| [U-Boot,-,resend,due,to,bounce] libfdt: Add fdt functionality for more intuitive |
2012-05-07 |
Peter Feuerer |
gvb |
Rejected |
| [U-Boot,0/1] Davinci: Make MAC address offset in EEPROM configurable |
2013-02-01 |
Kim Bøndergaard |
trini |
Not Applicable |
| [U-Boot,0/1] Delete sbc8650 / sbc8540 support. |
2012-09-26 |
Paul Gortmaker |
trini |
Accepted |
| [U-Boot,0/1] at91: USART3_BASE use AT91_DBGU_BASE instead of (AT91_BASE_SYS + AT91_DBGU) |
2010-12-12 |
Asen Dimov |
reinhardm |
Rejected |
| [U-Boot,0/1] pm9261: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/1] pm9263: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/1] pm9g45: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/2] ARMV7: Fixing Vexpress build errors and warnings |
2010-11-29 |
Dirk Behme |
wd |
Accepted |
| [U-Boot,0/2] Davinci, MAC addr improvements |
2013-01-22 |
Kim Bøndergaard |
trini |
Superseded |
| [U-Boot,0/2] Davinci: MAC address updates |
2013-01-29 |
Kim Bøndergaard |
trini |
Superseded |
| [U-Boot,0/2] Highbank fixes for 2012.03 |
2012-02-29 |
Rob Herring |
aaribaud |
Not Applicable |
| [U-Boot,0/3] Tegra 2 USB ULPI series |
2012-08-20 |
Lucas Stach |
tomcwarren |
Not Applicable |
| [U-Boot,01/01] nds32: add header files support for nds32 |
2010-10-20 |
Macpaul Lin |
macpaul |
Superseded |
| [U-Boot,01/08] omap4: Remove CONFIG_SYS_MMC_SET_DEV |
2012-04-13 |
Tom Rini |
trini |
Accepted |
| [U-Boot,01/09] powerpc/mpc85xx: Few updates for B4860 cpu changes |
2012-12-21 |
Poonam Aggrwal |
afleming |
Superseded |
| [U-Boot,01/10,V3] ARCH: SPL: Add parametric board initializer |
2012-06-29 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,01/10,V4] ARCH: SPL: Add parametric board initializer |
2012-06-29 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,01/10,V5] ARCH: SPL: Add parametric board initializer |
2012-07-02 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,01/10,V6] ARCH: SPL: Add parametric board initializer |
2012-07-04 |
Rajeshwari Shinde |
prom |
Accepted |
| [U-Boot,01/10,v2] net: rtl8169: Add initialized eth_device structure |
2010-10-19 |
Nobuhiro Iwamatsu |
|
Accepted |
| [U-Boot,01/10] ARM: dove: add support for Marvell Dove SoC |
2012-12-02 |
Sebastian Hesselbarth |
prafulla@marvell.com |
Rejected |
| [U-Boot,01/10] ARM: move interrupt_init to before relocation |
2013-05-15 |
Rob Herring |
aaribaud |
Superseded |
| [U-Boot,01/10] ARM: remove broken "SMN42" board. |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,01/10] Display RDIMM if detected |
2010-12-09 |
York Sun |
galak |
Changes Requested |
| [U-Boot,01/10] GCC4.6: Squash warning in mpc5121ads.c |
2011-10-25 |
Marek Vasut |
|
Accepted |
| [U-Boot,01/10] MIPS: mips32/start.S: use t8 register for dynamic relocation |
2013-06-13 |
Gabor Juhos |
danielschwierzeck |
Awaiting Upstream |
| [U-Boot,01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board |
2013-01-23 |
Gabor Juhos |
danielschwierzeck |
Superseded |
| [U-Boot,01/10] am33xx: convert defines from am33xx-specific to generic names |
2013-02-13 |
Matt Porter |
trini |
Deferred |
| [U-Boot,01/10] dm: arm: Remove support for lpc2292 |
2012-07-21 |
Marek Vasut |
|
Superseded |
| [U-Boot,01/10] doc/ramboot.mpc85xx: Documented the RAMBOOT for MPC85xx |
2013-03-22 |
York Sun |
|
Superseded |
| [U-Boot,01/10] drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning |
2011-11-19 |
Anatolij Gustschin |
|
Accepted |
| [U-Boot,01/10] km/common: rework and simplify default environment |
2011-06-06 |
Holger Brunck |
|
Superseded |
| [U-Boot,01/10] lcd, amba: remove this frame buffer driver since it is not used |
2013-01-12 |
Jeroen Hofstee |
ag |
Superseded |
