Show patches with: Archived = No       |   167482 patches
« 1 2 ... 660 661 662 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v2,2/3] pmic:pfuze implement regulator mode set - - - - --- 2015-01-15 Peng Fan bobenstein Superseded
[U-Boot,v2,3/3] imx:mx6 set normal APS and standby PFM mode - - - - --- 2015-01-15 Peng Fan bobenstein Superseded
[U-Boot,v3,1/3] pmic:pfuz100 add switch mode and more registers - - - - --- 2015-01-16 Peng Fan bobenstein Superseded
[U-Boot,v3,2/3] pmic:pfuze implement pmic_mode_init - - - - --- 2015-01-16 Peng Fan bobenstein Superseded
[U-Boot,v3,3/3] imx:mx6 set normal APS and standby PFM mode - - - - --- 2015-01-16 Peng Fan bobenstein Superseded
[U-Boot,RFC] dm:spi:fsl_qspi add DM support - - - - --- 2015-01-17 Peng Fan sjg RFC
[U-Boot] dm:gpio:mxc get configuration from dtb - - - - --- 2015-01-19 Peng Fan sjg Changes Requested
[U-Boot,v2] dm:gpio:mxc add DT support - - - - --- 2015-01-20 Peng Fan sjg Changes Requested
[U-Boot,v3,1/4] dm: introduce dev_get_addr interface 1 - - - --- 2015-01-21 Peng Fan sjg Changes Requested
[U-Boot,v3,2/4] dm: add dev_get_addr prototype 1 - - - --- 2015-01-21 Peng Fan sjg Changes Requested
[U-Boot,v3,3/4] dm:gpio:mxc add a bank_index entry in platdata 1 - - - --- 2015-01-21 Peng Fan sjg Changes Requested
[U-Boot,v3,4/4] dm:gpio:mxc add DT support - - - - --- 2015-01-21 Peng Fan sjg Changes Requested
[U-Boot,v5,1/3] pmic:pfuz100 add switch mode and more registers 1 - 1 - --- 2015-01-27 Peng Fan sbabic Awaiting Upstream
[U-Boot,v5,2/3] pmic:pfuze implement pmic_mode_init 1 - - - --- 2015-01-27 Peng Fan sbabic Awaiting Upstream
[U-Boot,v5,3/3] imx:mx6 set normal APS and standby PFM mode 1 - - - --- 2015-01-27 Peng Fan sbabic Awaiting Upstream
[U-Boot] ARM: armv7 fix spelling of SCTRL - - - - --- 2015-01-29 Peng Fan trini Accepted
[U-Boot] ARM: HYP/non-sec: relocation before enable secondary cores 1 - - - --- 2015-02-04 Peng Fan aaribaud Accepted
[U-Boot,v4,1/3] dm: introduce dev_get_addr interface 2 - - - --- 2015-02-10 Peng Fan sjg Accepted
[U-Boot,v4,2/3] dm:gpio:mxc add a bank_index entry in platdata 2 - - - --- 2015-02-10 Peng Fan sjg Accepted
[U-Boot,v4,3/3] dm:gpio:mxc add DT support 2 - - - --- 2015-02-10 Peng Fan sjg Accepted
[U-Boot] ARM: imx6 Add WDOG3 for i.MX6SX - - - - --- 2015-02-11 Peng Fan Changes Requested
[U-Boot,v2,1/3] imx:mx6sl add I2C pad settings - - - - --- 2015-02-11 Peng Fan sbabic Changes Requested
[U-Boot,v2,2/3] imx:mx6slevk add pmic and i2c configuration - - - - --- 2015-02-11 Peng Fan sbabic Changes Requested
[U-Boot,v2,3/3] imx:mx6slevk implement power init board - - - - --- 2015-02-11 Peng Fan sbabic Changes Requested
[U-Boot,v3,1/3] imx:mx6sl add I2c pad settings - - - - --- 2015-02-12 Peng Fan sbabic Accepted
[U-Boot,v3,2/3] imx:mx6slevk add pmic and i2c configuration - - - - --- 2015-02-12 Peng Fan sbabic Accepted
[U-Boot,v3,3/3] imx:mx6slevk implement power init board - - - - --- 2015-02-12 Peng Fan sbabic Accepted
[U-Boot] imx:mx6 remove duplicated includes - - - - --- 2015-03-04 Peng Fan sbabic Awaiting Upstream
[U-Boot,1/2] imx:mx6dlsabresd fix error detecting thermal - - - - --- 2015-03-10 Peng Fan sbabic Awaiting Upstream
[U-Boot,2/2] imx:mx6slevk support reading temperature - - - - --- 2015-03-10 Peng Fan sbabic Awaiting Upstream
[U-Boot] mmc: fsl_esdhc fix register offset - - - 1 --- 2015-03-10 Peng Fan trini Accepted
[U-Boot] imx: mx6sx fix pad property macro definition - - - - --- 2015-03-15 Peng Fan sbabic Superseded
[U-Boot] mmc: fix OCR Polling - - - - --- 2015-03-19 Peng Fan panto Superseded
