| [U-Boot,3/6] omap1510inn: fix build breaks |
2011-06-07 |
Aneesh V |
|
Superseded |
| [U-Boot,3/3] omap3evm: eth: Include functions only when necessary |
2011-06-22 |
Sanjeev Premi |
|
Accepted |
| [U-Boot,v2,3/7] powerpc/km82xx: rename mgcoge files to km82xx |
2011-05-03 |
Holger Brunck |
|
Accepted |
| [U-Boot] arch/powerpc/lib/board.c: fix build warning |
2011-10-23 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] Pull request: nand flash |
2012-01-26 |
Scott Wood |
|
Accepted |
| [U-Boot,6/6] omap730p2: fix build breaks |
2011-06-07 |
Aneesh V |
|
Superseded |
| [U-Boot,1/2] net/eth.c: make eth_get_dev_by_name(NULL) safe |
2011-07-04 |
Helmut Raiger |
|
Superseded |
| [U-Boot] RFC [PATCH 1/5] drivers/rtc: add Marvell Integrated RTC. |
2011-07-26 |
u-boot@lakedaemon.net |
|
Superseded |
| [U-Boot] drivers/rtc: add Marvell Integrated RTC. |
2011-08-01 |
u-boot@lakedaemon.net |
|
Superseded |
| [U-Boot] utx8245: fix build breakage due to assert() |
2011-09-10 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] CM4000: fix broken flash base for OpenGear boards |
2011-09-09 |
Greg Ungerer |
|
Accepted |
| [U-Boot,4/6] YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings |
2011-09-08 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] da8xxevm: Fix warning: unused variable 'val' |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i' |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] cfb_console: fix build breakage |
2011-07-29 |
Andreas Bießmann |
|
Accepted |
| [U-Boot,v3] arm, davinci_emac: fix driver bug if more then 3 PHYs are detected |
2011-11-09 |
Heiko Schocher |
|
Superseded |
| [U-Boot,4/6] omap1610inn: fix build breaks |
2011-06-09 |
Aneesh V |
|
Superseded |
| [U-Boot] PPC4xx: ALPR: constify FPGA code |
2011-09-05 |
Wolfgang Denk |
|
Accepted |
| [U-Boot,v3,2/5] arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS |
2011-06-15 |
Holger Brunck |
|
Accepted |
| [U-Boot] Pull request: nand flash |
2011-05-24 |
Scott Wood |
|
Accepted |
| [U-Boot,4/4] cmd_mac: fix help for 'mac read' |
2011-07-15 |
Michael Jones |
|
Accepted |
| [U-Boot,2/4] common: make abortboot available for pxecfg use |
2011-06-06 |
Jason Hobbs |
|
Changes Requested |
| [U-Boot,2/5] nand_util: convert nand_write_skip_bad() to flags |
2011-04-28 |
Ben Gardiner |
|
Changes Requested |
| [U-Boot] led: added cmd_led to Makefile |
2011-04-20 |
Jason Kridner |
|
Accepted |
| [U-Boot] Kirkwood: SATA supports only one device per bus |
2011-03-29 |
Gray Remlin |
|
Changes Requested |
| [U-Boot,1/2] use MAC from environment and add support for new NET_MULTI api in ethernet driver of KS8695 |
2010-11-04 |
Bernstein, Michael |
|
Rejected |
| [U-Boot] MIPS: tb0229: fix GCC 4.6 compile errors and warnings |
2011-12-09 |
Daniel Schwierzeck |
|
Superseded |
| [U-Boot] MX31: change return value of get_cpu_rev |
2011-04-29 |
Stefano Babic |
|
Changes Requested |
| [U-Boot,X86] Add a target for running as a coreboot payload |
2011-11-04 |
Gabe Black |
|
Superseded |
| [U-Boot,2/4] tegra2: Call gpio_request for SDMMC GPIOs |
2011-09-30 |
Stephen Warren |
|
Superseded |
| [U-Boot] minor improvements for env tools |
2011-09-05 |
Luka Perkov |
|
Changes Requested |
| [U-Boot,RFC,MMC] Is the HIGH_SPEED_SUPPORT bit checked wrong in mmc.c? |
2011-11-03 |
Macpaul Lin |
|
RFC |
| [U-Boot] part_efi: fix build warning |
2011-10-31 |
Lei Wen |
|
Rejected |
| [U-Boot] powerpc/p2041: skip waiting for SERDES bank 3 reset done |
2013-01-23 |
Anatolij Gustschin |
|
Rejected |
| [U-Boot] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-05-21 |
