Patches

Show patches with: Archived = No   
« 1 2 ... 149 150 151718 719 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,v2,10/12] dm: pci: Save devfn without bus number in pci_uclass_child_post_bind() 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,09/12] fdtdec: Fix possible infinite loop in fdtdec_get_pci_vendev() 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,07/12] x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe() 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,06/12] x86: baytrail: Remove the fsp_init_phase_pci() call 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,05/12] x86: queensbay: Move unprotect_spi_flash() to arch_misc_init() 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,04/12] x86: fsp: Add comments about U-Boot entering start.S twice 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,03/12] x86: fsp: Enlarge the size of malloc() pool before relocation 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,02/12] x86: fsp: Delay x86_fsp_init() call a little bit 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,v2,01/12] dm: pci: Support selected device/driver binding before relocation 1 - - 0 0 0 2015-08-20 Bin Meng sjg Accepted
[U-Boot,3/3] armv8/gic: Fix GIC v2 initialization - - - 0 0 0 2015-08-20 Thierry Reding aaribaud Accepted
[U-Boot,2/3] armv8/mmu: Set bits marked RES1 in TCR - - - 0 0 0 2015-08-20 Thierry Reding aaribaud Accepted
[U-Boot,1/3] armv8/mmu: Clean up TCR programming - - - 0 0 0 2015-08-20 Thierry Reding aaribaud Accepted
[U-Boot] image: Fix loop condition to avoid warning - 2 - 0 0 0 2015-08-20 Thierry Reding trini Accepted
[U-Boot,6/6] p2571: Remove hard-coded counter frequency - - - 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot,5/6] p2371: Remove hard-coded counter frequency - - - 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot,4/6] e2220-1170: Remove hard-coded counter frequency - - - 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot,3/6] ARM: tegra: clk_m is the architected timer source clock - - - 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot,2/6] ARM: tegra: Implement clk_m - - - 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot,1/6] armv8: Make COUNTER_FREQUENCY optional 1 - 1 0 0 0 2015-08-20 Thierry Reding tomcwarren Accepted
[U-Boot] ARM: tegra: fix PLLP frequency calc on T210 - - - 0 0 0 2015-08-19 Stephen Warren tomcwarren Accepted
[U-Boot,2/2] arm: socfpga: Zap OF_CONTROL checks, it's always enabled - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot,1/2] arm: socfpga: Always enable OF_CONTROL and SPL_OF_CONTROL - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot] ARM: tegra: fix COUNTER_FREQUENCY for T210 - - - 0 0 0 2015-08-19 Stephen Warren tomcwarren Accepted
[U-Boot,PULL] u-boot-usb/master - - - 0 0 0 2015-08-19 Marek Vasut trini Accepted
[U-Boot] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot,2/2] MIPS: fix syntax for fdt_chosen/initrd. - - - 0 0 0 2015-08-19 Govindraj Raja danielschwierzeck Accepted
[U-Boot,linux-sunxi] sunxi: Add support for the Olimex A20 EVB - - - 0 0 0 2015-08-19 codekipper@gmail.com jwrdegoede Accepted
[U-Boot,v7,6/6] net: Move CONFIG_E1000 options to Kconfig 1 - - 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v7,5/6] Tidy up some defconfig files 1 - - 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v7,4/6] net: e1000: Add Kconfig options 1 - - 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v7,3/6] net: e1000: Convert to driver model 1 - 1 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v7,2/6] net: e1000: Prepare for driver model conversion 1 - 1 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v7,1/6] net: e1000: Move #include of common.h to the C files 1 1 1 0 0 0 2015-08-19 Simon Glass jhersh Accepted
[U-Boot,v3] ARM: tegra: Add Tegra20 SPI device nodes - - - 0 0 0 2015-08-19 Mirza Krak tomcwarren Accepted
[U-Boot,v2,4/4] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks() - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot,v2,3/4] board: ti: invoke clock API to enable and disable clocks - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot,v2,2/4] ARM: AM43xx: Add functions to enable and disable USB clocks - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot,v2,1/4] ARM: OMAP5: Add functions to enable and disable USB clocks - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot,GIT,PULL] Zynq changes - - - 0 0 0 2015-08-19 Michal Simek trini Accepted
[U-Boot,2/3] board: ti: OMAP5: added USB initializtion code - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot,1/3] board: ti: beagle_x15: added USB initializtion code - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I trini Accepted
[U-Boot] at91sam9260ek: add missing files to MAINTAINERS - - - 0 0 0 2015-08-19 Andreas Bießmann trini Accepted
[U-Boot] at91sam9rlek: add missing files to MAINTAINERS - - - 0 0 0 2015-08-19 Andreas Bießmann trini Accepted
[U-Boot,v2,3/3] usb: gadget: ether: populate _reset_ callback - 2 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,2/3] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop 1 2 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,1/3] usb: gadget: ether: Perform board initialization from ethernet gadget driver 1 2 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,5/5] include: configs: am43xx_evm: add 'usb stop' in usbboot env - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,4/5] board: ti: remove duplicate initialization of vbus_id_status - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2 - 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,v2,1/5] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts 1 1 - 0 0 0 2015-08-19 Kishon Vijay Abraham I marex Accepted
