Show patches with: Archived = No       |   167456 patches
« 1 2 ... 454 455 456 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,2/3] imx: mx6: Update mx6sx registers and clock functions for display - - - - --- 2015-01-14 Ye.Li sbabic Changes Requested
[U-Boot,2/3] imx: mx6: correct IPU clock - - - - --- 2016-03-09 Peng Fan ag Accepted
[U-Boot,2/3] imx: mx6slevk: Add I2C1 support - - - - --- 2014-09-15 Ye.Li sbabic Changes Requested
[U-Boot,2/3] imx: mx6slevk: introduce device tree support - - - - --- 2017-03-04 Peng Fan sbabic Accepted
[U-Boot,2/3] imx: mx6ul configure the PMIC_STBY_REQ pin as open drain - - - - --- 2016-03-09 Peng Fan sbabic Accepted
[U-Boot,2/3] imx: mx6ul_14x14_evk select MX6UL - - - - --- 2015-08-19 Peng Fan sbabic Awaiting Upstream
[U-Boot,2/3] imx: mx6ul_evk: default enable device tree support - - - - --- 2016-03-09 Peng Fan Superseded
[U-Boot,2/3] imx: mx7: psci: add system reset support [U-Boot,1/3] mx7_common: use psci 1.0 instead of 0.1 - - - - --- 2018-01-05 Anson Huang sbabic Superseded
[U-Boot,2/3] imx: nand: update GPMI NAND driver to support MX7 - - - - --- 2015-12-22 Peng Fan sbabic Accepted
[U-Boot,2/3] imx: riotboard: Enable thermal DM support - - - - --- 2015-05-17 Nikolay Dimitrov sbabic Awaiting Upstream
[U-Boot,2/3] imx: wdog: correct wcr register settings - - - 1 --- 2015-09-14 Peng Fan sbabic Awaiting Upstream
[U-Boot,2/3] imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR - - - - --- 2014-09-15 Peng Fan sbabic Awaiting Upstream
[U-Boot,2/3] imximage: Add support for i.MX6 1 - - - --- 2012-01-12 Behme Dirk (CM/ESO2) sbabic Accepted
[U-Boot,2/3] include: configs: am335x: add Atheros phy support 1 - - - --- 2016-10-10 Mugunthan V N jhersh Accepted
[U-Boot,2/3] init_func: Add x86 support - - - - --- 2012-04-22 Graeme Russ Deferred
[U-Boot,2/3] kbuild: add stringify helper to quote a string passed to C files kbuild: always use relative path for __FILE__ - - - - --- 2017-10-13 Masahiro Yamada Superseded
[U-Boot,2/3] kbuild: remove redundant line from (generic-)asm-offsets.h - - - - --- 2015-03-27 Masahiro Yamada trini Accepted
[U-Boot,2/3] kbuild: sync mixed targets handling with Linux 3.16 - - - - --- 2014-08-05 Masahiro Yamada trini Accepted
[U-Boot,2/3] kernel-doc: update kernel-doc related files to Linux v3.13 1 - - - --- 2014-01-30 Masahiro Yamada trini Superseded
[U-Boot,2/3] km/common: fix ramfs development target - - - - --- 2011-09-14 Holger Brunck Accepted
[U-Boot,2/3] lcd: add DataImage SCF0403x LCD panel support - - - - --- 2013-10-09 Nikita Kiryanov ag Superseded
[U-Boot,2/3] led: The gpio_led.c code expects that LED state is from the enum - - - - --- 2013-02-08 Holger Freyther trini Accepted
[U-Boot,2/3] led: The gpio_led.c code expects that LED state is from the enum - - - - --- 2013-01-18 Holger Freyther trini Changes Requested
[U-Boot,2/3] lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value - - 1 - --- 2016-03-03 Stefan Roese trini Accepted
[U-Boot,2/3] lib: rand: add call to hw_rand() - hardware random number generator - - - - --- 2014-02-28 Przemyslaw Marczak trini Changes Requested
[U-Boot,2/3] libfdt: descend from lib/ to lib/libfdt/ - - - - --- 2014-11-28 Masahiro Yamada trini Accepted