[U-Boot,4/6] mmc: Continue polling MMC card for OCR only if it is still not ready - - - - --- 2015-03-20 Peng Fan panto Superseded
[U-Boot] mtd: spi: check return value of spi_setup_slave - - - - --- 2015-03-20 Peng Fan jagan Accepted
[U-Boot,dm/next,v1] dm: qspi fix claim bus and release bus - - - - --- 2015-04-14 Peng Fan sjg Superseded
[U-Boot] dm: i2c: mxc support DM - - - - --- 2015-04-15 Peng Fan hs Superseded
[U-Boot,V2] i2c: mxc: refactor i2c driver and support dm - - - - --- 2015-04-25 Peng Fan Changes Requested
[U-Boot,V3] i2c: mxc: refactor i2c driver and support dm 2 - - - --- 2015-04-27 Peng Fan sjg Superseded
[U-Boot,V4,1/2] i2c: mxc: refactor i2c driver and support dm 1 - - - --- 2015-05-14 Peng Fan sjg Superseded
[U-Boot,V4,2/2] imx: mx27 remove redundant macro - - - - --- 2015-05-14 Peng Fan sjg Superseded
[U-Boot,V5,1/2] i2c: mxc: refactor i2c driver and support dm 1 - - - --- 2015-05-14 Peng Fan sjg Accepted
[U-Boot,V5,2/2] imx: mx27 move GPIO_PORTx to gpio.h - - - - --- 2015-05-14 Peng Fan sjg Accepted
[U-Boot] imx: mx6sx enable SION for i2c pin mux - - - - --- 2015-05-18 Peng Fan sbabic Awaiting Upstream
[U-Boot] pmic: pfuze100 fix typo - - - - --- 2015-05-18 Peng Fan sbabic Awaiting Upstream
[U-Boot] imx: dma: correct MXS_DMA_ALIGNMENT 1 - - - --- 2015-05-20 Peng Fan sbabic Awaiting Upstream
[U-Boot,1/8] imx: mx6 cast return type of is_soc_rev to int - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,2/8] imx: mx6: Add MX6DQP CPU rev type - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,3/8] imx: mx6: L2cache: Enable the double line fill for i.MX6DQP - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,4/8] imx: mx6: ccm: Change the clock settings for i.MX6QP - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,5/8] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,6/8] imx: mx6qp: Enable PRG clock for IPU - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,7/8] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,8/8] imx: mx6qp: Adjust AQos settings for peripherals - - - - --- 2015-06-10 Peng Fan Changes Requested
[U-Boot,v2,1/8] imx: mx6 correct is_soc_rev usage - - - - --- 2015-06-11 Peng Fan sbabic Awaiting Upstream
[U-Boot,v2,2/8] imx: mx6 correct get_cpu_rev - - - - --- 2015-06-11 Peng Fan sbabic Awaiting Upstream
[U-Boot,v2,3/8] imx: mx6 introuduce macro is_mx6dqp - - - - --- 2015-06-11 Peng Fan sbabic Awaiting Upstream
[U-Boot,v2,4/8] imx: mx6: ccm: Change the clock settings for i.MX6QP - - - - --- 2015-06-11 Peng Fan sbabic Changes Requested
[U-Boot,v2,5/8] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP - - - - --- 2015-06-11 Peng Fan sbabic Superseded
[U-Boot,v2,6/8] imx: mx6qp Enable PRG clock and AQoS setting for IPU - - - - --- 2015-06-11 Peng Fan sbabic Changes Requested
[U-Boot,v2,7/8] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support - - - - --- 2015-06-11 Peng Fan sbabic Changes Requested
[U-Boot,v2,8/8] imx: mx6qp: Adjust AQos settings for peripherals - - - - --- 2015-06-11 Peng Fan sbabic Changes Requested
[U-Boot] imx: imximage: add new CHECK/CLR BIT command - - - - --- 2015-06-14 Peng Fan sbabic Changes Requested
[U-Boot,1/3] imx: mx6 remove duplicated enable_cspi_clock - - - - --- 2015-06-24 Peng Fan sbabic Changes Requested
[U-Boot,2/3] imx: cm_fx6 use enable_spi_clk - - - - --- 2015-06-24 Peng Fan sbabic Changes Requested
[U-Boot,3/3] imx: mx6 add i2c4 clock support for i.MX6SX - - - - --- 2015-06-24 Peng Fan sbabic Changes Requested
[U-Boot,V2,1/2] imx: mx6 remove duplicated enable_cspi_clock 1 - - - --- 2015-06-25 Peng Fan sbabic Changes Requested
