| [U-Boot,V4] mpc83xx:fix pcie configuration space read/write |
2011-01-19 |
Baidu Boy |
kimphill |
Superseded |
| [U-Boot] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit |
2013-05-15 |
Axel Lin |
tomcwarren |
Superseded |
| [U-Boot,RFT] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build |
2013-05-16 |
Axel Lin |
tomcwarren |
New |
| [U-Boot] configs:Remove unused macro CONFIG_DISCOVER_PHY |
2012-11-07 |
Ashok |
trini |
Accepted |
| [U-Boot] omap2424:Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 as CONFIG_DRIVER_LAN91C96 is obsolete. |
2012-10-15 |
Ashok |
trini |
Accepted |
| [U-Boot] mx35pdk:Use IMX_GPIO_NR macro |
2012-11-07 |
Ashok |
sbabic |
Awaiting Upstream |
| [U-Boot,v1] ARM : Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96 |
2012-10-15 |
Ashok |
trini |
Accepted |
| [U-Boot] Remove duplication of CONFIG_BOOTCOUNT_LIMIT |
2013-01-13 |
Ashok |
wd |
Rejected |
| [U-Boot] imx: Remove unused Macro CONFIG_DISCOVER_PHY |
2012-07-03 |
Ashok |
|
Superseded |
| [U-Boot] ARM: arm1176: Define arch_cpu_init() for s3c64xx |
2012-09-26 |
Ashok |
prom |
Accepted |
| [U-Boot] mx53loco: use print_cpuinfo() defined in imx-common |
2012-06-23 |
Ashok |
|
Rejected |
| [U-Boot] mx6qarm2:Use IMX_GPIO_NR macro |
2012-08-23 |
Ashok |
sbabic |
Awaiting Upstream |
| [U-Boot] ARM: Remove unused CONFIG_DRIVER_SMC91111, CONFIG_DRIVER_LAN91C96 |
2012-10-15 |
Ashok |
trini |
Superseded |
| [U-Boot] mx5:Use IMX_GPIO_NR macro |
2012-08-23 |
Ashok |
sbabic |
Changes Requested |
| [U-Boot] README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 |
2012-10-15 |
Ashok |
trini |
Accepted |
| [U-Boot] mx6qsabrelite:Use IMX_GPIO_NR Macro |
2012-09-08 |
Ashok |
sbabic |
Accepted |
| [U-Boot] mx6: Make pad name macro consistent with the datasheet |
2012-06-15 |
Ashok |
|
Accepted |
| [U-Boot,v2] mx5:Use IMX_GPIO_NR macro |
2012-08-27 |
Ashok |
sbabic |
Changes Requested |
| [U-Boot] ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove unused macro CONFIG_DISCOVER_PHY |
2012-09-05 |
Ashok |
sbabic |
Awaiting Upstream |
| [U-Boot,v3] mx5:Use IMX_GPIO_NR macro |
2012-08-28 |
Ashok |
sbabic |
Accepted |
| [U-Boot] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V |
2011-09-28 |
Ash Charles |
ag |
Accepted |
| [U-Boot,AT91,rework,0/1] change common at91sam9263 files after AT91 rework |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,v2] pm9g45_v1.3: make ethernet works |
2011-02-17 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot,v2] pm9g45: init serial console before relocation |
2011-12-09 |
Asen Dimov |
ag |
Accepted |
| [U-Boot] pm9263: save environment at the NOR Flash end |
2011-09-12 |
Asen Dimov |
reinhardm |
Changes Requested |
| [U-Boot] pm9261: add mach-type localy for the board |
2011-10-28 |
Asen Dimov |
aaribaud |
Rejected |
| [U-Boot,AT91,rework] pm9261: compiles with the AT91 reworked scheme |
2011-07-26 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot] pm9g45: add mach-type localy for the board |
2011-10-28 |
Asen Dimov |
aaribaud |
Rejected |
| [U-Boot,AT91,rework,0/1] change common at91sam9g45 files |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot] pm9g45_v1.3: make ethernet works |
2011-01-27 |
Asen Dimov |
reinhardm |
Changes Requested |
| [U-Boot] pm9263: add mach-type localy for the board |
2011-10-28 |
Asen Dimov |
aaribaud |
Rejected |
| [U-Boot] pm9g45: init serial console before relocation |
2011-09-15 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot,v2] pm9263: init serial console before relocation |
2011-12-09 |
Asen Dimov |
ag |
Accepted |
| [U-Boot] pm9263: init serial console before relocation |
2011-09-13 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot,AT91,rework,1/1] make pm9g45 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot] pm9261: init serial console before relocation |
2011-09-15 |
Asen Dimov |
ag |
Changes Requested |
| [U-Boot,AT91,rework,1/1] make pm9263 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Accepted |
| [U-Boot,0/1] at91: USART3_BASE use AT91_DBGU_BASE instead of (AT91_BASE_SYS + AT91_DBGU) |
2010-12-12 |
Asen Dimov |
reinhardm |
Rejected |
| [U-Boot,v2] pm9261: init serial console before relocation |
2011-12-09 |
Asen Dimov |
ag |
Accepted |
| [U-Boot,1/1] pm9263: enable cache command |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,AT91,rework,v2] change common at91sam9261 files after AT91 rework |
2011-07-18 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,0/1] pm9261: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/1] pm9263: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,1/1] atmel_dataflash: fix calling to reset_timer() and get_timer() |
2010-12-12 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,1/1] pm9261: enable cache command |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,0/1] pm9g45: ARM relocation support |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,1/1] pm9g45: enable cache command |
2010-12-12 |
Asen Dimov |
|
Accepted |
| [U-Boot,AT91,rework,0/2] A dummy() implementation _just_ to build drivers/mtd/cfi_flash.c and drivers/block/mg_disk.c drivers. |
2011-06-09 |
Asen Dimov |
reinhardm |
Rejected |
| [U-Boot,AT91,rework,1/2] change common at91sam9261 files after AT91 rework |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot,AT91,rework,2/2] make pm9261 buildable for v2011.06 release |