[U-Boot,3/3] arm: socfpga: Fix ArriaV SoCDK PLL config - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot,2/3] arm: socfpga: Enable ethernet on ArriaV SoCDK - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot,1/3] arm: socfpga: Fix SD/MMC boot on ArriaV SoCDK - - - 0 0 0 2015-08-19 Marek Vasut marex Accepted
[U-Boot] net: e1000: Support 64-bit physical address 1 - - 0 0 0 2015-08-18 York Sun jhersh Accepted
[U-Boot] powerpc: convert selected boards to generic board structure - - - 0 0 0 2015-08-18 York Sun yorksun Accepted
[U-Boot] tftp: adjust settings to be suitable for 100Mbit ethernet 1 - - 0 0 0 2015-08-18 Pavel Machek jhersh Accepted
[U-Boot,v2] net/fman: Support both new and legacy FMan Compatibles - - - 0 0 0 2015-08-18 Igal.Liberman yorksun Accepted
[U-Boot,RESEND,v6] mtd/nand/ubi: assortment of alignment fixes 1 1 - 0 0 0 2015-08-18 Marcel Ziswiler trini Accepted
[U-Boot,5/5] arm: spear: Some changes / updates to the x600 config header - - - 0 0 0 2015-08-18 Stefan Roese trini Accepted
[U-Boot,4/5] arm: spear: Enable caches on SPEAr - - - 0 0 0 2015-08-18 Stefan Roese trini Accepted
[U-Boot,3/5] usb: spear: Add support for both SPEAr600 EHCI controllers - - - 0 0 0 2015-08-18 Stefan Roese trini Accepted
[U-Boot,2/5] arm: spear: Move to common SPL infrastructure - - - 0 0 0 2015-08-18 Stefan Roese trini Accepted
[U-Boot,1/5] arm: spear: Fix booting - relocate vector table to 0 (low-vector) 1 - - 0 0 0 2015-08-18 Stefan Roese trini Accepted
[U-Boot] Pull request: u-boot-spi/master - 1 - 0 0 0 2015-08-18 Jagan Teki trini Accepted
[U-Boot,v3] efi: Update README.efi to clarify build and test instructions 1 - - 0 0 0 2015-08-18 Bin Meng sjg Accepted
[U-Boot,v3] armv8: fsl-lsch3: Rewrite MMU translation table entries - - - 0 0 0 2015-08-18 Alison Wang yorksun Accepted
[U-Boot] patman: use -D option for git format-patch 2 - - 0 0 0 2015-08-18 Masahiro Yamada sjg Accepted
[U-Boot] please pull u-boot-samsung master - - - 0 0 0 2015-08-18 Minkyu Kang trini Accepted
[U-Boot,v1,2/2] powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ram - - - 0 0 0 2015-08-17 York Sun yorksun Accepted
[U-Boot,v1,1/2] powerpc: configs: Fix init_ram physical address for several boards - - - 0 0 0 2015-08-17 York Sun yorksun Accepted
[U-Boot] Please pull u-boot-marvell master - - - 0 0 0 2015-08-17 Luka Perkov trini Accepted
[U-Boot,3/3] sunxi: sunxi-common.h cleanup 1 - - 0 0 0 2015-08-17 Hans de Goede jwrdegoede Accepted
[U-Boot,2/3] sunxi: Switch to using malloc_simple for the spl 1 1 - 0 0 0 2015-08-17 Hans de Goede jwrdegoede Accepted
[U-Boot,V2] ti: qspi: set flash quad bit based on quad support flag - 1 - 0 0 0 2015-08-17 vishalm@ti.com jagan Accepted
[U-Boot] Revert "Align global_data to a 16-byte boundary" - - - 0 0 0 2015-08-17 Simon Glass trini Accepted
[U-Boot] ARM: k2l: Fix device speeds - - 1 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,5/5] ARM: keystone2: Update README - - - 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,4/5] ARM: keystone2: Build MLO by default - 1 - 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,3/5] ARM: keystone2: Rename u-boot-nand.gph to MLO - 1 - 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,2/5] ARM: keystone2: move the custom build rules out to keystone specific makefile - - - 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,1/5] ARM: keystone2: configs: Move SP to end of u-boot section - 1 - 0 0 0 2015-08-17 Lokesh Vutla trini Accepted
[U-Boot,v3] usb: xhci: Fix a potential NULL pointer dereference - - - 0 0 0 2015-08-17 Sergey Temerkhanov marex Accepted
[U-Boot,v2,1/1] arm/ls102xa:add hwconfig setting to support disable unused devices. - - - 0 0 0 2015-08-17 Zhuoyu Zhang yorksun Accepted
[U-Boot,U-Boot,RESEND,v2,09/10] spi: ti_qspi: Use DMA to read from qspi flash - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,10/10] ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,08/10] dma: ti-edma3: Add helper function to support edma3 transfer - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,07/10] sf: ops: Add spi_flash_copy_mmap function - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,06/10] ARM: AM43XX: Add functions to enable and disable EDMA3 clocks - 2 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,05/10] ARM: OMAP5: Add functions to enable and disable EDMA3 clocks - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,04/10] ARM: OMAP5: Add support for disabling clocks in uboot - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,03/10] ARM: AM43xx: Add support for disabling clocks in uboot - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,02/10] env: use cache line aligned memory for flash read - 1 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,U-Boot,RESEND,v2,01/10] sf: allocate cache aligned buffers to copy from flash - 2 - 0 0 0 2015-08-17 Vignesh R jagan Accepted
[U-Boot,3/3] sunxi: Add CONFIG_MMC0_CD_PIN to various boards 1 - - 0 0 0 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,2/3] sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs 1 - - 0 0 0 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,1/3] sunxi: musb: Drop no longer accurate comment in Kconfig help text 1 - - 0 0 0 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,11/11] arm: pxa: colibri_pxa270: add optional i2c support - - - 0 0 0 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,10/11] arm: pxa: colibri_pxa270: add optional lcd support - - - 0 0 0 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,09/11] arm: pxa: colibri_pxa270: add some more nor flash details - - - 0 0 0 2015-08-16 Marcel Ziswiler marex Accepted
« 1 2 ... 149 150 151718 719 »