| [U-Boot,3/3] ARM: mx6: use common CPU errata config options |
2013-02-26 |
Stephen Warren |
sbabic |
Awaiting Upstream |
| [U-Boot,v3,1/2] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT |
2013-02-26 |
Fabio Estevam |
scottwood |
Accepted |
| [U-Boot,v3,2/2] mtd: nand: mxc_nand: Fix is_16bit_nand() |
2013-02-26 |
Fabio Estevam |
scottwood |
Accepted |
| [U-Boot] nand/fsl_elbc: detect page size at runtime |
2013-02-26 |
Scott Wood |
scottwood |
Accepted |
| [U-Boot,1/2] ARM: tegra: make bounce buffer option |
2013-02-26 |
Stephen Warren |
tomcwarren |
Superseded |
| [U-Boot,2/2] ARM: tegra: make CONFIG_CMD_PART common |
2013-02-26 |
Stephen Warren |
tomcwarren |
Superseded |
| [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
Accepted |
| [U-Boot,1/1] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
Accepted |
| [U-Boot,1/4] EXYNOS5: FDT: Add compatible strings for Serial |
2013-02-27 |
Rajeshwari Shinde |
prom |
Superseded |
| [U-Boot,2/4] EXYNOS5: FDT: Add serial device node values |
2013-02-27 |
Rajeshwari Shinde |
prom |
Superseded |
| [U-Boot,3/4] S5P: Serial: Add fdt support to driver |
2013-02-27 |
Rajeshwari Shinde |
prom |
Superseded |
| [U-Boot,4/4] CONFIG: EXYNOS5: Enable silent console |
2013-02-27 |
Rajeshwari Shinde |
prom |
Superseded |
| [U-Boot,v1,1/6] blackfin: Change the member's type in dma structures. |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,2/6] blackfin: limit the max memory dma peripheral transfer size to 4 bytes. |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,3/6] blackfin: reduce size of u-boot.ldr in bf548-ezkit default config. |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,4/6] Blackfin: adjust asm constraints with NMI workaround |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,5/6] blackfin: add baudrate to bdinfo |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,6/6] blackfin: run core1 from L1 code sram start address in uboot init code on core 0 |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,1/2] blackfin: bf609: implement soft switch |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,2/2] blackfin: bf609: add softswitch config command |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,1/2] blackfin: Set correct early debug serial baudrate. |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,v1,2/2] blackfin: Correct early serial mess output in BYPASS boot mode. |
2013-02-27 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot,1/9] Exynos: Change get_timer() to work correctly |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,2/9] Exynos: Add timer_get_us function |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,3/9] Exynos: pwm: Fix two bugs in the exynos pwm configuration code |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,4/9] Exynos: Avoid a divide by zero by specifying a non-zero period for pwm 4 |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,5/9] Exynos: Tidy up the pwm_config function in the exynos pwm driver |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,6/9] Exynos: Add peripherial id for pwm |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,7/9] Exynos: clock: Add generic api to get the clk freq |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,8/9] Exynos: clock: Correct pwm source clk selection |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,9/9] Exynos: pwm: Use generic api to get pwm clk freq |
2013-02-27 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot] Beagleboard: SPL hangs on serial init |
2013-02-27 |
man.huber@arcor.de |
trini |
Superseded |
| [U-Boot,1/4] Exynos: Add hardware accelerated SHA 256 |
2013-02-27 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,2/4] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-02-27 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,3/4] gen: Add sha256 command |
2013-02-27 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,4/4] Exynos: Flush memory region before starting SHA DMA operation |
2013-02-27 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,v2] Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) |
2013-02-27 |
Tom Warren |
tomcwarren |
Accepted |
| [U-Boot] common/main: move set_working_fdt_addr to enable usage of $fdtaddr |
2013-02-27 |
Barak Wasserstrom |
trini |
Accepted |
| [U-Boot,v2] Allow u-boot to be silent without forcing Linux to be |
2013-02-27 |
Joe Hershberger |
trini |
Accepted |
| [U-Boot] Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to work |
2013-02-27 |
Tom Warren |
tomcwarren |
Accepted |
| [U-Boot] Fix a couple typoes in tools/env/README |
2013-02-27 |
Robert P. J. Day |
trini |
Accepted |
| [U-Boot] mxs: spl_mem_init: Align DDR2 init with FSL bootlets source |
2013-02-27 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v4] mxs: timrot: Add support to i.MX23 |
2013-02-28 |
Fadil Berisha |
sbabic |
Changes Requested |
| [U-Boot,1/4] USB: ohci-at91: support sama5d3x devices |
2013-02-28 |
Bo Shen |
abiessmann |
Superseded |
| [U-Boot,2/4] NET: macb: support sama5d3x devices |
2013-02-28 |
Bo Shen |
abiessmann |
Superseded |
| [U-Boot,3/4] SPI: atmel_spi: support sama5d3x devices |
2013-02-28 |
Bo Shen |
abiessmann |
Superseded |
| [U-Boot,4/4] ARM: atmel: add sama5d3xek support |
2013-02-28 |
Bo Shen |
abiessmann |
Superseded |
| [U-Boot] ARM: sam9x5: fix ethernet pins in MII mode |
2013-02-28 |
Bo Shen |
abiessmann |
Accepted |
