Show patches with: Archived = No       |   81313 patches
« 1 2 3 4813 814 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v4,3/3] dm: led: add testcase for "default-state" property This series adds support for gpio-leds "default-state" property. The - - - - 0 0 0 2018-04-11 linux-kernel-dev@beckhoff.com trini New
[U-Boot,v4,2/3] dm: led: auto probe() LEDs with "default-state" This series adds support for gpio-leds "default-state" property. The - - - - 0 0 0 2018-04-11 linux-kernel-dev@beckhoff.com trini New
[U-Boot,v4,1/3] dm: led: Support "default-state" property This series adds support for gpio-leds "default-state" property. The - - - - 0 0 0 2018-04-11 linux-kernel-dev@beckhoff.com trini New
[U-Boot,v3,3/3] dm: led: add testcase for "default-state" property This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-04 linux-kernel-dev@beckhoff.com trini Accepted
[U-Boot,v3,2/3] dm: led: auto probe() LEDs with "default-state" This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-04 linux-kernel-dev@beckhoff.com trini Accepted
[U-Boot,v3,1/3] dm: led: Support "default-state" property This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-04 linux-kernel-dev@beckhoff.com trini Accepted
[U-Boot,v2,3/3] dm: led: add testcase for "default-state" property This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-03 linux-kernel-dev@beckhoff.com trini Superseded
[U-Boot,v2,2/3] dm: led: auto probe() LEDs with "default-state" This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-03 linux-kernel-dev@beckhoff.com trini Superseded
[U-Boot,v2,1/3] dm: led: Support "default-state" property This series adds support for gpio-leds "default-state" property. The - - 1 - 0 0 0 2018-04-03 linux-kernel-dev@beckhoff.com trini Superseded
[U-Boot,5/5] arm64: a37xx: defconfigs: enable PCI_CMD and E1000 driver *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,4/5] arm64: a37xx: dts: enable pcie port *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,3/5] arm64: a37xx: defconfigs: enable aardvark pcie driver *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,2/5] arm64: a37xx: pci: add support for aardvark pcie driver *** SUBJECT HERE *** - - 2 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,1/5] arm64: a37xx: populate pcie memory region *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,13/13] arm64: a37xx: remove old pinctrl implementation *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,12/13] Revert "arm64: a37xx: dts: Add pin control nodes to DT" *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,11/13] doc: a37xx: Introduce pinctrl device tree binding *** SUBJECT HERE *** - - 2 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,10/13] arm64: a37xx: dts: Correct mpp definitions *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,09/13] arm64: a37xx: pinctrl: Correct mpp definitions *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,08/13] arm64: a37xx: pinctrl: Fix gpio pin offset in register *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,07/13] arm64: a37xx: pinctrl: Fix the pin 23 on south bridge *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,06/13] arm64: a37xx: dts: Fix the number of GPIO on south bridge *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,05/13] arm64: a37xx: pinctrl: Fix number of pin in south bridge *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,04/13] arm64: a37xx: dts: Add additional pinctrl definition *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,03/13] arm64: a37xx: dts: Add pinctrl configuration for ESPRESSOBin board *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,02/13] arm64: a37xx: defconfig: Enable PINCTRL and GPIO support for ESPRESSOBin board *** SUBJECT HERE *** - - 1 1 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,01/13] arm64: a37xx: dts: add gpio head file including *** SUBJECT HERE *** - - - - 0 0 0 2018-03-26 make@marvell.com stroese Accepted
[U-Boot,2/2] dm: led: auto probe() LEDs with "default-state" This series adds support for gpio-leds "default-state" property. The - - - - 0 0 0 2018-03-07 linux-kernel-dev@beckhoff.com sjg Changes Requested
[U-Boot,1/2] dm: led: Support "default-state" property This series adds support for gpio-leds "default-state" property. The - - - - 0 0 0 2018-03-07 linux-kernel-dev@beckhoff.com sjg Changes Requested
[U-Boot] dm: mmc: socfpga: call dwmci_probe() [U-Boot] dm: mmc: socfpga: call dwmci_probe() - - 1 - 0 0 0 2018-03-06 linux-kernel-dev@beckhoff.com Jaehoon New
[U-Boot] Add xxhash hashing support [U-Boot] Add xxhash hashing support - - - - 0 0 0 2018-03-05 dunaev@tecon.ru trini Changes Requested