2011-06-09 |
Asen Dimov |
reinhardm |
Superseded |
| [U-Boot] ARM: define CONFIG_MACH_TYPE for all ronetix boards |
2011-10-31 |
Asen Dimov |
aaribaud |
Accepted |
| [U-Boot] Updated code to print OMAP4 cpu info. |
2011-03-15 |
Asad Akbar |
spaulraj |
Changes Requested |
| [U-Boot] OMAP3: add definition of CTRL_WKUP_CTRL register |
2012-08-27 |
Arnout Vandecappelle |
trini |
Accepted |
| [U-Boot,V2,1/5] designware_i2c.c: Added the support for MULTI_BUS |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,2/3] designware_i2c: Added s/w generation of stop bit |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,V2,5/5] designware_i2c.h: Define IC_CLK only if not already defined in config file |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,V2,4/5] designware_i2c.h: Fixed the correct values for SCL low/high time |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,V2,3/5] designware_i2c: Fixed the setting of the i2c bus speed |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,3/3] designware_i2c: Fixed the setting of the i2c bus speed |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,V2,2/5] designware_i2c: Added s/w generation of stop bit |
2012-12-06 |
Armando Visconti |
hs |
Accepted |
| [U-Boot,1/3] designware_i2c.c: Added the support for MULTI_BUS |
2012-12-05 |
Armando Visconti |
hs |
Superseded |
| [U-Boot,v2,08/11] microblaze: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot] common: fix behavior of ROUND macro when input is already rounded |
2011-09-02 |
Anton staaf |
|
Accepted |
| [U-Boot,01/12] arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,2/5] cache: add default setting for CONFIG_SYS_CACHELINE_SIZE |
2011-10-03 |
Anton staaf |
|
Rejected |
| [U-Boot] sandbox: Add asm/cache.h for sandbox |
2011-10-25 |
Anton staaf |
wd |
Accepted |
| [U-Boot,4/5] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,03/12] nios2: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,4/4] Tegra2: mmc: Factor out mmc_wait_inhibit functionality |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,10/12] mips: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,1/4] Tegra2: mmc: define register field values in tegra2_mmc.h |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,v2,02/11] m68k: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v2,4/7] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,07/11] avr32: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v2,1/7] cache: add ALLOC_CACHE_ALIGN_BUFFER macro |
2011-10-04 |
Anton staaf |
|
Superseded |
| [U-Boot,v2,01/11] arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot] ext2: Cache line aligned partial sector bounce buffer |
2011-08-22 |
Anton staaf |
|
Superseded |
| [U-Boot,v2,7/7] part_efi: dcache: allocate cacheline aligned buffers |
2011-10-04 |
Anton staaf |
|
Changes Requested |
| [U-Boot,v3,5/6] mmc: dcache: allocate cache aligned buffers for ext_csd |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,05/12] sh: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,2/6] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,08/12] blackfin: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-12 |
Anton staaf |
|
Superseded |
| [U-Boot,2/2] ext2: Simplify partial sector access logic |
2011-06-13 |
Anton staaf |
|
Accepted |
| [U-Boot] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-08-23 |
Anton staaf |
|
Rejected |
| [U-Boot,1/2] ext2: Fix checkpatch violations |
2011-06-13 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,11/11] cache: include asm/cache.h for ARCH_DMA_MINALIGN definition |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v2,04/11] powerpc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |
| [U-Boot,v3,3/6] mmc: dcache: allocate cache aligned buffer for scr and switch_status |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot] arm: Tegra2: Fix out of tree builds |
2011-04-05 |
Anton staaf |
|
Superseded |
| [U-Boot,v2,1/2] ext2: Fix checkpatch violations |
2011-06-30 |
Anton staaf |
|
Accepted |
| [U-Boot,v3,3/4] Tegra2: mmc: Add data transfer completion timeout |
2011-11-10 |
Anton staaf |
afleming |
Accepted |
| [U-Boot,5/5] ext2: Cache line aligned partial sector bounce buffer |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,3/5] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-03 |
Anton staaf |
|
Accepted |
| [U-Boot,12/12] cache: include asm/cache.h for ARCH_DMA_MINALIGN definition |
2011-10-12 |
Anton staaf |
|
Accepted |
| [U-Boot,v2] ext2: Cache line aligned partial sector bounce buffer |
2011-08-22 |
Anton staaf |
|
Changes Requested |
| [U-Boot,v2,6/7] mmc: dcache: allocate cache aligned buffers for ext_csd |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,5/7] ext2: Cache line aligned partial sector bounce buffer |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,1/5] cache: add ALLOC_CACHE_ALIGN_BUFFER macro |
2011-10-03 |
Anton staaf |
|
Changes Requested |
| [U-Boot,v2,3/7] tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra |
2011-10-04 |
Anton staaf |
|
Accepted |
| [U-Boot,v2,05/11] sh: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment |
2011-10-17 |
Anton staaf |
|
Not Applicable |