Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 440 441 Next »
Filters: Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v2,03/16] apalis/colibri_t20/t30: integrate recovery mode detection 0 0 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,02/16] ARM: tegra: allow reading recovery mode boot type 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,01/16] ARM: tegra: allow custom usb manufacturer/product/vendor ids/strings 0 1 0 2015-07-20 Marcel Ziswiler New
[U-Boot,v2,6/6] arm/rpi: Enable dcache 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,5/6] arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailbox 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,4/6] ARM: bcm283x: Allocate all mailbox buffers cacheline aligned 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,3/6] ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,2/6] arm1136/arm1176: Merge cache handling code 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,v2,1/6] arm1136: Remove dead code 0 0 0 2015-07-20 Alexander Stein New
[U-Boot,4/4] arm: rmobile: Add Stout board support 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,3/4] arch: rmobile: add SCIFA port base offsets 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,2/4] serial: serial-sh: SCIFA interface for R-Car Gen2 SoCs 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,1/4] gpio: sh-pfc: fix gpio input read 0 0 0 2015-07-20 Vladimir Barinov New
[U-Boot,12/12] sniper: Keypad support, with recovery and fastboot key combinations 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,11/12] sniper: Power off when the power on reason is not a valid one 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,10/12] sniper: Power button reset support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,09/12] sniper: Fastboot support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,08/12] sniper: Pass serial number through ATAG 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,07/12] sniper: Serial number support, obtained from die ID 0 0 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,06/12] sniper: OMAP3 reboot mode support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,05/12] LG Optimus Black (P970) codename sniper support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,04/12] omap3: Reboot mode support 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,03/12] input: twl4030: Keypad scan and input 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,02/12] input: TWL4030 input support for power button, USB and charger 0 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,01/12] power: twl4030: Power off support 1 1 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,v2,3/3] sunxi: nand: Add information to sunxi that it was run from NAND in SPL 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,v2,2/3] sunxi: nand: Add board configuration options 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,v2,1/3] sunxi: nand: Add basic sunxi NAND driver for SPL with DMA support 0 0 0 2015-07-20 Piotr Zierhoffer New
[U-Boot,1/1] spi: tegra20: Add support for mode selection 0 0 0 2015-07-20 Mirza Krak New
[U-Boot,1/1] ARM: tegra: Add Tegra20 SPI device nodes 0 0 0 2015-07-20 Mirza Krak New
[U-Boot,3/3] mtd: nand: mxs invalidate dcache before DMA read 1 0 0 2015-07-20 Peng Fan New
[U-Boot,2/3] mtd: nand: mxs check maximum ecc that platfrom supports 0 1 0 2015-07-20 Peng Fan New
[U-Boot,resend,1/3] mtd: nand: mxs support oobsize bigger than 512 0 1 0 2015-07-20 Peng Fan New
[U-Boot,5/5] arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,4/5] spl: spl_mmc: Add option to boot from a MMC partition with offset 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,3/5] kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,2/5] kwbimage: Add support for SDIO/MMC boot device selection 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,1/5] arm: mvebu: Add SPL SDIO/MMC boot support 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,11/11] arm: mvebu: db-88f6820: Add SPL support with DDR init code 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,10/11] arm: mvebu: a38x: Use correct PEX register access macros 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,09/11] arm: mvebu: Call timer_init early before PHY and DDR init 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,08/11] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,07/11] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,06/11] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,05/11] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,04/11] Makefile: Fix mvebu build target to use SPL load and exe-address 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,03/11] arm: mvebu: Disable MMU before changing register base address 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,02/11] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-07-20 Stefan Roese New
[U-Boot,v2,01/11] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-07-20 Stefan Roese New
[U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH 0 0 0 2015-07-20 Paul Kocialkowski trini New
