Show patches with: Archived = No       |   167424 patches
« 1 2 ... 194 195 196 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v5,2/3] usb: ohci-at91: Enable OHCI functionality and register into DM [v5,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 - - 1 - --- 2023-07-25 Eugen Hristev ehristev Changes Requested
[v5,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 [v5,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 - - 1 1 --- 2023-07-25 Eugen Hristev ehristev Changes Requested
[v2] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity [v2] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity - - - - --- 2023-07-24 Mihai Sain ehristev Accepted
configs: sama5d2: enable CONFIG_LTO configs: sama5d2: enable CONFIG_LTO - - - 2 --- 2023-07-24 Eugen Hristev ehristev Accepted
[u-boot] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity [u-boot] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity - - - - --- 2023-07-20 Mihai Sain ehristev Changes Requested
[5/5] ARM: dts: at91: sam9x60-curiosity: Add raw NAND flash ARM: dts: at91: Improve sam9x60-curiosity - - - - --- 2023-07-05 Alexander Dahl ehristev Accepted
[4/5] ARM: dts: at91: sam9x60-curiosity: Improve alignment with upstream ARM: dts: at91: Improve sam9x60-curiosity - - - - --- 2023-07-05 Alexander Dahl ehristev Accepted
[3/5] ARM: dts: at91: sam9x60: Change i2c compatible ARM: dts: at91: Improve sam9x60-curiosity - - - - --- 2023-07-05 Alexander Dahl ehristev Accepted
[2/5] ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type ARM: dts: at91: Improve sam9x60-curiosity - - - - --- 2023-07-05 Alexander Dahl ehristev Accepted
[1/5] ARM: dts: at91: sam9x60: Better align with upstream dtsi ARM: dts: at91: Improve sam9x60-curiosity - - - - --- 2023-07-05 Alexander Dahl ehristev Accepted
[v4,3/3] usb: ohci-at91: Add USB PHY functionality [v4,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 - - 1 1 --- 2023-06-22 Eugen Hristev ehristev Superseded
[v4,2/3] usb: ohci-at91: Enable OHCI functionality and register into DM [v4,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 - - 1 - --- 2023-06-22 Eugen Hristev ehristev Superseded
[v4,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 [v4,1/3] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 - - 1 1 --- 2023-06-22 Eugen Hristev ehristev Superseded
board:pm9g45:add missing gpio_request() board:pm9g45:add missing gpio_request() - - - - --- 2023-06-13 Ilko Iliev ehristev Accepted
ARM: at91: armv7: don't initialize clocks if scmi clock driver is enabled ARM: at91: armv7: don't initialize clocks if scmi clock driver is enabled - - - - --- 2023-05-30 Thomas Perrot ehristev Accepted
[v2] atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE. [v2] atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE. - - 1 - --- 2023-05-17 Zixun LI ehristev Accepted
include: Remove unused header files include: Remove unused header files - - - - --- 2023-05-15 Tom Rini ehristev Changes Requested
[v2] atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE. [v2] atmel_sdhci: Force card-detect if MMC_CAP_NONREMOVABLE. - - - - --- 2023-05-15 Zixun LI ehristev Superseded
atmel_sdhci: SDMMC_CD pin still needed for card detection despite EMMC set to non-removable atmel_sdhci: SDMMC_CD pin still needed for card detection despite EMMC set to non-removable - - - - --- 2023-04-27 Zixun Li ehristev Changes Requested
configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO - - - 1 --- 2023-04-27 Stefan Roese ehristev Accepted
[v2,5/5] configs: at91: sam9x60: Add required configs for the USB clock Support the required clocks to enable USB on SAM9X60 - - 1 - --- 2023-03-08 Claudiu Beznea ehristev Accepted
[v2,4/5] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates Support the required clocks to enable USB on SAM9X60 - - 1 - --- 2023-03-08 Claudiu Beznea ehristev Accepted
[v2,3/5] clk: at91: pmc: export clock setup to pmc Support the required clocks to enable USB on SAM9X60 - - - - --- 2023-03-08 Claudiu Beznea ehristev Accepted
[v2,2/5] clk: at91: sam9x60: Register the required clocks for USB Support the required clocks to enable USB on SAM9X60 - - 1 - --- 2023-03-08 Claudiu Beznea ehristev Accepted
[v2,1/5] clk: at91: Add support for sam9x60 USB clock Support the required clocks to enable USB on SAM9X60 - - 1 - --- 2023-03-08 Claudiu Beznea ehristev Accepted
ARM: dts: at91: sama7g5: fix clock id for ebi node ARM: dts: at91: sama7g5: fix clock id for ebi node - 1 2 - --- 2023-02-23 Mihai Sain ehristev Accepted
