| [U-Boot,v2] pm9g45_v1.3: make ethernet works |
2011-02-17 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot] pm9g45: init serial console before relocation |
2011-09-15 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot,AT91,rework,1/1] make pm9263 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot] pm9263: init serial console before relocation |
2011-09-13 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot] ARM: define CONFIG_MACH_TYPE for all ronetix boards |
2011-10-31 |
Asen Dimov |
aaribaud |
Accepted |
| [U-Boot] pm9261: init serial console before relocation |
2011-09-15 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot,1/1] pm9261: enable cache command |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/1] pm9261: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,AT91,rework,0/1] change common at91sam9g45 files |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,0/1] at91: USART3_BASE use AT91_DBGU_BASE instead of (AT91_BASE_SYS + AT91_DBGU) |
2010-12-12 |
Asen Dimov |
reinhardm |
Rejected |
| [U-Boot,AT91,rework,2/2] make pm9261 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,AT91,rework,0/2] A dummy() implementation _just_ to build drivers/mtd/cfi_flash.c and drivers/block/mg_disk.c drivers. |
2011-06-09 |
Asen Dimov |
reinhardm |
Rejected |
| [U-Boot,AT91,rework,1/2] change common at91sam9261 files after AT91 rework |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,0/1] pm9g45: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,AT91,rework,v2] change common at91sam9261 files after AT91 rework |
2011-07-18 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,1/1] atmel_dataflash: fix calling to reset_timer() and get_timer() |
2010-12-12 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,AT91,rework,1/1] make pm9g45 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot,AT91,rework,0/1] change common at91sam9263 files after AT91 rework |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,v2] pm9261: init serial console before relocation |
2011-12-09 |
Asen Dimov |
ag |
Accepted |
| [U-Boot,0/1] pm9263: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot] Updated code to print OMAP4 cpu info. |
2011-03-15 |
Asad Akbar |
spaulraj |
Changes Requested |
| [U-Boot] OMAP3: add definition of CTRL_WKUP_CTRL register |
2012-08-27 |
Arnout Vandecappelle |
trini |
Accepted |
| [U-Boot,V2,3/5] designware_i2c: Fixed the setting of the i2c bus speed |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,V2,4/5] designware_i2c.h: Fixed the correct values for SCL low/high time |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,V2,5/5] designware_i2c.h: Define IC_CLK only if not already defined in config file |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,2/3] designware_i2c: Added s/w generation of stop bit |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,V2,1/5] designware_i2c.c: Added the support for MULTI_BUS |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,3/3] designware_i2c: Fixed the setting of the i2c bus speed |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,V2,2/5] designware_i2c: Added s/w generation of stop bit |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,1/3] designware_i2c.c: Added the support for MULTI_BUS |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,v2,7/7] part_efi: dcache: allocate cacheline aligned buffers |
2011-10-04 |
Anton staaf |
|
Changes Requested |
| [U-Boot,4/5] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,01/11] arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v3,4/4] Tegra2: mmc: Factor out mmc_wait_inhibit functionality |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,v3,1/6] cache: add ALLOC_CACHE_ALIGN_BUFFER macro |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,1/4] Tegra2: mmc: define register field values in tegra2_mmc.h |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,v3,3/6] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,2/5] cache: add default setting for CONFIG_SYS_CACHELINE_SIZE |
2011-10-03 |
Anton staaf |
|
Rejected |
| [U-Boot,12/12] cache: include asm/cache.h for ARCH_DMA_MINALIGN definition |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,4/7] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,03/12] nios2: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,1/7] cache: add ALLOC_CACHE_ALIGN_BUFFER macro |
2011-10-04 |
Anton staaf |
|
Superseded |
| [U-Boot,10/12] mips: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,06/11] sparc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,5/5] ext2: Cache line aligned partial sector bounce buffer |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,2/2] ext2: Simplify partial sector access logic |