| [U-Boot,01/10] microblaze: Fix in/out_be8/16/32 functions |
2011-08-31 |
Michal Simek |
|
Changes Requested |
| [U-Boot,01/10] mx53loco: Remove unused SOBJS |
2012-05-29 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,01/10] mx5: Undeclare imx_decode_pll() |
2012-08-14 |
Benoît Thébaudeau |
sbabic |
Accepted |
| [U-Boot,01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT |
2013-01-30 |
Otavio Salvador |
sbabic |
Changes Requested |
| [U-Boot,01/10] pxe: Use ethact setting for pxe |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,01/10] remove CONFIG_SC3 from cmd_ide.c |
2012-10-07 |
Pavel Herrmann |
trini |
Accepted |
| [U-Boot,01/10] usb: Remove obsolete header file |
2012-11-29 |
Pantelis Antoniou |
marex |
Superseded |
| [U-Boot,01/11,v2] snowball: Add support for ux500 based snowball board |
2012-07-05 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,01/11,v2] snowball: Add support for ux500 based snowball board |
2012-06-19 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,01/11,v2] snowball: Add support for ux500 based snowball board |
2012-08-03 |
mathieu.poirier@linaro.org |
trini |
Accepted |
| [U-Boot,01/11,v3] Exynos5: config: enable time command |
2013-03-28 |
Akshay Saraswat |
prom |
Accepted |
| [U-Boot,01/11] Blackfin: bf60x: new processor header files |
2013-02-07 |
Sonic Zhang |
trini |
Superseded |
| [U-Boot,01/11] DM: add block device core |
2012-09-20 |
Pavel Herrmann |
marex |
Superseded |
| [U-Boot,01/11] FEC: Use proper accessor to read register in debug call |
2011-09-08 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,01/11] FEC: Use proper accessor to read register in debug call |
2011-09-12 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,01/11] MIPS: board.c: make checkpatch.pl clean |
2011-11-24 |
Daniel Schwierzeck |
|
Superseded |
| [U-Boot,01/11] MIPS: bootm: fix checkpatch.pl warnings |
2013-06-08 |
Daniel Schwierzeck |
danielschwierzeck |
Superseded |
| [U-Boot,01/11] MX3: qong: use new pmic driver |
2011-10-08 |
Stefano Babic |
|
Accepted |
| [U-Boot,01/11] Orion5x: Correct DRAM bank detection |
2011-03-18 |
Rogan Dawes |
|
Not Applicable |
| [U-Boot,01/11] arm: add MMU/d-cache support for Faraday cores |
2013-03-29 |
Kuo-Jung Su |
aaribaud |
Superseded |
| [U-Boot,01/11] arm: ks8695: use defined constants for UART |
2012-10-05 |
Yann Vernier |
aaribaud |
Accepted |
| [U-Boot,01/11] imximage: make header variable length |
2012-09-19 |
Troy Kisky |
|
Changes Requested |
| [U-Boot,01/11] powerpc/85xx: Replace CONFIG_SYS_HAS_SERDES with a weak function |
2010-12-17 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,01/11] snowball: Add support for ux500 based snowball board |
2012-06-18 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,01/11] snowball: Add support for ux500 based snowball board |
2012-07-31 |
mathieu.poirier@linaro.org |
trini |
Changes Requested |
| [U-Boot,01/11] snowball: Add support for ux500 based snowball board |
2012-06-18 |
mathieu.poirier@linaro.org |
trini |
Superseded |
| [U-Boot,01/11] st_smi: Add support for SPEAr SMI driver |
2012-02-24 |
Amit Virdi |
stroese |
Superseded |
| [U-Boot,01/11] tegra: introduce config option to do table based pinmux |
2013-01-24 |
Lucas Stach |
tomcwarren |
Deferred |
| [U-Boot,01/12] ARM: DRA7xx: Add control id code for DRA7xx |
2013-05-29 |
Lokesh Vutla |
trini |
Superseded |
| [U-Boot,01/12] ARM: arm1176: enable instruction cache in arch_cpu_init() |
2012-07-04 |
Stephen Warren |
trini |
Accepted |
| [U-Boot,01/12] Davinci: ea20: set console on UART0 |
2011-10-05 |
Stefano Babic |
spaulraj |
Accepted |
| [U-Boot,01/12] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() |