ARM: dts: at91: sama7g5: fix clock id for ebi node ARM: dts: at91: sama7g5: fix clock id for ebi node - 1 - - --- 2023-02-23 Mihai Sain ehristev Not Applicable
[2/2] configs:pm9g45_deconfig:Modify to use standard ECC layout [1/2] configs:pm9g45_defconfig:Fix boot arguments and boot command - - - - --- 2023-02-20 Ilko Iliev ehristev Accepted
[1/2] configs:pm9g45_defconfig:Fix boot arguments and boot command [1/2] configs:pm9g45_defconfig:Fix boot arguments and boot command - - - - --- 2023-02-20 Ilko Iliev ehristev Accepted
[v3,9/9] ARM: dts: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,8/9] ARM: dts: sama5d2_icp: Add pinctrl nodes for USB related DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,7/9] ARM: dts: sama7g5ek: Add pinctrl, gpio and phy properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,6/9] ARM: dts: sama7g5: Add USB and UTMI DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - 1 - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,5/9] dt-bindings: clk: at91: Define additional UTMI related clocks Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,4/9] dt-bindings: reset: add sama7g5 definitions Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,3/9] ARM: dts: sam9x60ek: Add pinctrl and gpio properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,2/9] ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v3,1/9] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - 1 - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v2,2/2] reset: at91: Add reset driver for basic assert/deassert operations Add basic reset driver for assert/deassert operations - - 1 1 --- 2023-01-04 Sergiu Moga ehristev Accepted
[v2,1/2] ARM: at91: add sama7 SFR definitions Add basic reset driver for assert/deassert operations - - - - --- 2023-01-04 Sergiu Moga ehristev Accepted
[v2,9/9] ARM: dts: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,8/9] ARM: dts: sama5d2_icp: Add pinctrl nodes for USB related DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,7/9] ARM: dts: sama7g5ek: Add pinctrl, gpio and phy properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,6/9] ARM: dts: sama7g5: Add USB and UTMI DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,5/9] dt-bindings: clk: at91: Define additional UTMI related clocks Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,4/9] dt-bindings: reset: add sama7g5 definitions Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,3/9] ARM: dts: sam9x60ek: Add pinctrl and gpio properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,2/9] ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Superseded
[v2,1/9] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2023-01-03 Sergiu Moga ehristev Accepted
[2/2] reset: at91: Add reset driver for basic assert/deassert operations Add basic reset driver for assert/deassert operations - - 1 1 --- 2022-12-23 Sergiu Moga ehristev Accepted
[1/2] ARM: at91: add sama7 SFR definitions Add basic reset driver for assert/deassert operations - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[6/6] ARM: dts: at91: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[5/6] ARM: dts: at91: sama5d2_icp: Add pinctrl nodes for USB related DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[4/6] ARM: dts: at91: sama7: Add USB related DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[3/6] dt-bindings: clk: at91: Define additional UTMI related clocks Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[2/6] dt-bindings: reset: add sama7g5 definitions Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
[1/6] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes Add DT USB definitions for SAM9X60, SAMA5D2 and SAMA7 - - - - --- 2022-12-23 Sergiu Moga ehristev Superseded
ARM: dts: at91: sam9x60: add sdhci1 node and pinctrl ARM: dts: at91: sam9x60: add sdhci1 node and pinctrl - - - - --- 2022-12-23 Mihai Sain ehristev Accepted
configs: sam9x60: add mmc config for sdmmc1 configs: sam9x60: add mmc config for sdmmc1 - - - - --- 2022-12-23 Mihai Sain ehristev Accepted
[[PATCH] board: at91: sam9x60: set blue led on at boot time [[PATCH] board: at91: sam9x60: set blue led on at boot time - - - - --- 2022-12-23 Mihai Sain ehristev Accepted
