| [U-Boot,v2] imx: fix coding style |
2011-10-13 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v4,4/6] pmic: Add support for mc34704 |
2012-10-23 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v3,1/2] MX25: tx25: Avoid the usage of extern in C file |
2011-09-02 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v2] MX31: Disable watchdog during low-power modes |
2011-09-21 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] MX25: tx25: Pass NAND_U_BOOT option |
2011-09-13 |
Fabio Estevam |
sbabic |
Rejected |
| [U-Boot] mx53loco: Add support for SEIKO 4.3'' WVGA panel |
2012-10-23 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v4] mx31ads: Use the new relocation scheme |
2011-06-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,2/2] mx25: timer.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] sdhc_boot: Make mmc_get_env_addr dependant on CONFIG_FSL_ESDHC |
2011-11-28 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v2] mx51evk: Update environment in order to allow booting a dt kernel |
2013-04-19 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v5,2/4] MX5: Add iomux structure |
2011-05-23 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] mx31: timer.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v5,2/3] MX25: tx25: Avoid the usage of extern in C file |
2011-09-05 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,3/3] mx25pdk: Add FEC support |
2012-10-11 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,2/2] mx53smd: Configure two banks of DDR |
2011-05-19 |
Fabio Estevam |
|
Superseded |
| [U-Boot,3/3] mx27: reset.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,3/5] mx53evk: Configure the pins as GPIOs prior to using gpio_get_value |
2011-11-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,7/9] mxc_i2c: Allow MX6Q I2C3 to work |
2012-05-31 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v5,3/4] MX5: Introduce a function for setting the chip select size |
2011-05-23 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v2,3/3] mx28evk: Add initial support for MX28EVK board |
2011-12-15 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v2,1/2] MX25: tx25: Avoid the usage of extern in C file |
2011-08-30 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,v2] mx6: Add workaround for ARM errata |
2013-01-05 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v3,2/3] MX31: Introduce get_reset_cause() |
2011-04-15 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,2/3] mx27: timer.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,2/5] mx53ard: Configure the pins as GPIOs prior to using gpio_get_value |
2011-11-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/3] mx25pdk: Add esdhc support |
2012-10-11 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,1/2] mx53smd: Fix build issue due to BOARD_LATE_INIT |
2011-05-19 |
Fabio Estevam |
|
Superseded |
| [U-Boot] mx25: reset.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] mx53: ddr3: Update DD3 initialization |
2011-08-19 |
Fabio Estevam |
|
Accepted |
| [U-Boot] mx6q: Add basic support for mx6qsabreauto |
2012-09-21 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v4,1/4] MX5: Make the weim structure complete |
2011-05-19 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,1/2] mx25: generic.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] configs: Remove CONFIG_NET_MULTI from board files |
2012-01-11 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v5,2/2] mx51evk: Do not force the rootfs type |
2013-04-19 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v4,4/4] MX53: Add initial support for MX53ARD |
2011-05-19 |
Fabio Estevam |
|
Accepted |
| [U-Boot,1/3] mx27: generic.c: Fix Codyng Style |
2011-10-02 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,3/4] mx31: Use proper IO accessor for GPR register |
2011-11-09 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v2,4/5] pmic: Add support for mc34704 |
2012-10-15 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,5/5] mx51evk: Configure the pins as GPIOs prior to using gpio_get_value |
2011-11-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,3/6] mx53ard: Remove unused get_board_rev function |
2011-10-27 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,5/13] mx31pdk: Place machine ID into board config |
2011-09-22 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,1/3] mx5: lowlevel_init.S: Split init_clock macro |
2012-10-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,4/5] mx53smd: Configure the pins as GPIOs prior to using gpio_get_value |
2011-11-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/6] mx53evk: Remove unused get_board_rev function |
2011-10-27 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] zmx25: Fix build warning by defining CONFIG_DISPLAY_CPUINFO |
2011-09-23 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v2] mx6: Remove lowlevel_init.S |
2012-09-29 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,5/6] mx53loco: Remove unused get_board_rev function |
2011-10-27 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] mx6dl: Add initial support for Wandboard dual lite |
2013-03-09 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v2,1/6] mx53evk: Remove unneeded '1' from mx53evk.h |
2011-10-27 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] mx6qsabreauto: Pass the board revision to the kernel |
