| [U-Boot,2/4] Add parameter to sha1sum to save the SHA1 sum |
2012-08-17 |
Joe Hershberger |
trini |
Accepted |
| [U-Boot,2/4] Add SDIO/MMC support for kirkwood SoC |
2012-09-21 |
DrEagle |
|
Superseded |
| [U-Boot,2/4] Add Atmel USBA UDC |
2011-02-12 |
Marcel Janssen |
rbohmer |
Changes Requested |
| [U-Boot,2/4] ARMV7: OMAP3: Remove unused variable boot_flash_env_addr |
2011-03-22 |
Luca Ceresoli |
spaulraj |
Superseded |
| [U-Boot,2/4] ARMV7: OMAP3: Cleanup extern variables in mem.c |
2011-04-15 |
Luca Ceresoli |
|
Superseded |
| [U-Boot,2/4] ARM: vexpress: create A5 specific board config |
2013-04-08 |
Andre Przywara |
aaribaud |
Superseded |
| [U-Boot,2/4] ARM: tegra: combine duplicate Makefile rules |
2012-10-16 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,2/4] ARM: don't relocate if we are already too high |
2011-04-18 |
Alessandro Rubini |
aaribaud |
Rejected |
| [U-Boot,2/4] ARM: at91sam9x5: enable USB OHCI support for 9x5ek board. |
2012-11-27 |
Richard Genoud |
|
Superseded |
| [U-Boot,2/4] ARM: OMAP5: dmm: Create a tiler trap section. |
2012-05-17 |
SRICHARAN R |
trini |
Accepted |
| [U-Boot,2/4] ARM: OMAP4/5: Move USB clocks to essential group. |
2012-06-13 |
SRICHARAN R |
trini |
Accepted |
| [U-Boot,2/4,v8] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-03-21 |
Akshay Saraswat |
prom |
Accepted |
| [U-Boot,2/4,v7] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-03-18 |
Akshay Saraswat |
prom |
Superseded |
| [U-Boot,2/4,v6] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-03-15 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,2/4,v5] Introducing 8-bit wide register, mx28_register_8 |
2012-02-15 |
Robert@domain.unknown, Delien@domain.unknown, robert@delien.nl |
|
Changes Requested |
| [U-Boot,2/4,v5] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-03-06 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,2/4,v4] Introducing 8-bit wide register, mx28_register_8 |
2012-02-07 |
Robert Deliën |
|
Accepted |
| [U-Boot,2/4,v3] spi: add spi_set_speed func |
2011-01-19 |
Thomas Chou |
|
Accepted |
| [U-Boot,2/4,v3] net: Add driver for Zynq Gem IP |
2012-09-14 |
Michal Simek |
jhersh |
Accepted |
| [U-Boot,2/4,v3] nand_util: convert nand_write_skip_bad() to flags |
2011-05-24 |
Ben Gardiner |
|
Accepted |
| [U-Boot,2/4,v3] i.MX28: Fix ref_cpu clock setup |
2012-02-06 |
Robert Deliën |
|
Changes Requested |
| [U-Boot,2/4,v3] Exynos: config: Enable ACE HW for SHA 256 for Exynos |
2013-03-01 |
Akshay Saraswat |
prom |
Changes Requested |
| [U-Boot,2/4,v2] spi: add spi_set_speed func |
2010-12-24 |
Thomas Chou |
afleming |
Accepted |
| [U-Boot,2/4,v2] sf: unify write funcs |
2011-04-25 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot,2/4,v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger |
2012-04-25 |
Prabhakar Kushwaha |
afleming |
Superseded |
| [U-Boot,2/4,v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger |
2012-03-21 |
Prabhakar Kushwaha |
afleming |
Accepted |
| [U-Boot,2/4,v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger |
2012-03-26 |
Prabhakar Kushwaha |
afleming |
Superseded |
| [U-Boot,2/4,v2] powerpc/85xx: Add more P1021 defines |
2011-02-07 |
Haiying Wang |
galak |
Superseded |
| [U-Boot,2/4,v2] net: Add driver for Zynq Gem IP |
2012-08-16 |
Michal Simek |
aaribaud |
Superseded |
| [U-Boot,2/4,v2] nand_util: convert nand_write_skip_bad() to flags |
2011-05-19 |
Ben Gardiner |
|
Superseded |
| [U-Boot,2/4,v2] cfi_flash: Read PPB sector protection from device for AMD/Spansion chips |
2012-12-06 |
Stefan Roese |
stroese |
Awaiting Upstream |
| [U-Boot,2/4,v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,V4] EXYNOS5: FDT: Add serial device node values |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,V3] kerneldoc: Add nicer CSS stylesheet for HTML docs |