[v5,19/19] usb: ohci-at91: Add `ohci_t` field in `ohci_at91_priv` Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - 1 - 1 --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,18/19] configs: at91: sama7: Enable USB and RESET functionality Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,17/19] configs: at91: sama5d2: Enable OHCI/EHCI related configs Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,16/19] configs: at91: sam9x60ek: Add required configs for the USB command Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,15/19] ARM: dts: at91: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,14/19] ARM: dts: at91: sama5d2_icp: Add pinctrl nodes for USB related DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,13/19] usb: ohci-at91: Add USB PHY functionality Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,12/19] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,11/19] reset: at91: Add reset driver for basic assert/deassert operations Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - 1 1 --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,10/19] ARM: at91: add sama7 SFR definitions Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,09/19] ARM: dts: at91: sama7: Add USB related DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,08/19] dt-bindings: clk: at91: Define additional UTMI related clocks Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,07/19] dt-bindings: reset: add sama7g5 definitions Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,06/19] usb: ohci-at91: Enable OHCI functionality and register into DM Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,05/19] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards 1 - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,04/19] clk: at91: pmc: export clock setup to pmc Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - 1 - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,03/19] clk: at91: sam9x60: Register the required clocks for USB Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards 1 - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,02/19] clk: at91: Add support for sam9x60 USB clock Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - 1 - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v5,01/19] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-22 Sergiu Moga ehristev Superseded
[v4,19/19] usb: ohci-at91: Add `ohci_t` field in `ohci_at91_priv` Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - 1 - 1 --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,18/19] configs: at91: sama7: Enable USB and RESET functionality Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,17/19] configs: at91: sama5d2: Enable OHCI/EHCI related configs Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,16/19] configs: at91: sam9x60ek: Add required configs for the USB command Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,15/19] ARM: dts: at91: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,14/19] ARM: dts: at91: sama5d2_icp: Add pinctrl nodes for USB related DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,13/19] usb: ohci-at91: Add USB PHY functionality Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,12/19] phy: at91: Add support for the USB 2.0 PHY's of SAMA7 Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,11/19] reset: at91: Add reset driver for basic assert/deassert operations Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - 1 1 --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,10/19] ARM: at91: add sama7 SFR definitions Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,09/19] ARM: dts: at91: sama7: Add USB related DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,08/19] dt-bindings: clk: at91: Define additional UTMI related clocks Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,07/19] dt-bindings: reset: add sama7g5 definitions Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,06/19] usb: ohci-at91: Enable OHCI functionality and register into DM Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,05/19] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,04/19] clk: at91: pmc: export clock setup to pmc Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,03/19] clk: at91: sam9x60: Register the required clocks for USB Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,02/19] clk: at91: Add support for sam9x60 USB clock Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v4,01/19] ARM: dts: sam9x60: Add OHCI and EHCI DT nodes Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - - --- 2022-12-19 Sergiu Moga ehristev Superseded
[v3,19/19] usb: ohci-at91: Add `ohci_t` field in `ohci_at91_priv` Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - 1 - 1 --- 2022-12-12 Sergiu Moga ehristev Superseded
[v3,18/19] configs: at91: sama7: Enable USB and RESET functionality Add USB on SAM9X60, SAMA7G5 and SAMA5D2 boards - - - 1 --- 2022-12-12 Sergiu Moga ehristev Superseded
« 1 2 ... 194 195 196 … 1674 1675 »