| [U-Boot,08/14] S3C6400: Delete nand_spl for S3C6400 |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,10/14] S3C64XX: Switch to use read/writel to operation clock system |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,09/14] S3C64XX: Change SROM init to use read/write operation |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot] SMDK6400: Add MAINTAINERS entry |
2012-07-20 |
seedshope |
wd |
Accepted |
| [U-Boot] disk/partition: Fix the depend for all the partitions file |
2012-07-21 |
seedshope |
|
Changes Requested |
| [U-Boot,11/14] S3c64xx: clear GPIO, Interrupt, Watchdog variable. |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,2/4] SMDK6400: Fix some label undefined in build error |
2011-01-11 |
seedshope |
|
Rejected |
| [U-Boot] Add _end for the end of u-boot image for SMDK6400 |
2011-05-01 |
seedshope |
prom |
Accepted |
| [U-Boot,V3,06/15] S3C64xx: mov cpu_init.S to the board directory |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,08/15] S3C6400: Adopt SPL framwork to support spl for nand flash |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,15/15] S3C6400: Remove the unused variable for S3C6400 |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,09/15] arm1176: Fixed No relocation. |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,10/15] S3C64XX: Change SROM init to use read/write operation |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,07/15] S3C6400: Delete nand_spl for S3C6400 |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,02/15] S3C64XX: Switch to use readl/writel to operate nand flash |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,01/15] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V2,3/4] SMDK6400: Fix build error for nand_spl support |
2011-01-11 |
seedshope |
|
Rejected |
| [U-Boot,V3,03/15] S3C64XX: Use readl/writel to operate uart |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3] arm: Fix to mistake clean the memory space |
2012-07-07 |
seedshope |
aaribaud |
Accepted |
| [U-Boot] SMDK6400: Add MAINTAINERS entry |
2012-07-20 |
seedshope |
|
Accepted |
| [U-Boot,V3,04/15] S3C64XX: add pwm for s3c64xx support |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,v5,5/6] SMDK6400: Disable LED function in start.s on the nand booting |
2011-01-22 |
seedshope |
prom |
Accepted |
| [U-Boot,v5,6/6] SMDK6400: Fixup dram_init for relocation support |
2011-01-22 |
seedshope |
prom |
Accepted |
| [U-Boot,v5,4/6] SMDK6400: Add some labels to u-boot.lds to support nand_spl |
2011-01-22 |
seedshope |
prom |
Accepted |
| [U-Boot] armv7: Fix infinite loop for the spl boot |
2012-07-02 |
seedshope |
|
Superseded |
| [U-Boot,13/13] S3C6400: Clear system clock variable |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,V2,01/15] SMDK6400: Move smdk6400 board from Makefile to boards.cfg |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,v5,2/6] SMDK6400: Fix some label undefined in build error |
2011-01-22 |
seedshope |
prom |
Accepted |
| [U-Boot,12/13] S3C6400: clear memory init variable |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,V2,15/15] S3C6400: Remove the unused variable for S3C6400 |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,13/15] S3C6400: clear memory init variable |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,1/3] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undeclared |
2011-01-07 |
seedshope |
aaribaud |
Changes Requested |
| [U-Boot,V2,14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable. |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,08/13] S3C6400: Adopt SPL framwork to support spl for nand flash |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,V2,10/15] S3C64XX: Change SROM init to use read/write operation |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,11/15] S3C64XX: Switch to use read/writel to operation clock system |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,09/15] arm1176: Fixed No relocation. |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,11/13] S3c64xx: clear GPIO, Interrupt, Watchdog flag. |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,V2,03/15] S3C64XX: Use readl/writel to operate uart |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,02/15] S3C64XX: Switch to use readl/writel to operate nand flash |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,06/15] S3C64xx: mov cpu_init.S to the board directory |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V4] arm: Fix to mistake clean the memory space |
2012-07-07 |
seedshope |
aaribaud |
Accepted |
| [U-Boot,V2] arm: Fixed the offset for the no relocation. |
2012-08-01 |
seedshope |
|
Superseded |
| [U-Boot,V2,07/15] S3C6400: Delete nand_spl for S3C6400 |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,12/14] S3C6400: clear memory init variable |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,V2,08/15] S3C6400: Adopt SPL framwork to support spl for nand flash |
2012-07-13 |
seedshope |
prom |
Changes Requested |
| [U-Boot,v5,3/6] SMDK6400: Fix the mutiple link error |
2011-01-22 |
seedshope |
prom |
Accepted |