2012-10-07 |
Marek Vasut |
trini |
Accepted |
| [U-Boot,2/4,V3] EXYNOS5: FDT: Add serial device node values |
2013-03-15 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V3] EXYNOS5: Add gpio pin numbering feature |
2013-02-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V2] serial: Add Tegra2 serial port support |
2011-01-14 |
Tom Warren |
|
Superseded |
| [U-Boot,2/4,V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c |
2013-01-07 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V2] PXA: Rework start.S to be closer to other ARMs |
2011-11-01 |
Marek Vasut |
marex |
Accepted |
| [U-Boot,2/4,V2] MX5: Add AHB clock reporting and fix IPG clock reporting |
2011-09-22 |
Marek Vasut |
sbabic |
Accepted |
| [U-Boot,2/4,V2] EXYNOS5: FDT: Add serial device node values |
2013-03-01 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,V2] EXYNOS5 : FDT: Add Aliases for SPI device |
2012-12-05 |
Rajeshwari Shinde |
prom |
Changes Requested |
| [U-Boot,2/4,RESEND] M28: Scan only first 512 MB of DRAM to avoid memory wraparound |
2012-05-03 |
Marek Vasut |
|
Awaiting Upstream |
| [U-Boot,2/3] x86: Rename include/asm/ic to include/asm/arch-sc520 |
2011-08-28 |
Graeme Russ |
|
Accepted |
| [U-Boot,2/3] wandboard: Add support for carrier board MicroSD card |
2013-04-15 |
Otavio Salvador |
sbabic |
Superseded |
| [U-Boot,2/3] wandboard: Add support for carrier board MicroSD card |
2013-04-15 |
Otavio Salvador |
sbabic |
Superseded |
| [U-Boot,2/3] versatile: use boards.confg |
2011-04-17 |
Alessandro Rubini |
|
Superseded |
| [U-Boot,2/3] ventana: define CONFIG_MACH_VENTANA |
2012-03-01 |
Troy Kisky |
|
Rejected |
| [U-Boot,2/3] usb: workaround non-working keyboards. |
2013-05-11 |
Simon Glass |
marex |
New |
| [U-Boot,2/3] usb: fix: Fixing Port status and feature number constants |
2013-04-24 |
Vivek Gautam |
marex |
Accepted |
| [U-Boot,2/3] usb/gadget: add the fastboot gadget |
2011-09-16 |
Sebastian Siewior |
|
Changes Requested |
| [U-Boot,2/3] tx25: fix linker file for newer ld support |
2010-11-01 |
Albert ARIBAUD |
|
Superseded |
| [U-Boot,2/3] tx25: Use generic gpio_* calls |
2012-06-10 |
Vikram Narayanan |
|
Superseded |
| [U-Boot,2/3] tt01: add video support |
2012-01-30 |
Helmut Raiger |
sbabic |
Changes Requested |
| [U-Boot,2/3] tegra: medcom: Add device tree support |
2012-05-24 |
Thierry Reding |
|
Superseded |
| [U-Boot,2/3] tegra: enable bootz command |
2012-06-13 |
Stephen Warren |
|
Accepted |
| [U-Boot,2/3] tegra: add pin_mux_spi() board initialization function |
2012-06-12 |
Stephen Warren |
|
Accepted |
| [U-Boot,2/3] tegra: add ULPI on USB2 funcmux entry |
2012-05-29 |
Lucas Stach |
|
Accepted |
| [U-Boot,2/3] tegra: add LCD into default TEGRA_DEVICE_SETTINGS |
2012-11-28 |
Stephen Warren |
tomcwarren |
Accepted |
| [U-Boot,2/3] tegra: Enable LCD on Medcom-Wide |
2012-11-23 |
Thierry Reding |
tomcwarren |
Accepted |
| [U-Boot,2/3] tegra2: Fix default RAM size selection in odmdata |
2012-01-06 |
Stephen Warren |
|
Accepted |
| [U-Boot,2/3] tegra20: add clock_set_pllout function |
2012-08-19 |
Lucas Stach |
|
Superseded |
| [U-Boot,2/3] spi/kirkwood: support spi_claim/release_bus functions |
2012-05-16 |
Valentin Longchamp |
|
Superseded |
| [U-Boot,2/3] sntp: avoid use of uninitialized variable |
2011-05-13 |
Chris Packham |
|
Accepted |
| [U-Boot,2/3] sntp: avoid use of uninitialized variable |
2011-05-13 |
Chris Packham |
|
Accepted |
| [U-Boot,2/3] smsc95xx: in smsc95xx_set_multicast write to reg |
2011-11-11 |
Wolfgang Grandegger |
|
Changes Requested |
| [U-Boot,2/3] sf: stmicro: Add support for N25Q32A |