[U-Boot,2/3] linux err: make ERR_PTR/PTR_ERR architecture specific make ERR_PTR/PTR_ERR architecture specific - - - - --- 2019-10-22 Simon Goldschmidt trini Accepted
[U-Boot,2/3] lsxl: place the dtb below the inital ramdisk - - - - --- 2015-02-08 Michael Walle trini Accepted
[U-Boot,2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT 1 - - - --- 2012-05-15 Otavio Salvador sbabic Accepted
[U-Boot,2/3] m68k: Don't grab memory for LCD if FB address is defined - - - - --- 2011-03-08 Minkyu Kang Changes Requested
[U-Boot,2/3] m68k: Remove empty #ifdef/#ifndef block [U-Boot,1/3] configs: Remove empty #ifdef/#ifndef blocks - - - - --- 2018-06-04 Chris Packham trini Accepted
[U-Boot,2/3] m68k: add mcf5307 cpu support - - - - --- 2015-02-12 Angelo Dureghello trini Accepted
[U-Boot,2/3] m68k: eliminate warnings in do_bootm_linux function - - - - --- 2013-10-16 Masahiro Yamada trini Deferred
[U-Boot,2/3] microblaze: Add option to pass cpu version number - - - - --- 2016-05-24 Michal Simek monstr Accepted
[U-Boot,2/3] microblaze: Enable phylib and mii support - - - - --- 2011-12-21 Stephan Linz monstr Superseded
[U-Boot,2/3] microblaze: Moved ethernet PHY configs of Microblaze board to defconfig [U-Boot,1/3] arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig - - - - --- 2018-01-24 Michal Simek monstr Accepted
[U-Boot,2/3] microblaze: Wire up dts configuration - - - - --- 2012-07-04 Stephan Linz monstr Accepted
[U-Boot,2/3] microblaze: avoid compile error on systems without cfi flash - - - - --- 2012-06-26 Stephan Linz Accepted
[U-Boot,2/3] mips: add initial support for qca956x referenced board [U-Boot,1/3] drivers: ag7xxx: add support for qca956x-s17 - - - - --- 2019-02-15 Rosy Song danielschwierzeck Superseded
[U-Boot,2/3] mips: ath79: Drop SYS_MIPS_CACHE_INIT_RAM_LOAD - - - - --- 2016-01-27 Marek Vasut danielschwierzeck RFC
[U-Boot,2/3] mips: mt76xx: gardena-smart-gateway: Misc updates to defconfig [U-Boot,1/3] mips: mt7628: Change compatible property of the ethernet DT node - - - - --- 2018-11-28 Stefan Roese danielschwierzeck Accepted
[U-Boot,2/3] misc: fs_loader: Use device_get_global_by_ofnode to get to node [U-Boot,1/3] fs: Makefile: Add fs.c under SPL as well as it is needed for fs_loader - - 1 - --- 2018-11-05 J, KEERTHY trini Accepted
[U-Boot,2/3] misc:pmic: Enable PMIC handling at u-boot startup code - - - - --- 2011-09-26 Łukasz Majewski sbabic Changes Requested
[U-Boot,2/3] misc:pmic:max8997 MAX8997 support for PMIC driver - - - - --- 2012-03-28 Łukasz Majewski Superseded
[U-Boot,2/3] mkconfig: create CONFIG_ defines without relying on GNU extensions - - - - --- 2011-07-19 Jeroen Hofstee Superseded
[U-Boot,2/3] mkimage: Add variable lenght header support - - - - --- 2011-09-16 Stefano Babic wd Accepted
[U-Boot,2/3] mmc: Add bcm2835 sdhost controller Rpi: Add support for second sd host controller - - - - --- 2018-01-16 Alexander Graf Superseded
[U-Boot,2/3] mmc: Convert HI6220 MMC driver to driver model [U-Boot,1/3] include: configs: Add gunzip size for HiKey board - - 1 - --- 2018-12-20 'Manivannan Sadhasivam' trini Changes Requested
[U-Boot,2/3] mmc: Convert mmc struct's name array to a pointer - - - - --- 2014-03-12 Pantelis Antoniou panto Accepted
[U-Boot,2/3] mmc: add the debug message in mmc_set_clock [U-Boot,1/3] mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h - - - - --- 2018-01-26 Jaehoon Chung Jaehoon Accepted