[U-Boot] dm: pcie: designware: add correct ATU handling [U-Boot] dm: pcie: designware: add correct ATU handling - - - - 0 0 0 2018-02-14 igall@marvell.com stroese Accepted
[U-Boot] mx5: Add HAB boot support [U-Boot] mx5: Add HAB boot support - - - - 0 0 0 2018-02-14 andrej.rosano@f-secure.com sbabic Not Applicable
[U-Boot,v3,4/4] arm: imx: mx53loco: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2018-01-16 linux-kernel-dev@beckhoff.com sbabic Awaiting Upstream
[U-Boot,v3,3/4] arm: imx: m53evk: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2018-01-16 linux-kernel-dev@beckhoff.com sbabic Awaiting Upstream
[U-Boot,v3,2/4] arm: imx: cx9020: move dram init into common place arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2018-01-16 linux-kernel-dev@beckhoff.com sbabic Awaiting Upstream
[U-Boot,v3,1/4] arm: imx: cx9020: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2018-01-16 linux-kernel-dev@beckhoff.com sbabic Awaiting Upstream
[U-Boot,v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT [U-Boot,v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT - - - - 0 0 0 2018-01-09 ying.zhang22455@nxp.com yorksun Accepted
[U-Boot] freescale: vid: add support LTC3882 and rework of the VID support [U-Boot] freescale: vid: add support LTC3882 and rework of the VID support - - - - 0 0 0 2017-12-20 ying.zhang22455@nxp.com yorksun Changes Requested
[U-Boot] freescale: vid: add support LTC3882 and rework of the VID support [U-Boot] freescale: vid: add support LTC3882 and rework of the VID support - - - - 0 0 0 2017-12-20 ying.zhang22455@nxp.com yorksun Superseded
[U-Boot,v2,4/4] arm: imx: mx53loco: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2017-12-18 linux-kernel-dev@beckhoff.com sbabic Changes Requested
[U-Boot,v2,3/4] arm: imx: m53evk: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2017-12-18 linux-kernel-dev@beckhoff.com sbabic Changes Requested
[U-Boot,v2,2/4] arm: imx: cx9020: move dram init into common place arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2017-12-18 linux-kernel-dev@beckhoff.com sbabic Changes Requested
[U-Boot,v2,1/4] arm: imx: cx9020: remove usage of mx53_dram_size arm: imx53: remove usage of mx53_dram_size - - - - 0 0 0 2017-12-18 linux-kernel-dev@beckhoff.com sbabic Changes Requested
[U-Boot] arm: imx: cx9020: remove usage of mx53_dram_size [U-Boot] arm: imx: cx9020: remove usage of mx53_dram_size - - - - 0 0 0 2017-12-15 linux-kernel-dev@beckhoff.com sbabic Changes Requested
[U-Boot] arm: imx: add tzic interrupt controller for imx53 [U-Boot] arm: imx: add tzic interrupt controller for imx53 - - 1 - 0 0 0 2017-12-11 linux-kernel-dev@beckhoff.com sbabic Accepted
[U-Boot] SPL: FIT: Kconfig: Change SPL_FIT_IMAGE_POST_PROCESS entry [U-Boot] SPL: FIT: Kconfig: Change SPL_FIT_IMAGE_POST_PROCESS entry - - - - 0 0 0 2017-10-02 ext-vasily.gurevich@vaisala.com trini Accepted
[U-Boot] ARM: DRA72x: Add support for detection of DRA71x SR 2.1 - - 1 - 0 0 0 2017-08-26 vishalm@ti.com trini Accepted
[U-Boot] armv8/ls1088a: configure PMU's PCTBENR to enable WDT - - - - 0 0 0 2017-08-22 ying.zhang22455@nxp.com yorksun Changes Requested
[U-Boot,2/2] imx: cx9020: try pxe boot, if no vmlinuz on mmc - - - - 0 0 0 2017-07-11 linux-kernel-dev@beckhoff.com sbabic Accepted
[U-Boot,1/2] imx: cx9020: use fdt_addr_r and ramdisk_addr_r - - - - 0 0 0 2017-07-11 linux-kernel-dev@beckhoff.com sbabic Accepted
[U-Boot,2/2] pinctrl: a3700: Fix the issue that gpio controller is registered with wrong node id - - 1 - 0 0 0 2017-06-22 make@marvell.com stroese Awaiting Upstream
[U-Boot,1/2] pinctrl: a3700: Fix uart2 group selection register mask - - 1 - 0 0 0 2017-06-22 make@marvell.com stroese Awaiting Upstream
[U-Boot,2/2] pinctrl: a3700: Fix the issue that gpio controller is registered with wrong node id - - - - 0 0 0 2017-06-22 make@marvell.com Superseded
[U-Boot,1/2] pinctrl: a3700: Fix uart2 group selection register mask - - - - 0 0 0 2017-06-22 make@marvell.com Superseded
[U-Boot,10/10] net: mvpp2x: Set BM poll size once during priv probe 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,09/10] net: mvpp2x: remove TX drain from transmit routine 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,08/10] net: mvpp2x: Set BM pool high address 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,07/10] net: mvpp2x: Remove IRQ configuration from u-boot 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,06/10] net: mvpp2x: remove MBUS configurations from MvPP22 driver 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,05/10] net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,04/10] net: mvpp2x: fix BM configuration overrun issue - - 1 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,03/10] net: mvpp2x: Enable GoP packet padding in TX - - 1 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,02/10] net: mvpp2x: fix phy connected to wrong mdio issue - - 1 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,01/10] net: mvpp2x: Add GPIO configuration support 1 - 2 1 0 0 0 2017-06-21 stefanc@malvell.com stroese Superseded