[U-Boot,RFC,v2] patman: add distutils based installer 0 0 1 2015-07-18 Chris Packham New
[U-Boot,v4,2/4] nand: lpc32xx: add SLC NAND controller support 1 0 1 2015-07-18 Vladimir Zapolskiy New
[U-Boot,v3,2/4] nand: lpc32xx: add SLC NAND controller support 0 0 0 2015-07-17 Vladimir Zapolskiy New
[U-Boot,v2,4/4] lpc32xx: devkit3250: add spl build support 0 0 0 2015-07-17 Vladimir Zapolskiy New
[U-Boot,v2,3/4] lpc32xx: devkit3250: update of board configuration 0 0 0 2015-07-17 Vladimir Zapolskiy New
[U-Boot,v2,2/4] nand: lpc32xx: add SLC NAND controller support 0 0 0 2015-07-17 Vladimir Zapolskiy New
[U-Boot,v2,1/4] spl: nand: simple: replace readb() with chip specific read_buf() 1 0 0 2015-07-17 Vladimir Zapolskiy New
[U-Boot,v5,5/5] tricorder: switch to CONFIG_SYS_THUMB_BUILD 0 0 0 2015-07-17 Albert ARIBAUD New
[U-Boot,v5,4/5] openrd: switch to CONFIG_SYS_THUMB_BUILD 0 0 0 2015-07-17 Albert ARIBAUD New
[U-Boot,v5,3/5] kirkwood: support CONFIG_SYS_THUMB_BUILD 0 0 0 2015-07-17 Albert ARIBAUD New
[U-Boot,v5,2/5] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 0 0 0 2015-07-17 Albert ARIBAUD New
[U-Boot,v5,1/5] stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD 0 0 0 2015-07-17 Albert ARIBAUD New
[U-Boot,3/3] usb: lpc32xx: add host USB driver 0 0 0 2015-07-17 slemieux.tyco@gmail.com New
[U-Boot,2/3] dma: lpc32xx: add DMA driver 0 0 0 2015-07-17 slemieux.tyco@gmail.com New
[U-Boot,1/3] nand: lpc32xx: add SLC NAND driver 0 0 0 2015-07-17 slemieux.tyco@gmail.com New
[U-Boot] image: fix Android ramdisk support when dtb is specified 0 0 0 2015-07-17 Rob Herring New
[U-Boot,v2,4/4] ARM: dts: UniPhier: add GPIO controller nodes 0 0 0 2015-07-17 Masahiro Yamada sjg New
[U-Boot,v2,3/4] ARM: UniPhier: enable UniPhier GPIO driver 0 0 0 2015-07-17 Masahiro Yamada sjg New
[U-Boot,v2,2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier 0 0 0 2015-07-17 Masahiro Yamada sjg New
[U-Boot,v2,1/4] gpio: UniPhier: add driver for UniPhier GPIO controller 0 0 0 2015-07-17 Masahiro Yamada sjg New
[U-Boot,RFC] am33xx: add 600us wait in DDR3 initialization sequence 0 1 0 2015-07-17 Egli, Samuel New
[U-Boot] zynq: enable CONFIG_NET_RANDOM_ETHADDR 0 0 0 2015-07-17 Masahiro Yamada monstr New
[U-Boot,4/4] sunxi: nand: Add information to sunxi that it was run from NAND in SPL 0 0 0 2015-07-16 Piotr Zierhoffer New
[U-Boot,3/4] sunxi: nand: Add a20_nandread command to load image from NAND in SPL 0 0 0 2015-07-16 Piotr Zierhoffer New
[U-Boot,2/4] sunxi: nand: Add board configuration options 0 0 0 2015-07-16 Piotr Zierhoffer New
[U-Boot,1/4] sunxi: nand: Add basic sunxi NAND driver with DMA support 0 0 0 2015-07-16 Piotr Zierhoffer New
[U-Boot,v2,6/6] spi: cadence_qspi: get fifo width from device tree 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,v2,5/6] spi: cadence_qspi: fix base trigger address & transfer start address 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,v2,4/6] spi: cadence_qspi: fix indirect read/write start address 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,v2,3/6] spi: cadence_qspi: remove sram polling from flash write 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,v2,2/6] spi: cadence_qspi: remove sram polling from flash read 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,v2,1/6] spi: cadence_qspi: move trigger base configuration in init 0 0 0 2015-07-16 Vikas Manocha New
[U-Boot,4/4] lpc32xx: devkit3250: add spl build support 0 0 0 2015-07-15 Vladimir Zapolskiy New
[U-Boot,3/4] lpc32xx: devkit3250: update of board configuration 0 0 0 2015-07-15 Vladimir Zapolskiy New
[U-Boot,2/4] nand: lpc32xx: add SLC NAND controller support 0 0 0 2015-07-15 Vladimir Zapolskiy New
[U-Boot,1/4] spl: nand: simple: replace readb() with chip specific read_buf() 0 0 0 2015-07-15 Vladimir Zapolskiy New
[U-Boot,2/2] arm: bcmcygnus: Enable Ethernet support 0 0 0 2015-07-15 Steve Rae New
[U-Boot,1/2] net: phy: broadcom: Add BCM Cygnus PHY 0 0 0 2015-07-15 Steve Rae New
[U-Boot,RFC] lib/fdtdec: Fix compiling warning for debug 0 0 0 2015-07-15 York Sun New
[U-Boot,2/2] net: lpc32xx: add RMII phy mode support 0 0 1 2015-07-15 LEMIEUX, SYLVAIN New
[U-Boot] RFC: dm: Add pointer checking for allocated data 0 0 0 2015-07-15 Joe Hershberger sjg New
[U-Boot] arm: mvebu: Call timer_init early before PHY and DDR init 0 0 1 2015-07-15 Stefan Roese New
[U-Boot,1/1] net: phy: delay only if reset handler is registered 0 0 0 2015-07-15 Jörg Krause New
[U-Boot,1/1] net: phy: fix data type of phy_id 0 0 0 2015-07-15 Jörg Krause New
[U-Boot,v3] arm: mvebu: add Armada XP SATA support 0 0 1 2015-07-15 Anton Schubert New
[U-Boot,v2] add Armada XP SATA support 0 0 1 2015-07-15 Anton Schubert New
[U-Boot,RFC] patman: add distutils based installer 1 0 0 2015-07-15 Chris Packham New
[U-Boot] arm: mvebu: increase delay after setting ddr3 training patterns 0 0 0 2015-07-15 Anton Schubert New
[U-Boot] arm: mvebu: add Armada XP SATA support 0 0 0 2015-07-15 Anton Schubert New
[U-Boot,RFC,7/7] ARM: select pinctrl drivers from Kconfig 0 0 0 2015-07-15 Masahiro Yamada sjg New