[U-Boot,V2,2/2] imx: mx6 add i2c4 clock support for i.MX6SX - - - - --- 2015-06-25 Peng Fan sbabic Changes Requested
[U-Boot] mmc:fsl_esdhc invalidate dcache before read - - 1 - --- 2015-06-25 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,1/6] imx: add dummpy cpu type MXC_CPU_MX6QP/DP - - - - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V3,2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP - - 1 - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V3,3/6] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP - - - - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V3,4/6] imx: mx6qp Enable PRG clock for IPU - - 1 - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V3,5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file - - 1 - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V3,6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support - - 1 - --- 2015-06-29 Peng Fan Superseded
[U-Boot,V4,1/6] imx: add dummpy cpu type MXC_CPU_MX6QP/DP 1 - - - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V4,2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP 1 - 1 - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V4,3/6] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP 1 - - - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V4,4/6] imx: mx6qp Enable PRG clock for IPU 1 - 1 - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V4,5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file 1 - 1 - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V4,6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support - - 1 - --- 2015-06-30 Peng Fan sbabic Superseded
[U-Boot,V2,1/2] imx: mx6 remove duplicated enable_cspi_clock 1 - - - --- 2015-07-01 Peng Fan sbabic Awaiting Upstream
[U-Boot,V2,2/2] imx: mx6 add i2c4 clock support for i.MX6SX - - - - --- 2015-07-01 Peng Fan sbabic Awaiting Upstream
[U-Boot,01/11] imx: mx6ul: Add i.MX6UL CPU type 1 - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,02/11] imx: mx6ul: Add pins IOMUX head file - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,03/11] imx: mx6ul: Update imx registers head file - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,04/11] imx-common: add syscounter driver - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,05/11] imx: mx6ul remove errata for i.MX6UL and use syscounter - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,06/11] imx:mx6ul add clock support - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,07/11] imx: mx6ul update soc related settings - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,08/11] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,09/11] mxc: gpio add i.MX6UL support - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,10/11] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,11/11] imx: mx6ul_14x14_evk add basic board support - - - - --- 2015-07-02 Peng Fan sbabic Changes Requested
[U-Boot,V5,1/6] imx: add cpu type for i.MX6QP/DP 1 - - - --- 2015-07-11 Peng Fan Awaiting Upstream
[U-Boot,V5,2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP 1 - 1 - --- 2015-07-11 Peng Fan Awaiting Upstream
[U-Boot,V5,3/6] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP 1 - - - --- 2015-07-11 Peng Fan Awaiting Upstream
[U-Boot,V5,4/6] imx: mx6qp Enable PRG clock for IPU 1 - 1 - --- 2015-07-11 Peng Fan Awaiting Upstream
[U-Boot,V5,5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file 1 - 1 - --- 2015-07-11 Peng Fan Awaiting Upstream
[U-Boot,V5,6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support - - 1 - --- 2015-07-11 Peng Fan Awaiting Upstream
« 1 2 ... 660 661 662 … 1674 1675 »