9g: Modify sdram area |
2012-07-05 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v2,1/5] arm: rmobile: kzm9g: Modify sdram area |
2012-07-07 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,1/4] arm: rmobile: kzm9g: add NFS_TIMEOUT in config file |
2012-07-26 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,3/4] arm: rmobile: kzm9g: fix CPU info |
2012-07-26 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,4/4] arm: rmobile: kzm9g: separate cpu_rev to integer and fraction |
2012-07-26 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,RFC,v3] net: nfs: make NFS_TIMEOUT configurable |
2012-07-04 |
Tetsuyuki Kobayashi |
jhersh |
Accepted |
| [U-Boot,v2,1/9] i2c: sh_i2c.c: support iccl and icch extension |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot,v3,2/6] arm: rmobile: kzm9g: Adjust low level hardware setting |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3,04/10] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-06-28 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3,1/6] arm: rmobile: kzm9g: Modify sdram area |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,3/3] arm: rmobile: kzm9g: change prompt to board specific |
2012-07-05 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,RFC] net: nfs: extend NFS_TIMEOUT |
2012-06-25 |
Tetsuyuki Kobayashi |
jhersh |
Superseded |
| [U-Boot,v2,2/9] i2c: sh_i2c.c: correct BUSY bit define in ICSR |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |
| [U-Boot] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S |
2012-06-26 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-06-29 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,08/10] arm: rmobile: kzm9g: enable I2C1 |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v2,2/5] arm: rmobile: kzm9g: Adjust low level hardware setting |
2012-07-07 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,1/3] i2c: sh_i2c.c: support iccl and icch extension |
2012-09-11 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v5] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 |
2012-07-07 |
Tetsuyuki Kobayashi |
trini |
Accepted |
| [U-Boot,v5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt |
2012-07-20 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v2,5/5] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g |
2012-07-07 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v3,6/6] arm: rmobile: kzm9g: Modify bus controller setting for CS4 |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,3/3] i2c: sh_i2c.c: adjust for SH73A0 |
2012-09-11 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot] arm: armv7: add compile option -mno-unaligned-access if available |
2012-07-02 |
Tetsuyuki Kobayashi |
aaribaud |
Accepted |
| [U-Boot,v3,02/10] i2c: sh_i2c.c: correct BUSY bit define in ICSR |
2012-09-14 |
Tetsuyuki Kobayashi |
hs |
Accepted |
| [U-Boot,v3,5/6] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g |
2012-07-09 |
Tetsuyuki Kobayashi |
|
Superseded |
| [U-Boot,v2,8/9] arm: rmobile: kzm9g: enable I2C1 |
2012-09-12 |
Tetsuyuki Kobayashi |
hs |
Superseded |