Show patches with: Archived = No       |   167300 patches
« 1 2 ... 793 794 795 … 1672 1673 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot] mx51evk: Add CONFIG_REVISION_TAG - - - - --- 2012-09-17 Benoît Thébaudeau sbabic Changes Requested
[U-Boot] mx6: Remove lowlevel_init.S - - - - --- 2012-09-17 Fabio Estevam sbabic Changes Requested
[U-Boot] mx28evk: extend default environment - - - - --- 2012-09-15 Otavio Salvador sbabic Accepted
[U-Boot,v2,2/2] mx6: Add basic support for mx6qsabresd board. - - - - --- 2012-09-13 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,v2,1/2] mx6q: Factor out common DDR3 init code - - - - --- 2012-09-13 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,2/2] mx6: Add basic support for mx6qsabresd board. - - - - --- 2012-09-11 Fabio Estevam sbabic Changes Requested
[U-Boot,1/2] mx6q: Factor out common DDR3 init code - - - - --- 2012-09-11 Fabio Estevam sbabic Changes Requested
[U-Boot] NAND: MXS: include common.h first so cache.h is included in correct order 2 - - - --- 2012-09-10 Tom Warren sbabic Accepted
[U-Boot] mx6qsabrelite:Use IMX_GPIO_NR Macro - - - - --- 2012-09-08 Ashok sbabic Accepted
[U-Boot,NEXT,v1,7/7] MX35: add support for woodburn board - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot,NEXT,v1,6/7] ARM: Add MLO target to arm1136 - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot,NEXT,v1,5/7] SPL: Added MLO for mx35 SOC to SPL Makefile - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot,NEXT,v1,4/7] MX35: Add soc_boot_mode and soc_boot_device to MX35 - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot,NEXT,v1,3/7] MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot,NEXT,v1,1/7] ARM: Fix start.S when used with SPL in arm1136 - - - - --- 2012-09-06 Stefano Babic sbabic Changes Requested
[U-Boot] MX35: mx35pdk: add support for MMC - - - - --- 2012-09-06 Stefano Babic sbabic Awaiting Upstream
[U-Boot,v3] MX: set a common place to share code for Freescale i.MX - - - - --- 2012-09-06 Stefano Babic sbabic Awaiting Upstream
[U-Boot] ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove unused macro CONFIG_DISCOVER_PHY 1 - - - --- 2012-09-05 Ashok sbabic Awaiting Upstream
[U-Boot,v2] MX: set a common place to share code for Freescale i.MX - - 1 - --- 2012-09-05 Stefano Babic sbabic Changes Requested
[U-Boot] MX28: MMC: Avoid DMA DCache race condition - - - - --- 2012-09-01 Marek Vasut sbabic Accepted
[U-Boot,2/2] MX28: SPI: Fix the DMA chaining - - - - --- 2012-09-01 Marek Vasut sbabic Accepted
[U-Boot,1/2] MX28: SPI: Fix the DMA DCache race condition - - - - --- 2012-09-01 Marek Vasut sbabic Accepted
[U-Boot] SCSPS1: Enable caches - - - - --- 2012-08-30 Marek Vasut sbabic Awaiting Upstream
[U-Boot] mx28evk: Add USB Ethernet support - - 1 - --- 2012-08-29 Fabio Estevam sbabic Awaiting Upstream
[U-Boot,2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS 1 - - - --- 2012-08-29 Marek Vasut sbabic Awaiting Upstream
[U-Boot,1/2] MX28: Cleanup mxsboot within make mrproper 1 - - - --- 2012-08-29 Marek Vasut sbabic Awaiting Upstream
[U-Boot,2/2] MX28: Add LRADC dump into SPL debug - - - - --- 2012-08-29 Marek Vasut sbabic Rejected
[U-Boot,1/2] MX28: Add CONFIG_MX28_DEBUG - - - - --- 2012-08-29 Marek Vasut sbabic Rejected
[U-Boot] M28: Fix the use of gpmi-nand in mtdparts 1 - - - --- 2012-08-29 Marek Vasut sbabic Awaiting Upstream
[U-Boot] mx28evk: Convert to mxs_adjust_memory_params() 1 - - - --- 2012-08-28 Fabio Estevam sbabic Awaiting Upstream
[U-Boot] MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR - - - - --- 2012-08-28 Stefano Babic sbabic Accepted
[U-Boot,v2,2/2] MX28: mx28evk: Enable SPI DMA - - - - --- 2012-08-28 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,v2,1/2] MX28: mx28evk: Align SSP clock speed 1 - - - --- 2012-08-28 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,v3] mx5:Use IMX_GPIO_NR macro - - - - --- 2012-08-28 Ashok sbabic Accepted