[U-Boot,v2] arm64: mvebu: use single defconfig for Armada8K development boards - - - - 0 0 0 2017-06-13 igall@marvell.com stroese Awaiting Upstream
[U-Boot] arm64: mvebu: use single defconfig for Armada8K development boards - - - - 0 0 0 2017-06-07 igall@marvell.com stroese Superseded
[U-Boot] arm64: ls2088ardb: Add distro boot support - - - - 0 0 0 2017-06-05 ying.zhang22455@nxp.com yorksun Accepted
[U-Boot,v7] usb: gadget: avoid variable name clipping in cb_getvar 1 - 1 - 0 0 0 2017-05-09 nicolas.le.bayon@st.com trini Accepted
[U-Boot,v7] usb: gadget: avoid variable name clipping in cb_getvar 1 - 1 - 0 0 0 2017-04-25 nicolas.le.bayon@st.com trini Deferred
[U-Boot,v2,13/13] fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,12/13] fix: phy: marvell: cp110: rename comphy_index to cp_index - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,11/13] fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,10/13] phy: marvell: print comphy status even when it's disconnected - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,09/13] fix: phy: marvell: cp110: fix comphy lane 4 selection options - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,08/13] phy: marvell: cp110: add 5G XFI mode - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,07/13] fix: phy: marvell: cp110: update comphy selector option - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,06/13] fix: phy: marvell: cp110: sata: update analog parameters according to latest ETP - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,05/13] fix: phy: marvell: cp110: fix the KR/SFI line 4 selector - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,04/13] phy: marvell: add IGNORE COMPHY type - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,03/13] phy: marvell: cp110: update utmi phy connection type - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,02/13] phy: marvell: cp110: add support for end point configuration - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,v2,01/13] phy: marvell: Replace PHY_TYPE_KR with PHY_TYPE_SFI - - 1 - 0 0 0 2017-04-24 igall@marvell.com stroese Awaiting Upstream
[U-Boot,13/13] fix: phy: marvell: comphy: cp110: pcie: update analog parameters according to late... - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,12/13] fix: phy: marvell: comphy: cp110: rename comphy_index to cp_index - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Superseded
[U-Boot,11/13] fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,10/13] phy: marvell: comphy: print comphy status even when it's disconnected - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,09/13] fix: phy: marvell: comphy: cp110: fix comphy lane 4 selection options - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,08/13] phy: marvell: comphy: cp110: add 5G XFI mode - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,07/13] fix: phy: marvell: comphy: cp110: update comphy selector option - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,06/13] fix: phy: marvell: comphy: cp110: sata: update analog parameters according to late... - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,05/13] fix: phy: marvell: comphy: cp110: fix the KR/SFI line 4 selector - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,04/13] phy: marvell: comphy: add IGNORE COMPHY type - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,03/13] phy: marvell: comphy: cp110: update utmi phy connection type - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,02/13] phy: marvell: comphy: cp110: add support for end point configuration - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Accepted
[U-Boot,01/13] phy: marvell: comphy: Replace PHY_TYPE_KR with PHY_TYPE_SFI - - - - 0 0 0 2017-04-23 igall@marvell.com stroese Superseded
[U-Boot,RESEND,v6] usb: gadget: avoid variable name clipping in cb_getvar 1 - 1 - 0 0 0 2017-04-03 nicolas.le.bayon@st.com lmajewski Accepted
[U-Boot,7/7] scsi: dts: a3700: add scsi node - - 2 1 0 0 0 2017-03-23 make@marvell.com sjg Changes Requested
[U-Boot,6/7] scsi: a3700: enable mvebu scsi driver - - 3 1 0 0 0 2017-03-23 make@marvell.com sjg Deferred
[U-Boot,5/7] scsi: mvebu: add scsi driver - - 3 1 0 0 0 2017-03-23 make@marvell.com sjg Deferred
« 1 2 3 4813 814 »