2012-10-02 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,6/6] vision2: Remove unused get_board_rev function |
2011-10-27 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v3,1/6] mx25pdk: Include CONFIG_MX25 |
2012-10-23 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v2,1/2] mx25: generic.c: Fix coding style |
2011-10-05 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot] mx6qsabreauto: Add Ethernet support |
2012-09-25 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v3,2/3] mx28: Let dram_init be common for mx28 |
2011-12-15 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] mx6: Remove lowlevel_init.S |
2012-09-17 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v3,3/3] mx28evk: Add initial support for MX28EVK board |
2011-12-15 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] doc: README.mx28_common: Add missing entry into Contents |
2012-06-18 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,3/13] mx31ads: Remove dram_init_banksize() |
2011-09-22 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v2,2/5] mx25pdk: Add esdhc support |
2012-10-15 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot] qong: remove unneeded "1" from qong.h |
2011-10-21 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v2,5/5] mx25pdk: Add Ethernet support |
2012-10-15 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v2,2/2] mx51evk: Add RTC support |
2011-10-24 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v3] Add initial support for Wandboard dual lite and solo. |
2013-03-13 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,1/2] rtc: Make mc13783-rtc driver generic |
2011-10-24 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot,v2,3/5] pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH |
2012-10-15 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,v2,1/2] rtc: Make mc13783-rtc driver generic |
2011-10-24 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] tools: Add cleanpatch |
2012-09-28 |
Fabio Estevam |
trini |
Superseded |
| [U-Boot] mx31pdk: Add MC13783 PMIC support |
2011-10-24 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,2/5] MX28: DMA: Prolong the DMA timeout |
2012-08-22 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot,2/13] mx25pdk: Remove dram_init_banksize() |
2011-09-22 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,2/2] mmc: mxsmmc: Fix operation with DMA |
2012-04-02 |
Fabio Estevam |
|
Superseded |
| [U-Boot,4/6] mx53smd: Remove unused get_board_rev function |
2011-10-27 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v2,2/2] mx6q: Add basic support for mx6qsabreauto |
2012-09-24 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] mx51evk: Remove unused get_board_rev function |
2011-10-26 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] mx6qsabresd: Add 8-bit USDHC support |
2012-09-18 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,1/6] mx53evk: Remove unneeded '1' from mx51evk.h |
2011-10-27 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,3/3] configs: mx53evk: Remove CONFIG_HAS_ETH1 |
2012-10-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,1/3] configs: mx53loco: Remove CONFIG_HAS_ETH1 |
2012-10-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,1/3] mx5: Define a common get_board_rev() |
2013-04-25 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards |
2012-04-30 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,RFC] mx6qsabresd: Add Ethernet support |
2012-09-18 |
Fabio Estevam |
|
Changes Requested |
| [U-Boot] mx6qsabresd: Add Ethernet support |
2012-09-19 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/3] configs: mx51evk: Remove CONFIG_HAS_ETH1 |
2012-10-15 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] mx35pdk: README: Remove NAND references |
2012-09-14 |
Fabio Estevam |
|
Accepted |
| [U-Boot,1/2] mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER |
2012-10-17 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/2] vision2: do not overwrite the console |
2012-08-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,1/2] mx51evk: do not overwrite the console |
2012-08-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,2/2] apx4devkit: Turn on caches |
2012-08-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,1/2] m28evk: Turn on caches |
2012-08-05 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] mx53loco: Define CONFIG_BOARD_LATE_INIT |
2012-07-31 |
Fabio Estevam |
|
Awaiting Upstream |
| [U-Boot] mxs: Convert timeout parameter to 'unsigned int' |
2012-08-22 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot] mx6: Provide a structure for accessing HDMI registers |
2013-02-28 |
Fabio Estevam |
sbabic |
Superseded |
| [U-Boot] mx6qsabrelite: README: No need to pass 'u-boot.imx' |
2013-03-20 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot] nitrogen6x: Setup CCM_CCOSR register |
2013-04-17 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,01/10] mx53loco: Remove unused SOBJS |
2012-05-29 |
Fabio Estevam |
sbabic |
Accepted |
| [U-Boot,v2] mx6: Provide a structure for accessing HDMI registers |
2013-03-01 |
Fabio Estevam |
sbabic |
Changes Requested |
| [U-Boot,1/9] mx6: Allow mx6 to access the IPUv3 registers |
2012-05-31 |
Fabio Estevam |
ag |
Accepted |
| [U-Boot,3/3] mx53ard: Move register masks into imx-regs.h |
2013-04-25 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,v2,1/2] mx6q: Factor out common DDR3 init code |
2012-09-13 |
Fabio Estevam |
sbabic |
Awaiting Upstream |