2011-11-07 |
Tom Rini |
|
Superseded |
| [U-Boot,01/12] arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,01/12] cmd_sf: Add wr_inst argument to 'sf write' command |
2012-12-31 |
Jagannadha Sutradharudu Teki |
jagan |
Under Review |
| [U-Boot,01/12] da850: indicate cache usage disable in config file |
2011-08-02 |
nagabhushana.netagunte@ti.com |
|
Superseded |
| [U-Boot,01/12] drivers/spi/atmel_spi.c: Fix GCC 4.6 warning |
2011-11-15 |
Anatolij Gustschin |
|
Accepted |
| [U-Boot,01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27 |
2013-05-02 |
Benoît Thébaudeau |
sbabic |
Superseded |
| [U-Boot,01/12] microblaze: board: Remove compilation warning |
2012-07-09 |
Michal Simek |
monstr |
New |
| [U-Boot,01/12] tools/env: Use a board-specific default env |
2012-08-17 |
Joe Hershberger |
trini |
Superseded |
| [U-Boot,01/13] BeagleBoard: config: load kernel from MMC ext, not FAT |
2011-08-16 |
Joel Fernandes |
spaulraj |
Accepted |
| [U-Boot,01/13] Blackfin: BF60x: new processor header files |
2012-08-21 |
Bob Liu |
vapier |
Superseded |
| [U-Boot,01/13] FEC: Abstract out register setup |
2012-05-01 |
Marek Vasut |
marex |
Accepted |
| [U-Boot,01/13] FEC: Abstract out register setup |
2012-05-01 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,01/13] MX5: vision2: use new pmic driver |
2011-10-08 |
Stefano Babic |
|
Accepted |
| [U-Boot,01/13] add XScale sub architecture (IXP/PXA) to board list |
2010-12-28 |
Michael Schwingen |
|
Superseded |
| [U-Boot,01/13] davinci_emac: move arch-independent defines to separate header |
2011-11-11 |
Ilya Yanok |
|
Superseded |
| [U-Boot,01/13] drivers/block/sym53c8xx.c: Fix GCC 4.6 build warning |
2011-11-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings |
2011-12-09 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,01/13] mpc8540eval: Split initdram() into initdram() and sdram_init() |
2010-12-02 |
Becky Bruce |
galak |
Superseded |
| [U-Boot,01/13] mx31: Move EHCI definitions to ehci-fsl.h |
2012-11-05 |
Benoît Thébaudeau |
sbabic |
Changes Requested |
| [U-Boot,01/13] mxc nand: Merge mtd and spl register definitions |
2012-08-13 |
Benoît Thébaudeau |
scottwood |
Accepted |
| [U-Boot,01/13] mxs: Reset the EMI block on mx23 |
2013-02-23 |
Marek Vasut |
sbabic |
Awaiting Upstream |
| [U-Boot,01/13] sh: Remove config.mk for MigoR board |
2011-01-17 |
Nobuhiro Iwamatsu |
|
Accepted |
| [U-Boot,01/13] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,01/13] video: exynos_fb: Remove callbacks from the driver |
2013-02-22 |
Ajay Kumar |
prom |
Accepted |
| [U-Boot,01/14] AT91: Drop AT91_SPIMUX command from cmd_all |
2012-03-31 |
Marek Vasut |
|
Accepted |
| [U-Boot,01/14] IMX: uniform GPIO interface using GPIO framework |
2011-08-21 |
Stefano Babic |
|
Accepted |
| [U-Boot,01/14] alpr board: Fix GCC 4.6 build warnings |
2011-11-30 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only |
2012-01-24 |
Pali Rohár |
trini |
Accepted |
| [U-Boot,01/14] arm: zynq: U-Boot udelay < 1000 FIX |
2013-04-22 |
Michal Simek |
trini |
Changes Requested |
| [U-Boot,01/14] davinci_emac: compilation fix, phy is array now |
2011-11-01 |
Ilya Yanok |
spaulraj |
Accepted |
| [U-Boot,01/14] dm: Initial import of design documents |
2012-08-08 |
Marek Vasut |
|
Accepted |
| [U-Boot,01/14] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,01/14] tegra: spi: rename tegra SPI drivers |
2013-02-13 |
Allen Martin |
tomcwarren |
Superseded |
| [U-Boot,01/15,V2] iMX28: Initial support for iMX28 CPU |
2011-09-27 |
Marek Vasut |
|
Changes Requested |
| [U-Boot,01/15,V3] iMX28: Initial support for iMX28 CPU |
2011-09-30 |
Marek Vasut |
sbabic |
Changes Requested |