Piotr Wilczek |
|
New |
| [U-Boot,v3,2/5] Kirkwood: allow to override CONFIG_SYS_TCLK |
2011-05-02 |
Simon Guinot |
|
Superseded |
| [U-Boot,1/3] misc:pmic: Support for voltage to register value conversion function |
2012-03-28 |
Łukasz Majewski |
|
Superseded |
| [U-Boot,v2,6/7] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual |
2011-05-03 |
Holger Brunck |
|
Accepted |
| [U-Boot,v3,5/5] net/tftp.c: fix typo |
2011-05-17 |
Luca Ceresoli |
|
Accepted |
| [U-Boot,5/5,v2] microblaze: Copy bootfile from variables |
2011-10-07 |
Michal Simek |
|
Accepted |
| [U-Boot,v2,1/3] image: Make image_get_fdt work like image_get_{ram_disk, kernel} |
2011-11-01 |
Stephen Warren |
|
Changes Requested |
| [U-Boot,V2,05/13] i2c: Create common default i2c_set_bus_num() function |
2011-10-10 |
Stefano Babic |
|
Superseded |
| [U-Boot,v2,3/3] image: Allow images to indicate they're loadable at any address |
2011-11-01 |
Stephen Warren |
|
Rejected |
| [U-Boot,1/4,v3] nand_base: trivial: fix comment read/write comment |
2011-05-24 |
Ben Gardiner |
|
Accepted |
| [U-Boot] beagle: pass expansionboard name in bootargs |
2011-08-11 |
Joel Fernandes |
|
Accepted |
| [U-Boot,1/6] README: remove spurious line |
2011-04-14 |
Luca Ceresoli |
|
Accepted |
| [U-Boot] MPC8260: Fix compile problems with "hymod" board |
2011-05-01 |
Wolfgang Denk |
|
Accepted |
| [U-Boot] Pull request for u-boot-coldfire.git |
2011-10-18 |
Jin Zhengxiong-R64188 |
|
Accepted |
| [U-Boot] Pull request: nand flash |
2011-10-10 |
Scott Wood |
|
Accepted |
| [U-Boot] tools: build some commands without -pedantic |
2011-07-12 |
Linus Walleij |
|
Rejected |
| [U-Boot,V6,1/5] mv: seperate kirkwood and armada from common setting |
2011-01-25 |
Lei Wen |
|
Superseded |
| [U-Boot,V8,5/5] Pantheon: Add Board Support for Marvell dkb board |
2011-01-28 |
Lei Wen |
|
Accepted |
| [U-Boot,v2,20/21] keymile boards: support of boardId / hwkey lists |
2011-03-15 |
Heiko Schocher |
|
Accepted |
| [U-Boot,V8,3/5] serial: add pantheon soc support |
2011-01-28 |
Lei Wen |
|
Accepted |
| [U-Boot,3/5] serial: add pantheon soc support |
2011-01-19 |
Lei Wen |
|
Superseded |
| [U-Boot,V6,3/5] serial: add pantheon soc support |
2011-01-25 |
Lei Wen |
|
Superseded |
| [U-Boot,V7,3/5] serial: add pantheon soc support |
2011-01-26 |
Lei Wen |
|
Superseded |
| [U-Boot,7/8] net/tftp.c: cosmetic: fix indentation |
2011-05-14 |
Luca Ceresoli |
|
Accepted |
| [U-Boot] omap3evm: Pass 'mem' argument to linux kernel |
2011-09-27 |
Sanjeev Premi |
|
Changes Requested |
| [U-Boot,2/2] SPL: omap4: Reduce the maximum size of SPL to 32K bytes. |
2011-09-27 |
SRICHARAN R |
|
Changes Requested |
| [U-Boot,PATCHv2] omap3evm: Pass 'mem' argument to linux kernel |
2011-09-27 |
Sanjeev Premi |
|
Changes Requested |
| [U-Boot,3/4] USB: Fix anti-aliasing complaints in OHCI-HCD |
2011-08-20 |
Marek Vasut |
|
Changes Requested |
| [U-Boot] Coldfire 5235 flexbus.h |
2011-03-28 |
Jate Sujjavanich |
|
Changes Requested |
| [U-Boot,GIT,PULL] u-boot-mpc83xx - couple of minor fixes |
2011-02-05 |
Kim Phillips |
|
Accepted |
| [U-Boot,4/4,V5] I2C: mxc_i2c rework |
2011-10-14 |
Anatolij Gustschin |
|
Superseded |
| [U-Boot,2/2] mpc83xx: Implement interrupt support for mpc83xx |
2011-10-05 |
Joe Hershberger |
|
Superseded |
| [U-Boot,v2,2/2] mpc83xx: Implement interrupt support for mpc83xx |
2011-10-06 |
Joe Hershberger |
|
Superseded |
| [U-Boot,23/30] km/common: replace env var checkboardidlist by function |
2011-04-08 |
Valentin Longchamp |
|
Changes Requested |
| [U-Boot] Pull request: u-boot-video/master |
