Show patches with: Archived = No       |   167467 patches
« 1 2 ... 675 676 677 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,V2,19/51] imx8m: soc: probe clk before relocation Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,20/51] imx8m: add pin header for i.MX8MM Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,21/51] imx: add i.MX8MM PE property Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,22/51] imx8m: Fix MMU table issue for OPTEE memory Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,23/51] imx8m: set BYPASS ID SWAP to avoid AXI bus errors Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,24/51] imx8m: Configure trustzone region 0 for non-secure access Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,25/51] imx8m: soc: enable SCTR clock before timer init Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,26/51] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,27/51] clk: imx: add Kconfig entry for i.MX8MM Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,28/51] clk: imx: add i.MX8MM clk driver Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,29/51] imx: add i.MX8MM EVK board support Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,30/51] ddr: imx8m: Fix ddr4 driver build issue Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,31/51] imx8mq: Update the ddrc QoS setting for B1 chip Support i.MX8MM/N - - 1 1 --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,32/51] driver: ddr: Refine the ddr init driver on imx8m Support i.MX8MM/N - - 1 - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,33/51] ddr: imx8m: Fix the ddr init hang on imx8mq Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,34/51] imx: add i.MX8MN kconfig entry Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,35/51] imx8mn: support get_cpu_rev Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,36/51] imx8m: add clk support for i.MX8MN Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,37/51] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,38/51] imx: add i.MX8MN PE property Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,39/51] imx8mn: add pin header Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,40/51] imx: spl: use spl_board_boot_device for i.MX8MN Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,41/51] spl: pass args to board_return_to_bootrom Support i.MX8MM/N - - 2 - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,42/51] imx: add rom api support Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,43/51] imx: cpu: restrict get_boot_device Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,44/51] imx8mn: add get_boot_device Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,45/51] tools: imx8mimage: add ROM VERSION Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,46/51] pinctrl: imx8m: support i.MX8MN Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,47/51] tools: imx8m_image: support ddr4 firmware Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,48/51] clk: imx: add i.MX8MN clk support Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,49/51] imx8m: add i.MX8MN ddr4 image cfg file Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,50/51] imx: add dtsi for i.MX8MN Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,V2,51/51] imx: add i.MX8MN DDR4 board support Support i.MX8MM/N - - - - --- 2019-07-08 Peng Fan sbabic Rejected
[U-Boot,1/7] mmc: support hs400 enhanced strobe mode [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,2/7] mmc: Parse HS400 Enhanced strobe DT properties [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - 1 - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,3/7] mmc: Parse no-1-8-v DT property [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - 1 - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,4/7] mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,6/7] mmc: fsl_esdhc_imx: add i.MX8QM compatible [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,7/7] mmc: fsl_esdhc_imx: enlarge mmc timeout [U-Boot,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Superseded
[U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,2/7] mmc: Parse HS400 Enhanced strobe DT properties [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - 1 - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,3/7] mmc: Parse no-1-8-v DT property [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - 1 - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,4/7] mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,6/7] mmc: fsl_esdhc_imx: add i.MX8QM compatible [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot,V2,7/7] mmc: fsl_esdhc_imx: enlarge mmc timeout [U-Boot,V2,1/7] mmc: support hs400 enhanced strobe mode - - - - --- 2019-07-10 Peng Fan freenix Accepted
[U-Boot] Please pull u-boot-mmc [U-Boot] Please pull u-boot-mmc - - - - --- 2019-07-15 Peng Fan trini Accepted
[U-Boot,1/4] imx8: scu_api: add sc_pm_get_resource_power_mode [U-Boot,1/4] imx8: scu_api: add sc_pm_get_resource_power_mode - - - - --- 2019-07-16 Peng Fan sbabic Superseded
[U-Boot,2/4] imx: scu_api: add sc_pm_cpu_start [U-Boot,1/4] imx8: scu_api: add sc_pm_get_resource_power_mode - - - - --- 2019-07-16 Peng Fan sbabic Superseded
[U-Boot,3/4] imx: Kconfig: make bootaux available for i.MX8M [U-Boot,1/4] imx8: scu_api: add sc_pm_get_resource_power_mode - - - - --- 2019-07-16 Peng Fan sbabic Superseded
[U-Boot,4/4] imx8: add bootaux support [U-Boot,1/4] imx8: scu_api: add sc_pm_get_resource_power_mode - - - - --- 2019-07-16 Peng Fan sbabic Superseded