[U-Boot,2/3] mmc: dwmmc: socfpga: Convert to DM - - 1 - --- 2015-11-30 Marek Vasut marex Accepted
[U-Boot,2/3] mmc: exynos_dw_mmc: set to clksel_val into board-init function - - - - --- 2015-02-04 Jaehoon Chung panto Accepted
[U-Boot,2/3] mmc: fsl_esdhc: clean up code mmc: fsl_esdhc: clean up code - - - - --- 2019-08-19 Yangbo Lu freenix Superseded
[U-Boot,2/3] mmc: fsl_esdhc: clean up register definition [U-Boot,1/3] mmc: fsl_esdhc: add esdhc_imx flag 1 - - - --- 2019-02-14 Yangbo Lu prabhu_kush Superseded
[U-Boot,2/3] mmc: fsl_esdhc: remove redundant DM_MMC checking mmc: fsl_esdhc: clean up driver - - - - --- 2019-10-21 Yangbo Lu freenix Accepted
[U-Boot,2/3] mmc: fsl_esdhc: remove the duplcated header file - - 1 - --- 2016-07-19 Jaehoon Chung Jaehoon Accepted
[U-Boot,2/3] mmc: hi6220_dw_mmc: add compatible for Poplar support Enable mmc driver model for Poplar board 1 - - - --- 2019-01-17 Shawn Guo trini Accepted
[U-Boot,2/3] mmc: invalidate block cache after hwpart switched successfully [U-Boot,1/3] Revert "blk: Invalidate block cache when switching hwpart" - - - 1 --- 2019-08-27 Weijie Gao (高惟杰) trini Accepted
[U-Boot,2/3] mmc: omap_mmc: Remove invert references with gpio xlate available [U-Boot,1/3] gpio: omap_gpio: Add xlate function to support GPIO_ACTIVE_LOW - - - - --- 2018-09-05 Adam Ford trini Superseded
[U-Boot,2/3] mmc: s5p_mmc: fixed wrong function argument - - - - --- 2012-07-20 Jaehoon Chung afleming Changes Requested
[U-Boot,2/3] mmc: sdhci: add the DMA select for SDMA - - - - --- 2012-09-21 Jaehoon Chung afleming Accepted
[U-Boot,2/3] mmc: sh_mmcif: Add Kconfig entry [U-Boot,1/3] mmc: sh_mmcif: Add DM and DT probing support - - - - --- 2018-04-21 Marek Vasut marex Accepted
[U-Boot,2/3] mmc: sh_sdhi: Fix the ACMD handling - - 1 - --- 2017-07-21 Marek Vasut Jaehoon Accepted
[U-Boot,2/3] mmc: split fsl_esdhc driver for i.MX [U-Boot,1/3] Move CONFIG_FSL_ESDHC to defconfig - - - - --- 2019-02-21 Yangbo Lu sbabic Superseded
[U-Boot,2/3] mmc: store hwpart in the block device - - 1 - --- 2015-12-07 Stephen Warren trini Accepted
[U-Boot,2/3] mmc: use block layer in mmc command - - 1 - --- 2016-03-27 Eric Nelson trini Accepted
[U-Boot,2/3] mmc: zynq: Determine base clock frequency via clock framework - - - - --- 2016-11-21 Stefan Herbrechtsmeier Jaehoon Superseded
[U-Boot,2/3] moveconfig: Allow control of which implying configs are shown - - - - --- 2017-06-16 Simon Glass sjg Accepted
[U-Boot,2/3] mpc83xx/pci: Register IMMR region [U-Boot,1/3] pci: Don't use pci_indirect when DM is active - - - - --- 2018-03-28 Mario Six mariosix Changes Requested
[U-Boot,2/3] mpc83xx: mpc8360emds - fix gcc 4.6 compiler warning - - - - --- 2011-11-16 Kim Phillips Accepted
[U-Boot,2/3] mpc85xx: Add a board-specific restart hook - - - - --- 2011-10-18 Kyle Moffett galak Superseded
[U-Boot,2/3] mpc85xx: Add deep sleep framework support - - - - --- 2014-01-26 tang yuantian yorksun Superseded
[U-Boot,2/3] mpc85xx: Add inline GPIO acessor functions - - - - --- 2011-10-19 Kyle Moffett galak Accepted
[U-Boot,2/3] mpc85xx: configs - Enable blob command in freescale platforms - - - - --- 2014-10-07 Ruchika Gupta Not Applicable
[U-Boot,2/3] mpc85xx: configs - Enable blob command in freescale platforms - - - - --- 2014-09-25 Ruchika Gupta Superseded