| [U-Boot,1/9,v2] Exynos: Change get_timer() to work correctly |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,2/9,v2] Exynos: Add timer_get_us function |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,3/9,v2] Exynos: pwm: Fix two bugs in the exynos pwm configuration code |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,4/9,v2] Exynos: Avoid a divide by zero by specifying a non-zero period for pwm 4 |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,5/9,v2] Exynos: Tidy up the pwm_config function in the exynos pwm driver |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,6/9,v2] Exynos: Add peripherial id for pwm |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,7/9,v2] Exynos: clock: Add generic api to get the clk freq |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,8/9,v2] Exynos: clock: Correct pwm source clk selection |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,9/9,v2] Exynos: pwm: Use generic api to get pwm clk freq |
2013-02-28 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,1/3,v2] Exynos: Add hardware accelerated SHA 256 |
2013-02-28 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,2/3,v2] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-02-28 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,3/3,v2] gen: Add sha256 option to hash command |
2013-02-28 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,1/2,V4] EXYNOS5: Add initial DTS file for Snow. |
2013-02-28 |
Rajeshwari Shinde |
prom |
Accepted |
| [U-Boot,2/2,V4] EXYNOS5: Snow: Add a configuration file |
2013-02-28 |
Rajeshwari Shinde |
prom |
Accepted |
| [U-Boot] dts/Makefile: Build the user specified dts |
2013-02-28 |
Jagannadha Sutradharudu Teki |
|
Superseded |
| [U-Boot] mxs: timrot: Rename local macros |
2013-02-28 |
Fadil Berisha |
sbabic |
Superseded |
| [U-Boot] Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file |
2013-02-28 |
Tom Warren |
tomcwarren |
Accepted |
| [U-Boot,v3,1/4] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters |
2013-02-28 |
Tom Rini |
trini |
Changes Requested |
| [U-Boot,v3,2/4] dfu: NAND specific routines for DFU operation |
2013-02-28 |
Tom Rini |
trini |
Deferred |
| [U-Boot,v3,3/4] am335x_evm: Add CONFIG_CMD_MTDPARTS and relevant defaults |
2013-02-28 |
Tom Rini |
trini |
Deferred |
| [U-Boot,v3,4/4] am335x_evm: Enable DFU for NAND and MMC, provide example alt_info for both |
2013-02-28 |
Tom Rini |
trini |
Deferred |
| [U-Boot,v3] tpm: Add TPM command library |
2013-02-28 |
Che-liang Chiou |
trini |
New |
| [U-Boot,v2] dts/Makefile: Build the user specified dts |
2013-02-28 |
Jagannadha Sutradharudu Teki |
trini |
Accepted |
| [U-Boot] mx6: Provide a structure for accessing HDMI registers |
2013-02-28 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] ARM: tegra: implement WAR for Tegra114 CPU reset vector |
2013-02-28 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,1/2] tools: update checkpatch to latest upstream version |
2013-02-28 |
Kim Phillips |
trini |
Accepted |
| [U-Boot,2/2] tools: enable more checkpatch tests by default |
2013-02-28 |
Kim Phillips |
trini |
Accepted |
| [U-Boot,v2] mxs: spl_mem_init: Align DDR2 init with FSL bootlets source |
2013-02-28 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v2] mx6: Provide a structure for accessing HDMI registers |
2013-03-01 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,V2,1/4] ARM: tegra: make bounce buffer option common |
2013-03-01 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,V2,2/4] disk: define HAVE_BLOCK_DEVICE in a common place |
2013-03-01 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,V2,3/4] disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART |
2013-03-01 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,V2,4/4] ARM: tegra: enable a common set of disk-related commands everywhere |
2013-03-01 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot] cmd_part: don't print cmd name twice in help |
2013-03-01 |
Stephen Warren |
trini |
Accepted |
| [U-Boot,v2,1/9] am33xx: convert defines from am33xx-specific to generic names |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,2/9] am33xx: refactor emif4/ddr to support multiple EMIF instances |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,3/9] am33xx: refactor am33xx clocks and add ti814x support |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,4/9] am33xx: refactor am33xx mux support and add ti814x support |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,5/9] am33xx: add ti814x specific register definitions |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,6/9] am33xx: add dmm support to emif4 library |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,7/9] am33xx: support ti814x mmc reference clock |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,8/9] ns16550: enable quirks for ti814x |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot,v2,9/9] ti814x_evm: add ti814x evm board support |
2013-03-01 |
Matt Porter |
trini |
Superseded |
| [U-Boot] usb: Add new command to set USB 2.0 port test modes |
2013-03-01 |
Julius Werner |
marex |
Awaiting Upstream |
| [U-Boot,RESEND] ARM: cache: declare set_section_dcache |
2013-03-01 |
SRICHARAN R |
aaribaud |
Superseded |
| [U-Boot,v1] kerneldoc: Add Sonic Zhang to alias bfin in git-mailrc. |
2013-03-01 |
Sonic Zhang |
trini |
Accepted |
| [U-Boot,v1] blackfin: Fit u-boot image size into limited nor flash on blackfin. |
2013-03-01 |
Sonic Zhang |
sonicz |
Accepted |
| [U-Boot] arm:trats: change auto-booting to boot kernel with separate device tree blob |
2013-03-01 |
a.wlodarczyk@samsung.com |
prom |
Changes Requested |
| [U-Boot,1/4,V2] EXYNOS5: FDT: Add compatible strings for Serial |
2013-03-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V2] EXYNOS5: FDT: Add serial device node values |
2013-03-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,3/4,V2] S5P: Serial: Add fdt support to driver |
2013-03-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,4/4,V2] CONFIG: EXYNOS5: Enable silent console |
2013-03-01 |
Rajeshwari Shinde |
prom |
Changes Requested |