[U-Boot,v2] mx5:Use IMX_GPIO_NR macro - - - - --- 2012-08-27 Ashok sbabic Changes Requested
[U-Boot,v2] efikamx: update to Efika MX Smarttop and Smartbook boards - - - - --- 2012-08-27 Matt Sealey sbabic Accepted
[U-Boot,2/2] imx27lite: update with gpio api change (v4) 1 - - - --- 2012-08-25 trem sbabic Awaiting Upstream
[U-Boot,1/2] gpio: add gpio api support to mx27 (v4) 1 - - - --- 2012-08-25 trem sbabic Accepted
[U-Boot,2/2] imx27lite: update with gpio api change (v3) - - - - --- 2012-08-24 trem sbabic Changes Requested
[U-Boot,1/2] gpio: add gpio api support to mx27 (v3) - - - - --- 2012-08-24 trem sbabic Changes Requested
[U-Boot,v2] efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-B… - - - - --- 2012-08-24 Matt Sealey sbabic Accepted
[U-Boot] mx5:Use IMX_GPIO_NR macro 1 - - - --- 2012-08-23 Ashok sbabic Changes Requested
[U-Boot] mx6qarm2:Use IMX_GPIO_NR macro 2 - - - --- 2012-08-23 Ashok sbabic Awaiting Upstream
[U-Boot] efikamx: update MAINTAINERS for Genesi Efika MX systems - - - - --- 2012-08-23 Matt Sealey sbabic Awaiting Upstream
[U-Boot,2/2] efikamx: update and clean up configuration - - - - --- 2012-08-23 Matt Sealey sbabic Changes Requested
[U-Boot,1/2] efikamx: refine USB support - - - - --- 2012-08-23 Matt Sealey sbabic Awaiting Upstream
[U-Boot] mxs: Convert timeout parameter to 'unsigned int' 2 - - - --- 2012-08-22 Fabio Estevam sbabic Accepted
[U-Boot,4/4] efikamx: update to Efika MX Smarttop and Smartbook boards 1 - - - --- 2012-08-22 Matt Sealey sbabic Changes Requested
[U-Boot,3/4] efikamx: configure Smarttop PCBID and LED pads in DCD for convenience 1 - - - --- 2012-08-22 Matt Sealey sbabic Accepted
[U-Boot,2/4] efikamx: remove drive strength function and roll its functionality into the DCD 1 - - - --- 2012-08-22 Matt Sealey sbabic Accepted
[U-Boot,v2,1/4] efikamx: move and rename Efika MX directories and config files to prepare for new b… 2 - - - --- 2012-08-22 Matt Sealey sbabic Awaiting Upstream
[U-Boot,v2] mx5: add iomux-mx51.h include 1 - - - --- 2012-08-22 Matt Sealey sbabic Accepted
[U-Boot,2/5] MX28: DMA: Prolong the DMA timeout - - - - --- 2012-08-22 Fabio Estevam sbabic Superseded
[U-Boot,5/5] MX28: m28evk: Enable SPI DMA - - - - --- 2012-08-22 Marek Vasut sbabic Accepted
[U-Boot,4/5] MX28: m28evk: Align SSP clock speed - - - - --- 2012-08-22 Marek Vasut sbabic Accepted
[U-Boot,3/5] MX28: SPI: Supercharge the SPI driver - - - - --- 2012-08-22 Marek Vasut sbabic Accepted
[U-Boot,2/5] MX28: DMA: Prolong the DMA timeout - - - - --- 2012-08-22 Marek Vasut sbabic Accepted
[U-Boot,1/5] MX28: DMA: Align the struct mxs_dma_desc - - - - --- 2012-08-22 Marek Vasut sbabic Accepted
[U-Boot,v2,2/2] mx35 timer: Switch to 32-kHz source 1 - - - --- 2012-08-21 Benoît Thébaudeau sbabic Accepted
[U-Boot,v2,1/2] mx35: Define default SoC input clock frequencies 1 - - - --- 2012-08-21 Benoît Thébaudeau sbabic Accepted
[U-Boot] mx31: Define default SoC input clock frequencies - - - - --- 2012-08-21 Benoît Thébaudeau sbabic Accepted
[U-Boot] mx25: Define default SoC input clock frequencies - - - - --- 2012-08-21 Benoît Thébaudeau sbabic Accepted
[U-Boot,v2,3/3] mx53ard: Use IMX_GPIO_NR macro - - - - --- 2012-08-21 Fabio Estevam sbabic Accepted
[U-Boot,v2,2/3] mx51evk: Use IMX_GPIO_NR macro - - - - --- 2012-08-21 Fabio Estevam sbabic Accepted
[U-Boot,v2,1/3] mx53loco: Use IMX_GPIO_NR macro - - - - --- 2012-08-21 Fabio Estevam sbabic Accepted
[U-Boot,V2,1/1] mx31/mx35/mx51/mx53/mx6: add watchdog - - - - --- 2012-08-20 Troy Kisky sbabic Changes Requested
[U-Boot] mxc: Make gpio_get_value() use PSR 1 - - - --- 2012-08-20 Benoît Thébaudeau sbabic Accepted
[U-Boot,v2,3/3] mx35: Clean up lowlevel_init - - - - --- 2012-08-20 Benoît Thébaudeau sbabic Awaiting Upstream