[U-Boot,1/5] arm: dts: sync dts for i.MX6UL [U-Boot,1/5] arm: dts: sync dts for i.MX6UL - - - - --- 2019-07-17 Peng Fan sbabic Superseded
[U-Boot,2/5] arm: dts: sync dts for i.MX6ULL [U-Boot,1/5] arm: dts: sync dts for i.MX6UL - - - - --- 2019-07-17 Peng Fan sbabic Superseded
[U-Boot,3/5] arm: dts: import dts for i.MX6ULZ [U-Boot,1/5] arm: dts: sync dts for i.MX6UL - - - - --- 2019-07-17 Peng Fan sbabic Superseded
[U-Boot,4/5] imx: add i.MX6ULZ cpu type [U-Boot,1/5] arm: dts: sync dts for i.MX6UL - - - - --- 2019-07-17 Peng Fan sbabic Superseded
[U-Boot,5/5] imx: add i.MX6ULZ board [U-Boot,1/5] arm: dts: sync dts for i.MX6UL - - - - --- 2019-07-17 Peng Fan sbabic Superseded
[U-Boot,1/4] imx: add module fuse support [U-Boot,1/4] imx: add module fuse support - - - - --- 2019-07-19 Peng Fan sbabic Superseded
[U-Boot,2/4] i2c: mxc: add fuse check [U-Boot,1/4] imx: add module fuse support - - - - --- 2019-07-19 Peng Fan sbabic Superseded
[U-Boot,3/4] usb: mx6: add fuse check [U-Boot,1/4] imx: add module fuse support - - - - --- 2019-07-19 Peng Fan sbabic Superseded
[U-Boot,4/4] net: fec: add fuse check [U-Boot,1/4] imx: add module fuse support - - - - --- 2019-07-19 Peng Fan sbabic Superseded
[U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - 1 --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,02/14] i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb boot [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,03/14] i.MX7ULP: Fix system reset after a7 rtc alarm expired. [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,04/14] i.MX7ULP: Correct the clock index [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,05/14] i.MX7ULP: Fix PCC register bits mask and offset issue [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,06/14] i.MX7ULP: Add CONFIG_MX7ULP to kconfig [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,07/14] i.MX7ULP: Fix wrong i2c configuration name [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,08/14] misc: Kconfig: make i.MX7ULP could use MXC_OCOTP [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,09/14] i.MX7ULP: evk: Enable fuse comamnd [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,10/14] i.MX7ULP: Fix SPLL/APLL clock rate calculation issue [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,11/14] i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,12/14] i.MX7ULP: Add CPU revision check for B0 [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,13/14] i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device - - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,RESEND,14/14] i.MX7ULP: Change clock rate calculation for NIC1 BUS and EXT [U-Boot,RESEND,01/14] imx: i.MX7ULP: add get_boot_device 1 - - - --- 2019-07-22 Peng Fan sbabic Accepted
[U-Boot,V3,1/5] imx8: support parsing i.MX8 Container file add i.MX8 container loading support - - - - --- 2019-07-22 Peng Fan sbabic Superseded
[U-Boot,V3,2/5] spl: mmc: support loading i.MX container format file add i.MX8 container loading support - - - - --- 2019-07-22 Peng Fan sbabic Superseded
[U-Boot,V3,3/5] imx: add container target add i.MX8 container loading support - - - - --- 2019-07-22 Peng Fan sbabic Superseded
[U-Boot,V3,4/5] imx8qxp_mek: switch to use container image add i.MX8 container loading support - - - - --- 2019-07-22 Peng Fan sbabic Superseded
[U-Boot,V3,5/5] imx8qm_mek: switch to use container image add i.MX8 container loading support - - - - --- 2019-07-22 Peng Fan sbabic Superseded
[U-Boot,01/16] clk: introduce clk_dev_binded [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,02/16] clk: use clk_dev_binded [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,03/16] clk: mux: add set parent support [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,04/16] clk: export mux/divider ops [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,05/16] clk: add clk-gate support [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,06/16] clk: divider set rate supporrt [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,07/16] clk: fixed_rate: export clk_fixed_rate [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,08/16] clk: imx: import clk heplers [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,09/16] clk: imx: gate2 add set rate [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,10/16] dm: clk: ignore default settings when node not valid [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,11/16] clk: add composite clk support [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,12/16] clk-provider: include clk-uclass.h [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,13/16] clk: gate: support sandbox [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,14/16] clk: sandbox: add composite clk [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,15/16] test: dm: clk_ccf: test composite clk [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,16/16] configs: sandbox: Enable composite clk [U-Boot,01/16] clk: introduce clk_dev_binded - - - - --- 2019-07-23 Peng Fan lukma Superseded
[U-Boot,V2,1/4] imx: add module fuse support [U-Boot,V2,1/4] imx: add module fuse support - - - - --- 2019-07-23 Peng Fan sbabic Superseded
[U-Boot,V2,2/4] i2c: mxc: add fuse check [U-Boot,V2,1/4] imx: add module fuse support - - - - --- 2019-07-23 Peng Fan sbabic Superseded
[U-Boot,V2,3/4] usb: mx6: add fuse check [U-Boot,V2,1/4] imx: add module fuse support - - - - --- 2019-07-23 Peng Fan sbabic Superseded
[U-Boot,V2,4/4] net: fec: add fuse check [U-Boot,V2,1/4] imx: add module fuse support 1 - - - --- 2019-07-23 Peng Fan sbabic Superseded
« 1 2 ... 675 676 677 … 1674 1675 »