2013-01-29 |
Michal Simek |
trini |
Accepted |
| [U-Boot,2/3] serial: drop serial_register return value |
2011-06-28 |
Mike Frysinger |
wd |
Superseded |
| [U-Boot,2/3] serial: drop serial_register return value |
2011-04-30 |
Mike Frysinger |
wd |
Accepted |
| [U-Boot,2/3] serial: add LPC32X0 high-speed UART devices support |
2012-01-11 |
Vladimir Zapolskiy |
|
Superseded |
| [U-Boot,2/3] sandbox: allow processing before main loop |
2012-02-26 |
Mike Frysinger |
vapier |
Accepted |
| [U-Boot,2/3] qong: Use mx31_set_gpr to setup USBH2 pins |
2011-10-21 |
Fabio Estevam |
sbabic |
Awaiting Upstream |
| [U-Boot,2/3] pxa25x: Add UDC registers definitions |
2012-08-17 |
Łukasz Dałek |
|
Superseded |
| [U-Boot,2/3] ppc4xx: remove invalid access to PCI_BRDGOPT2 register |
2011-10-13 |
Matthias Fuchs |
stroese |
Accepted |
| [U-Boot,2/3] powerpc/p5020: Add various p5020 specific information |
2011-01-13 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/p2041: fixup portal config info |
2011-10-12 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/mpc8xxx: Move DDR RCW overriding to common code |
2011-08-24 |
York Sun |
galak |
Accepted |
| [U-Boot,2/3] powerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose |
2011-08-24 |
chenhui zhao |
galak |
Accepted |
| [U-Boot,2/3] powerpc/mpc83xx: add support for new SPL |
2012-12-06 |
Scott Wood |
kimphill |
Accepted |
| [U-Boot,2/3] powerpc/85xx: relocate CCSR before creating the initial RAM area |
2011-08-05 |
Timur Tabi |
galak |
Accepted |
| [U-Boot,2/3] powerpc/85xx: Update device tree handling for SRIO |
2011-10-14 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/85xx: Enable eSPI support for p1_p2_rdb |
2011-04-21 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/85xx: Disable ECC in considering performance on MPC8572DS |
2011-03-07 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/85xx: Add support for P2041[e] XAUI in SERDES |
2011-07-21 |
Kumar Gala |
galak |
Accepted |
| [U-Boot,2/3] powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards |
2011-09-02 |
Ruchika Gupta |
galak |
Accepted |
| [U-Boot,2/3] post/lib_powerpc/multi.c: code cleanup |
2011-12-23 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,2/3] phylib: wait for TN2020 to achieve SERDES lane alignment at startup |
2011-10-05 |
Timur Tabi |
|
Superseded |
| [U-Boot,2/3] omapimage: Add support for byteswapped SPI images |
2012-10-16 |
Tom Rini |
trini |
Accepted |
| [U-Boot,2/3] omap: gpio: generic changes after changing API |
2011-09-05 |
Sanjeev Premi |
|
Accepted |
| [U-Boot,2/3] omap: emif: deal with rams that return duplicate mr data on all byte lanes |
2012-05-30 |
Steve Sakoman |
trini |
Accepted |
| [U-Boot,2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h |
2013-04-08 |
Tom Rini |
trini |
Accepted |
| [U-Boot,2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h |
2013-04-05 |
Tom Rini |
trini |
Accepted |
| [U-Boot,2/3] omap4: make SDRAM init work for ES1.0 silicon |
2011-08-09 |
Aneesh V |
|
Superseded |
| [U-Boot,2/3] omap4: do not enable fs-usb module |
2012-04-25 |
Tero Kristo |
trini |
Accepted |
| [U-Boot,2/3] omap4: add support for EHCI |
2011-05-09 |
Gilles Chanteperdrix |
|
Changes Requested |
| [U-Boot,2/3] omap3evm: Update ethernet reset sequence for Rev.G board |
2011-06-22 |
Sanjeev Premi |
trini |
Changes Requested |
| [U-Boot,2/3] omap3: mvblx: select fpgafilename according to orientation |
2013-02-08 |
Michael Jones |
trini |
Accepted |
| [U-Boot,2/3] omap3: mem: Clean-up whitespaces |
2011-10-27 |
Sanjeev Premi |
spaulraj |
Accepted |
| [U-Boot,2/3] ns16550 has a different register layout on SOC_DA8XX |
2012-03-06 |
Mikhail Kshevetskiy |
|
Superseded |