| [U-Boot,01/13] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot] armv7: Fix to mistake clean the memory space |
2012-07-06 |
seedshope |
aaribaud |
Superseded |
| [U-Boot] armv7: Fix to mistake clean the memory space |
2012-07-05 |
seedshope |
aaribaud |
Superseded |
| [U-Boot] arm/s5pxx: Fix get_timer_masked to get the time. |
2012-07-02 |
seedshope |
prom |
Accepted |
| [U-Boot] smdk6400: Move smdk6400 board from Makefile to boards.cfg |
2012-06-25 |
seedshope |
prom |
Superseded |
| [U-Boot,10/13] S3C64XX: Switch to use read/writel to operation clock system |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,09/13] S3C64XX: Change SROM init to use read/write operation |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,05/13] S3C64XX: reference s5p cpu time system for s3c64xx timer |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,04/13] S3C64XX: add pwm for s3c64xx support |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,06/13] S3C64xx: mov cpu_init.S to the board directory |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,02/13] S3C64XX: Switch to use readl/writel to operate nand flash |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,03/13] S3C64XX: Use readl/writel to operate uart |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,07/13] S3C6400: Delete nand_spl for S3C6400 |
2012-07-07 |
seedshope |
|
Superseded |
| [U-Boot,03/14] S3C64XX: Use readl/writel to operate uart |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,06/14] S3C64xx: mov cpu_init.S to the board directory |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,13/14] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board |
2012-08-15 |
seedshope |
prom |
Changes Requested |
| [U-Boot,v4,3/6] SMDK6400: Fix the mutiple link error |
2011-01-21 |
seedshope |
|
Accepted |
| [U-Boot,v3,2/4] SMDK6400: Fix some label undefined in build error |
2011-01-13 |
seedshope |
|
Rejected |
| [U-Boot,v4,6/6] SMDK6400: Fix SMDK6400 SDRAM init |
2011-01-21 |
seedshope |
|
Rejected |
| [U-Boot,v4,4/6] SMDK6400: Add some labels to u-boot.lds to support nand_spl |
2011-01-21 |
seedshope |
|
Rejected |
| [U-Boot,v4,2/6] SMDK6400: Fix some label undefined in build error |
2011-01-21 |
seedshope |
|
Rejected |
| [U-Boot,v4,1/6] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined |
2011-01-21 |
seedshope |
|
Rejected |
| [U-Boot,v3,3/4] SMDK6400: Fix build error for nand_spl support |
2011-01-13 |
seedshope |
|
Rejected |
| [U-Boot,V2] disk/partition: Fix the depend for all the partitions file |
2012-08-15 |
seedshope |
wd |
Changes Requested |
| [U-Boot,V3,14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,11/15] S3C64XX: Switch to use read/writel to operation clock system |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot,V3,13/15] S3C6400: clear memory init variable |
2012-07-28 |
seedshope |
|
Superseded |
| [U-Boot] Fix the Double defind for setenv |
2011-07-30 |
seedshope |
|
Accepted |
| [U-Boot] armv7: Fix infinite loop for the spl boot |
2012-07-06 |
seedshope |
aaribaud |
Superseded |
| [U-Boot,v3,4/4] SMDK6400: Fix SMDK6400 SDRAM init |
2011-01-13 |
seedshope |
|
Rejected |
| [U-Boot,v3,1/4] SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined |
2011-01-13 |
seedshope |
|
Rejected |
| [U-Boot,V2,4/4] SMDK6400: Fix SMDK6400 SDRAM init |
2011-01-11 |
seedshope |
|
Rejected |
| [U-Boot,v3] arm: Fixed the offset for the no relocation. |
2012-09-02 |
seedshope |
aaribaud |
Accepted |
| [U-Boot,v4,5/6] SMDK6400: Disable LED function in start.s on the nand booting |
2011-01-21 |
seedshope |
|
Accepted |
| [U-Boot] armv7: Fix to mistake clean the memory space |
2012-07-06 |
seedshope |
aaribaud |
Superseded |
| [U-Boot] Driver for AX88183 ethernet chip |
2011-01-27 |
root |
|
Changes Requested |
| [U-Boot] Add support for AX88183 ethernet chip |
2011-01-29 |
root |
|
Superseded |
| [U-Boot] Add support Asix's AX88783 ethernet chip v1.00 |
2011-02-04 |
root |
|
Changes Requested |
| [U-Boot] Add support for ASIX's AX88783 ethernet chip |
2011-01-31 |
root |
|
Superseded |
| [U-Boot] Add support for ASIX's AX88783 ethernet chip |
2011-01-31 |
root |
|
Superseded |
| [U-Boot,v3] powerpc/usb: Fix usb device-tree fix-up |
2013-02-18 |
ramneek mehresh |
marex |
Accepted |
| [U-Boot,v2] powerpc/usb: Fix usb device-tree fix-up |
2013-02-08 |
ramneek mehresh |
|
Superseded |
| [U-Boot] powerpc/usb: Fix usb device-tree fix-up |
2013-02-07 |
ramneek mehresh |
|
Superseded |
| [U-Boot] powerpc/85xx: Make inclusion of USB device fixup conditional |
2011-11-08 |
ramneek mehresh |
|
Accepted |
| [U-Boot] powerpc/85xx: Fix warning for USB device-fixup |
2011-11-08 |
ramneek mehresh |
galak |
Accepted |
| [U-Boot] qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB |
2011-05-10 |
ramneek mehresh |
|
Accepted |
| [U-Boot] qoriq/p1_p2_rdb: USB device-tree fixups for P1020 |
2011-05-10 |
ramneek mehresh |
|
Superseded |
| [U-Boot,v2] qoriq/p1_p2_rdb: USB device-tree fixups for P1020 |
2011-05-12 |
ramneek mehresh |
galak |
Accepted |
| [U-Boot] powerpc/85xx: Make inclusion of USB device fixup conditional |
2011-11-08 |
ramneek mehresh |
galak |
Accepted |