2011-04-28 |
Anatolij Gustschin |
|
Accepted |
| [U-Boot] ftgmac100: support of gigabit eth ftgmac100 |
2010-12-10 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v6,01/13] nds32: add header files support for nds32 |
2011-03-24 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v6,03/13] nds32: config.mk of NDS32 architecture |
2011-03-24 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v6,04/13] nds32/core N1213: NDS32 N12 core family N1213 |
2011-03-24 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v6,05/13] nds32/ag101: dev offset header of SoC ag101 |
2011-03-24 |
Macpaul Lin |
|
Superseded |
| [U-Boot,2/4,v2] nand_util: convert nand_write_skip_bad() to flags |
2011-05-19 |
Ben Gardiner |
|
Superseded |
| [U-Boot,v6,11/13] nds32/ag101/adp-ag101: add config adp-ag101.h |
2011-03-24 |
Macpaul Lin |
|
Superseded |
| [U-Boot,3/4,v2] nand_util: drop trailing all-0xff pages if requested |
2011-05-19 |
Ben Gardiner |
|
Superseded |
| [U-Boot,v8,10/10] adp-ag101: add board adp-ag101 support |
2011-04-11 |
Macpaul Lin |
|
Superseded |
| [U-Boot,v9,05/10] nds32/ag101: lowlevel_init.S of ag101 |
2011-05-02 |
Macpaul Lin |
|
Changes Requested |
| [U-Boot,4/4,v2] cmd_nand: add nand write.trimffs command |
2011-05-19 |
Ben Gardiner |
|
Superseded |
| [U-Boot,v9,10/10] adp-ag101: add board adp-ag101 support |
2011-05-02 |
Macpaul Lin |
|
Changes Requested |
| [U-Boot,2/2] powerpc/85xx: verify the device tree before booting Linux |
2011-05-02 |
Timur Tabi |
|
Superseded |
| [U-Boot,v3,1/5] sf: disable write protection for Macronix flash |
2011-05-02 |
Simon Guinot |
|
Changes Requested |
| [U-Boot] sntp: fix problems at setting RTC at multi-bus I2C systems |
2011-05-02 |
Trübenbach, Ralf |
|
Rejected |
| [U-Boot,2/2] MIPS: Coding style cleanups on common assembly files |
2011-04-09 |
Shinya Kuribayashi |
|
Changes Requested |
| [U-Boot,v4,3/5] mv-common.h: fix DRAM banks configuration |
2011-05-02 |
Simon Guinot |
|
Superseded |
| [U-Boot,v4,1/5] sf: disable write protection for Macronix flash |
2011-05-02 |
Simon Guinot |
|
Accepted |
| [U-Boot,v5,3/5] mv-common.h: fix DRAM banks configuration |
2011-05-02 |
Simon Guinot |
|
Accepted |
| [U-Boot,V2,2/2] arm: Tegra2: GPIO: enable GPIO for Tegra2 boards |
2011-05-02 |
Tom Warren |
|
Superseded |
| [U-Boot,3/3] ARMV7: Vexpress: Add MMC support |
2011-02-25 |
matt.waddel@linaro.org |
|
Superseded |
| [U-Boot] ASIX: Fix buffer access in asix_get_phy_addr() |
2011-09-23 |
Marek Vasut |
|
Accepted |
| [U-Boot] powerpc/mpc8xxx: Fix ddr build error |
2011-10-03 |
Becky Bruce |
|
Superseded |
| [U-Boot,1/4] MergerBox: Add board config file. |
2011-04-14 |
Andre Schwarz |
|
Changes Requested |
| [U-Boot,v2,2/3] arm: omap: innovator: Prepare for mach-types.h changes |
2011-05-03 |
Igor Grinberg |
|
Changes Requested |
| [U-Boot] 85XX: Fix pin muxing for second USB controller |
2011-06-27 |
Felix Radensky |
|
Accepted |
| [U-Boot,v2,7/9] Adding more SPD registers |
2010-12-17 |
York Sun |
|
Accepted |
| [U-Boot,2/6] NET: pass source IP address to packet handlers |
2011-04-14 |
Luca Ceresoli |
|
Accepted |
| [U-Boot] MPC837x: set i2c1_clk Running on mpc837x without CONFIG_FSL_ESDHC leads to i2c1_clk not being set at all. It is bound to clock of encryption module. fix this. |
2011-04-14 |
Andre Schwarz |
|
Accepted |
| [U-Boot,3/5] gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs |
2010-10-27 |
Prafulla Wadaskar |
|
Superseded |
| [U-Boot,v4,2/6] SMDK6400: Fix some label undefined in build error |
2011-01-21 |
seedshope |
|
Rejected |