[U-Boot,v3] mx25: Clean up lowlevel_init - - - - --- 2012-08-20 Benoît Thébaudeau sbabic Awaiting Upstream
[U-Boot,v4] MX: Set a common gpio.h for all i.MX - - - 1 --- 2012-08-20 Stefano Babic sbabic Awaiting Upstream
[U-Boot,3/3] mxs: Rename 'mx28_dram_init' to 'mxs_dram_init' 2 - - - --- 2012-08-19 Otavio Salvador sbabic Accepted
[U-Boot,2/3] mxs: Only build internal Ethernet controller for i.MX28 1 - - - --- 2012-08-19 Otavio Salvador sbabic Accepted
[U-Boot,1/3] mxs: Replace i.MX233 by i.MX23 on copyright header - - - - --- 2012-08-19 Otavio Salvador sbabic Accepted
[U-Boot,v3] MX: Set a common gpio.h for all i.MX - - - - --- 2012-08-19 Stefano Babic sbabic Accepted
[U-Boot,v2] MX: Set a common gpio.h for all i.MX - - - - --- 2012-08-19 Stefano Babic sbabic Changes Requested
[U-Boot,2/2] mxs: Use correct function name to initialize dram 2 - - - --- 2012-08-18 Fabio Estevam sbabic Accepted
[U-Boot,1/2] mx28evk: Remove unneeded 'undef' 2 - - - --- 2012-08-18 Fabio Estevam sbabic Accepted
[U-Boot,v2,2/2] MX28: Move "regs-base.h" include after SoC type configuration 1 - - - --- 2012-08-18 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,v2,1/2] MX28: config: Allow different target generation in elftosb call 1 - - - --- 2012-08-18 Otavio Salvador sbabic Awaiting Upstream
[U-Boot] MX: Set a common gpio.h for all i.MX - - - - --- 2012-08-18 Stefano Babic sbabic Changes Requested
[U-Boot,v2] mx25: Clean up lowlevel_init - - - - --- 2012-08-17 Benoît Thébaudeau sbabic Superseded
[U-Boot,v2,7/7] mx35: Add cpu_mmc_init() 1 - - - --- 2012-08-17 Benoît Thébaudeau sbabic Accepted
[U-Boot,v2] mx5/6: Fix cpu_mmc_init() return value 1 - - - --- 2012-08-17 Benoît Thébaudeau sbabic Accepted
[U-Boot,4/4] efikamx: port USB setup to new iomux model - - - - --- 2012-08-17 Matt Sealey sbabic Changes Requested
[U-Boot,3/4] efikamx: update to Efika MX Smarttop and Smartbook boards - - - - --- 2012-08-17 Matt Sealey sbabic Changes Requested
[U-Boot,2/4] efikamx: remove drive strength hack from early_init_f and move it to the DCD - - - - --- 2012-08-17 Matt Sealey sbabic Changes Requested
[U-Boot,1/4] efikamx: move efikamx into a new directory in preparation for new boards - - - - --- 2012-08-17 Matt Sealey sbabic Changes Requested
[U-Boot] mx5: add iomux-mx51.h include - - - - --- 2012-08-17 Matt Sealey sbabic Changes Requested
[U-Boot,2/2] spi: fix mxs_spi_slave structure allocation to clear memory 1 - - - --- 2012-08-17 Matt Sealey sbabic Accepted
[U-Boot,1/2] spi: fix mxc_spi_slave structure allocation to clear memory 1 - - - --- 2012-08-17 Matt Sealey sbabic Accepted
[U-Boot,1/1] mx51/mx53/mx6: add watchdog - - - - --- 2012-08-15 Troy Kisky sbabic Changes Requested
[U-Boot,V4,3/3] mx53evk: add boot_mode support - - - - --- 2012-08-15 Troy Kisky sbabic Accepted
[U-Boot,V4,2/3] mx6qsabrelite: add boot_mode support - - - - --- 2012-08-15 Troy Kisky sbabic Accepted
[U-Boot,V4,1/3] imx-common/cmd_bmode.c: add imx bmode (bootmode) command 1 - - - --- 2012-08-15 Troy Kisky sbabic Accepted
[U-Boot,1/1] iomux: move IOMUX_GPR13_xxx defines 1 - - - --- 2012-08-15 Troy Kisky sbabic Accepted
[U-Boot,2/2] MX28: Move "regs-base.h" include after SoC type configuration 1 - - - --- 2012-08-15 Otavio Salvador sbabic Accepted
[U-Boot,1/2] MX28: config: Allow different target generation in elftosb call 1 - - - --- 2012-08-15 Otavio Salvador sbabic Changes Requested
[U-Boot,3/3] mxc_spi: apply new mxc_spi version configs to other soc configs - - - - --- 2012-08-15 Terry Lv sbabic Changes Requested
[U-Boot,2/3] mxc_spi: change to use version config instead of soc config in mxc_spi - - - - --- 2012-08-15 Terry Lv sbabic Changes Requested
[U-Boot,1/3] mx53_smd: add spi nor support - - - - --- 2012-08-15 Terry Lv sbabic Changes Requested
« 1 2 ... 793 794 795 … 1672 1673 »