2011-06-13 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,08/11] microblaze: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v3,4/6] ext2: Cache line aligned partial sector bounce buffer |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,02/11] m68k: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v2,5/7] ext2: Cache line aligned partial sector bounce buffer |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,01/12] arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,06/12] sparc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-08-23 |
Anton staaf |
|
Rejected |
| [U-Boot,v2] ext2: Cache line aligned partial sector bounce buffer |
2011-08-22 |
Anton staaf |
|
Changes Requested |
| [U-Boot,v2,6/7] mmc: dcache: allocate cache aligned buffers for ext_csd |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,2/4] Tegra2: mmc: Support DMA restarts at buffer boundaries |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,02/12] m68k: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,2/6] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,09/11] mips: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,3/5] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,1/5] cache: add ALLOC_CACHE_ALIGN_BUFFER macro |
2011-10-03 |
Anton staaf |
|
Changes Requested |
| [U-Boot,1/1] mmc: S5P: Support DMA restarts at buffer boundaries |
2011-06-30 |
Anton staaf |
prom |
Accepted |
| [U-Boot,v2,03/11] nios2: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot] arm: Tegra2: Fix out of tree builds |
2011-04-05 |
Anton staaf |
|
Superseded |
| [U-Boot,11/12] x86: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,1/2] ext2: Fix checkpatch violations |
2011-06-13 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,07/11] avr32: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,07/12] avr32: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
reinhardm |
Accepted |
| [U-Boot,v2,1/2] ext2: Fix checkpatch violations |
2011-06-30 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,04/11] powerpc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v3,6/6] part_efi: dcache: allocate cacheline aligned buffers |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot] common: fix behavior of ROUND macro when input is already rounded |
2011-09-02 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,2/2] ext2: Simplify partial sector access logic |
2011-06-30 |
Anton staaf |
|
Accepted |
| [U-Boot] sandbox: Add asm/cache.h for sandbox |
2011-10-25 |
Anton staaf |
wd |
Accepted |
| [U-Boot,v2,05/11] sh: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,04/12] powerpc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,11/11] cache: include asm/cache.h for ARCH_DMA_MINALIGN definition |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,09/12] microblaze: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,05/12] sh: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot] ext2: Cache line aligned partial sector bounce buffer |
2011-08-22 |
Anton staaf |
|
Superseded |
| [U-Boot,v2,10/11] x86: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v3,3/4] Tegra2: mmc: Add data transfer completion timeout |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,08/12] blackfin: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Superseded |
| [U-Boot,v2,3/7] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,2/7] cache: add default setting for CONFIG_SYS_CACHELINE_SIZE |
2011-10-04 |
Anton staaf |
|
Changes Requested |
| [U-Boot,v3,5/6] mmc: dcache: allocate cache aligned buffers for ext_csd |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot] mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice |
2009-09-02 |
Anton Vorontsov |
kimphill |
Accepted |
| [U-Boot] problem with USB storage STALL status |
2013-03-04 |
Anton Vasilyev |
marex |
Not Applicable |
| [U-Boot,v2] ORIGEN : use absolute paths and fix tool naming |
2011-09-12 |
Angus Ainslie |
prom |
Accepted |
| [U-Boot] ORIGEN : enable device tree support |
2011-09-09 |
Angus Ainslie |
prom |
Accepted |
| [U-Boot] ORIGEN : use absolute paths for tools directory |
2011-09-09 |
Angus Ainslie |
prom |
Changes Requested |
| [U-Boot,1/1] m68k/lib: fix serial driver relocation |
2012-11-23 |
Angelo Dureghello |
trini |
Accepted |
| [U-Boot,v6,2/2] board: add support for amcore board |
2013-01-26 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,v3,2/2] amcore: add support for amcore board |
2012-11-04 |
Angelo Dureghello |
jasonjin |
Changes Requested |
| [U-Boot,v5,2/2] board: add support for amcore board |
2013-01-25 |
Angelo Dureghello |
jasonjin |
Superseded |
| [U-Boot,v3,1/2] m68k: add support for mcf5307 cpu |
2012-11-04 |
Angelo Dureghello |
jasonjin |
Changes Requested |
| [U-Boot,v4,2/2] board: add support for amcore board |
2013-01-23 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,1/1] mtd/cfi: add support for SST 4KB sector granularity |
2012-12-01 |
Angelo Dureghello |
stroese |
Awaiting Upstream |
| [U-Boot,v4,1/2] m68k: add support for mcf5307 cpu |
2013-01-22 |
Angelo Dureghello |
jasonjin |
New |
| [U-Boot,v2,02/22] omap4: add OMAP4430 revision check |
2011-05-15 |
Aneesh V |
|
Superseded |