[U-Boot,2/3] mtd, cfi: introduce void flash_protect_default(void) - - - - --- 2011-04-04 Heiko Schocher stroese Accepted
[U-Boot,2/3] mtd, nand: move common functions from cmd_nand.c to common place - - - - --- 2014-07-14 Heiko Schocher hs Superseded
[U-Boot,2/3] mtd/ifc: Add support of 8K page size NAND flash - - - - --- 2013-09-24 Prabhakar Kushwaha Superseded
[U-Boot,2/3] mtd/nand : workaround for Freescale FCM to support 4k pagesize Nand chip - - - - --- 2011-11-22 Shengzhou Liu scottwood Changes Requested
[U-Boot,2/3] mtd: Introduce mtd_block_isreserved() - - - 1 --- 2015-06-27 Scott Wood scottwood Accepted
[U-Boot,2/3] mtd: OMAP: Enable GPMC prefetch mode for 16 bit access - - 1 - --- 2015-05-30 Jeroen Hofstee trini Accepted
[U-Boot,2/3] mtd: cfi_flash: Use ARRAY_SIZE at appropriate places - - - - --- 2013-06-22 Axel Lin trini Accepted
[U-Boot,2/3] mtd: nand: mxs check maximum ecc that platfrom supports - - 1 - --- 2015-07-20 Peng Fan scottwood Superseded
[U-Boot,2/3] mtd: nand: pxa3xx: re-read a page in raw mode on uncorrectable error Add raw read support and use it in pxa3xx NAND driver - - - - --- 2018-10-11 Miquel Raynal jagan Accepted
[U-Boot,2/3] mtd: rawnand: denali: Allow operation without clock driver [U-Boot,1/3] mtd: rawnand: denali-spl: Add missing hardware init - - - - --- 2019-11-20 Marek Vasut marex Superseded
[U-Boot,2/3] mtd: sf: Add support AT26DF081A chip - - - - --- 2015-09-15 Yao Yuan jagan Accepted
[U-Boot,2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH [U-Boot,1/3] spi: Kconfig: Mark CONFIG_SPI as Legacy spi support - - - - --- 2019-02-09 Jagan Teki jagan Accepted
[U-Boot,2/3] mtd: spi: add MSCC SPI flash driver mtd: spi: Add MSCC SPI flash driver - - - - --- 2019-01-16 Horatiu Vultur danielschwierzeck Deferred
[U-Boot,2/3] mtd: spi_dataflash: Use spi read then write [U-Boot,1/3] spi: Add spi_write_then_read - - - - --- 2019-07-22 Jagan Teki jagan Accepted
[U-Boot,2/3] musb: Properly call musb_stop() on probe failure - - - - --- 2016-04-02 Hans de Goede marex Accepted
[U-Boot,2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver [U-Boot,1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4 - - 1 - --- 2018-05-24 xswang@marvell.com stroese Superseded
[U-Boot,2/3] mx23: Enable bit 24 of HW_DRAM_CTL08 as did in imx-bootlets - - - - --- 2013-01-26 Otavio Salvador Not Applicable
[U-Boot,2/3] mx23evk: Add splash screen support - - - - --- 2013-05-10 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,2/3] mx23evk: Do not set voltage selection bit for SSP pads - - - - --- 2013-05-06 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE 1 - - - --- 2013-01-28 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,2/3] mx25: fix compilation when CONFIG_FSL_ESDHC is enabled - - - - --- 2012-09-22 Eric Benard sbabic Changes Requested
[U-Boot,2/3] mx25pdk: Add esdhc support - - - - --- 2012-10-11 Fabio Estevam sbabic Changes Requested
[U-Boot,2/3] mx27: timer.c: Fix Codyng Style - - - - --- 2011-10-02 Fabio Estevam Changes Requested
[U-Boot,2/3] mx28evk: Add 'nandboot' environment command - - - - --- 2013-10-12 Otavio Salvador sbabic Superseded
[U-Boot,2/3] mx28evk: Add a target for SPI NOR boot - - - - --- 2014-05-08 Fabio Estevam sbabic Changes Requested
« 1 2 ... 454 455 456 … 1674 1675 »